|
|
|
|
Barksdale Series L20517 pressure regulators
壓力調節器
Series L20517 Description
Barksdale壓力調節器是敏感的壓力控制裝置，用于在液壓回路中保持預先確定的壓力。調節的輸出壓力可以由彈簧或馬達（液壓或氣動）的力控制。設計特點確保卓越的精度、重復性和高流量系數。Barksdale's pressure regulators are sensitive pressure-control devices used to maintain a pre-determined pressure in a hydraulic circuit. The regulated output pressure can be controlled either by the force of a spring, or a motor (hydraulic or pneumatic). Design features ensure excellent accuracy, repeatability and high flow coefficients.
設計用于提供多年無故障運行和幾乎零泄漏，剪切密封?設計使用流體壓力來保持無泄漏的金屬對金屬密封，隨著使用而改進。轉子和壓力密封之間的剪切作用不斷地重疊配合面，防止污染物在密封面之間倒伏。其結果是閥門不會磨損，但隨著時間的推移會逐漸磨損，從而在產品的整個生命周期內為您提供始終如一的卓越控制。Designed to provide years of trouble-free operation and virtually zero leakage, the Shear-Seal? design uses fluid pressure to maintain a leak-free metal-to-metal seal that improves with use. The shearing action between the rotor & pressure seal continually laps the mating surfaces and prevents contaminates from lodging between the sealing surfaces. The result is a valve that doesn’t wear out – but wears in over time, providing you superior control consistently through the entire life of the product.
Barksdale Series L20517 pressure regulators
壓力調節器
Features
Original Shear-Seal? technology
High flow capacity
Large regulated pressure range
Tolerates contaminated media
Fail-safe motor control options
Self venting
Surge dampening
- Applications應用
Land-based oil drilling controls陸上石油鉆探控制
BOP control units 防噴器控制裝置
Pressure sensitive equipment
壓敏設備
Technical specifications -General Specifications*
Pressure:
Supply/Inlet Pressures:
Regulated Pressure Range at 3,000 psi Supply Pressure:
High Sensitivity:
Full Range:
Regulated Pressure Range at 5,000 psi Supply Pressure:
High Sensitivity:
Full Range:
Ambient Temperature Range:
Inlet Proof Pressure:
Case Proof Pressure: |
3,000 psi (207 bar)
5,000 psi (345 bar)
300 - 1600 psi (21 - 110 bar)
300 - 2800 psi (21 - 193 bar)
500 - 1600 psi (34 - 110 bar)
500 - 3000 psi (34 - 207 bar)
-30° to +185°F (-34° to +85°C)
7,500 psi (517 bar)
4,500 psi (310 bar) |
Flow:
Flow Rate:
Cv Inlet:
Cv Vent: |
120 GPM (@ 50 ft/s)
17.5
1.6 |
Porting:
Supply 1:
Supply 2:
Outlet (Regulated):
Vent: |
1” NPT Standard, SAE Optional
1” NPT Standard, SAE Optional
1-1/2” NPT Standard, SAE Optional
1” NPT Standard, SAE Optional |
Materials of Construction:
Body, Flanges, & Spring Housing:
Slide, Inlet, Vent, & Blocking Plates:
Hardware:
O'ring Material:
Backup Ring Material:
Socket Head Screws:
Wetted Parts: |
Phosphate coated carbon steel/ductile iron
400 Series stainless steel
Plated alloy steel, 300 series stainless steel
Buna N
Teflon
Zinc plated alloy steel (std.)
Stainless steel |
Pneumatic Pilot Motor (“F” prefix):
Pilot Motor Working Pressure:
Porting A & B:
Operating Temperature Range: |
80 - 120 psi (5.5 - 8.3 bar)
1/4” NPT
-30° to +185°F (-34° to +85°C) |
Hydraulic Pilot Motor (“G” prefix):
Pilot Motor Working Pressure:
Porting A & B:
Operating Temperature Rating: |
400 - 1600 psi (6.9 - 110 bar)
SAE for 3/8” Tube (Size -6)
-30° to +185°F (-34° to +85°C) |
Approximate Shipping Weight:
Manual Unit:
Pneumatic Motor Unit:
Hydraulic Motor Unit: |
70 lbs. (31.8 kg)
90 lbs. (40.8 kg)
90 lbs. (40.8 kg) |
| * See product configurator for additional options. |
|
