Parker PS Series Inline and 90 Degree Elbow, High Pressure Swivels (hydraulic) up to 5000 psi
Parker PS系列直列和90度彎頭，高壓旋轉（液壓）高達5000 psi
Parker Fittings接頭 - Hose Fittings

派克Parker PS系列旋轉接頭（液壓）高達5000 psi，旨在消除可能導致軟管過早損壞的軟管扭曲和扭矩。這些旋轉接頭具有全流量，密封的軸承設計，并帶有硬化的軸承座圈，可以抵抗側向載荷并適用于高壓。PS系列旋轉接頭可提供90°和直列配置，并具有多種端口端，使其非常適合各種動態應用。有關最大速度與壓力的建議，請參考產品支持標簽下的目錄pdf。 Parker's swivels are designed to eliminate hose twist and torque that may contribute to premature hose failure. PS Series Swivels (hydraulic) up to 5000 psi, are designed to eliminate hose twist and torque that may cause premature hose failure. These Swivels have a full flow, sealed bearing design with hardened bearing races that are resistant to side load and are suitable for high pressure. PS Series swivels are available in 90° and in-line configurations with a wide variety of port ends, making them ideal for an array of dynamic applications. Consult the catalog pdf under the Product Support tab for max speed vs pressure recommendations.

PS Series Inline and 90 Degree Elbow, High Pressure Swivels (hydraulic) up to 5000 psi

技術特性：
- 尺寸：1/4“ – 2”
- 材料：碳鋼，316不銹鋼
- 軸端口端：NPTF外螺紋，NPTF內螺紋，JIC 37度外螺紋，SAE O型圈外螺紋直螺紋，密封圈外螺紋，內螺紋SAE直螺紋
- 外殼端口端：NPTF外螺紋（非標準），NPTF外螺紋，JIC外螺紋37度，SAE O型圈外螺紋直螺紋，密封外螺紋，JIC 37度外螺紋，NPSM內螺紋內螺紋，SAE內螺紋外螺紋
- 密封選項：腈，黃麻，乙烯丙烯，碳氟化合物，氯丁橡膠
- 可選的鍍鎳

市場：
- 工業
- 建筑
- 農業

特性/優點：
- 設計用于全流量和最小壓降
- 密封軸承免受介質和外部污染物的影響
- 軸承座圈經過硬化和設計，可最大程度地減少磨損并延長使用壽命
- 1-1 / 4“至2”尺寸的滾針軸承和滾珠軸承可提供額外的側向載荷抵抗力
- 消除了工作設備運動引起的軟管扭曲和扭矩

應用：
- 高空作業設備
- 軟管卷盤
- 鉸接臂設備
- 垃圾車

Technical Characteristics:
- Sizes: 1/4” – 2”
- Materials: Carbon Steel, 316 Stainless Steel
- Shaft Port Ends: Male NPTF, Female NPTF, Male JIC 37 degree, Male SAE O-Ring Straight Thread, Male seal-lok, Female SAE Straight Thread
- Housing Port Ends: Male NPTF (non-standard), Female NPTF, Male JIC 37 degree, Male SAE O-Ring Straight Thread, Male seal-lok, Female JIC 37 degree, Female NPSM Pipe Swivel, Female SAE Straight Thread
- Seal Options: Nitrile, Aflas, Ethylene Propylene, Fluorocarbon, Neoprene
- Optional Nickel plating

Markets:
- Industrial
- Construction
- Agriculture

Features/Benefits:
- Designed for full flow and minimal pressure drop
- Sealed bearing is protected from media and external contaminants
- Bearing race is hardened and designed to minimize wear and extend service life
- Sizes 1-1/4" to 2" have needle bearings and ball bearings to provide additional side load resistance
- Eliminates hose twist and torque caused by the movement of working equipment

Applications:
- Aerial lift equipment
- Hose reels
- Articulating arm equipment
- Refuse trucks

Technical Specifications

Inline and 90 Degree Elbow, High Pressure Swivels (hydraulic) up to 5000 psi - PS Series型號