Parker Fittings 黃銅接頭 Compression Fittings
Brass Compression Fittings, Compress-Align

Parker 的 Compress-Align 接頭無需擴口、焊接或其他管道準備工作。系留套筒始終朝向正確安裝，安裝前后可見以供檢查。Parker 經濟實惠的 Compress-Align 接頭預裝配有固定套筒，該套筒始終正確定向，以便更快地組裝。固定套管在安裝前后進行可見檢查，套管的設計對齊以密封甚至不圓的管道。由于額定壓力較高，Compress-Align 可用于許多使用擴口接頭的區域，這意味著無需擴口、焊接或管道準備，從而加快安裝速度。Compress-Align 機構可與標準壓縮機構互換，因此減少了庫存。
與銅、鋁和以下 Parker Parflex Division 管一起使用。

Brass Compression Fittings, Compress-Align

Parker's Compress-Align fittings require no flaring, soldering or other preparation of tubing. The captive sleeve is always oriented for correct installation, visible for inspection before and after installation. Parker's economical Compress-Align fittings are pre-assembled with a captive sleeve which is always oriented correctly for faster assembly. The captive sleeve gives a visible inspection before and after installation and the design of the sleeve aligns to seal even out-of-round tubing. Compress-Align can be used in many areas where flare fittings are used due to the higher pressure rating, meaning no flaring, soldering or tube preparation resulting in faster installation. Compress-Align bodies are interchangeable with standard compression bodies so inventory is decreased. Use with copper, aluminum and the following Parker Parflex Division tubing.

- 聚乙烯
- 尼龍
- 聚丙烯
- PTFE
- FEP
- PFA

市場：
- 工業
- 氣動
- 包裝
- 自動化
- 化工
- 壓縮機
- 水過濾

特性/優點：
- 全黃銅結構
- 固定套筒
- 與標準壓縮接頭相比具有更高的工作壓力
- 主體可與標準壓縮體互換
- 經濟
- 用手?jǐn)Q一圈扳手即可組裝所有尺寸
- 1/8" 通過 1” 可用尺寸
- UL 列出易燃液體

應用：
- 空氣管路
- 潤滑管路
- 流體傳輸
- 化學品分配
- 冷卻管路
- 機床

可根據要求提供定制配置和尺寸。聯系我們獲取更多信息。

- Polyethylene
- Nylon
- Polypropylene
- PTFE
- FEP
- PFA

Markets:
- Industrial
- Pneumatic
- Packaging
- Automation
- Chemical
- Compressors
- Water filtration

Features/Benefits:
- All brass construction
- Captive sleeve
- Higher working pressures versus standard compression fitting
- Bodies interchangeable with standard compression bodies
- Economical
- One wrench turn from finger tight for assembly for all sizes
- 1/8" through 1" sizes available
- U.L. listed for flammable liquids

Applications:
- Air lines
- Lubrication lines
- Fluid transfer
- Chemical dispensing
- Cooling lines
- Machine tool

Custom configurations and sizes are available upon request. Contact us for additional information.

Technical Specifications

Brass Compression Fittings, Compress-Align型號