Parker H-Series distribution manifold unit

Parker 針閥 - Parker Needle Valves
6,000 PSI Distribution Manifold - H Series

派克 6,000 PSI 分配歧管 - H 系列分配歧管閥單元 | #HCDMS53STRATNC

派克的 H 系列分配歧管閥單元提供 5 或 10 金屬閥座針閥選擇，帶有 PTFE 壓蓋填料、“H”系列頭組件，易于操作和可靠的氣密關閉。派克H 系列分配歧管閥提供緊湊的歧管主體，可接受用戶定義的 5 個或 10 個金屬密封針閥 - 額定壓力高達 6000 PSI (414 Bar)。用戶還可以指定多種構建選項，包括添加連接到入口的單個隔離閥。作為標準，將提供 2 個連接（普通尺寸的每一端一個）。其中一個將被用戶用作入口，另一個可以關閉或安裝閥門以方便清洗。如果需要凈化閥，則應在詢價階段明確說明型號。Parker 可以將單個隔離閥連接到入口，作為主隔離閥，允許用戶將所有出口閥與供應點完全隔離。這樣的要求必須在查詢階段說明，閥門類型應明確規定。這些額外的閥門要求將在報價階段納入零件編號。

Parker 6,000 PSI Distribution Manifold - H Series

市場：
- 海上
石油和天然氣
- 陸上石油和天然氣- 石化
- 化學

特性/優點：
- 帶有保留操作鍵的球形針閥金屬/金屬閥座
- 5 或 10 個閥門（5 和 10 之間將作為 10 路供應 -冗余出口可由用戶堵塞）

應用：
- 低壓儀表空氣或工廠空氣的分配和控制
- 高壓儀表或液壓管路

Parker H-Series distribution manifold unit offers choice of 5 or 10 metal seated needle valves with PTFE gland packing, ‘H' series head assemblies for easy operation and positive bubble tight shut off. H Series Distribution manifold valve provides a compact manifold body that accepts a user-defined choice of five or 10 metal-seated needle valves - rated for pressures up to 6000 PSI (414 Bar). Users can also specify numerous build options including the addition of a single isolate valve connected to the inlet. As standard, 2 connections (one at each end of common size) will be provided. One of these will be utilised by the user as an inlet, the other can be either blanked off or fitted with a valve to facilitate purging. Should a purge valve be required then the style should be clearly stated at enquiry stage. Parker can connect a single isolate valve to the inlet to act as a primary isolate valve allowing the user to totally isolate all the outlet valves from the supply point. Such a requirement must be stated at enquiry stage, the valve style should be clearly specified. These additional valve requirements will be structured into the part number at quotation stage.

Markets:
- Oil and Gas Offshore
- Oil and Gas Onshore
- Petrochemical
- Chemical

Features/Benefits:
- Globe style needle valve metal/metal seat with retained operating key
- 5 or 10 valves (between 5 & 10 will be supplied as 10 way - redundant outlets can be plugged by user)

Applications:
- Distribution and control of low pressure instrument air or plant air
- High pressure instrument or hydraulic lines

Technical Specifications

6,000 PSI Distribution Manifold - H Series 型號