|
EATON Hansen氣動單向關斷快速接頭
Hansen Pneumatic Couplings One-Way Single Shut Off by Hansen Couplings
EATON Hansen 氣動快速接頭:
球型鎖定、單向切斷快速接頭
標準：集團內部標準
接口尺寸：1/8″至3/4″
壓力范圍：高達207bar
標準材質：黃銅（鍍鎳）、鋼（鍍鎳鋅）、塑膠、不銹鋼、
密封材料：Buna-N（丁腈橡膠）、EPDM（乙丙橡膠）、VITON（氟橡膠）、SILICONE（硅橡膠）
應用范圍：壓縮空氣、氣體或液體、吸氣設備、焊接、醫療器械、加工設備、大流量氣動設備。
【EATON Hansen氣動安全接頭】
按鈕式單向切斷安全接頭，適用于低壓氣體，符合ISO4414標準，能提供良好的人機環境。
標準：ISO6150B，ISO6150C，ARO-profile
接口尺寸：1/4″至1/2″（直徑5.5至11）
壓力范圍：高達16bar
標準材質：鋁
密封材料：buna-N(丁腈橡膠)
應用范圍：壓縮空氣
【氣體接頭】
球型單向切斷安全接頭，應用于各種燃料氣體。
標準：集團內部標準（同ANSI Z21.41標準及CSA6.9-M98標準）
接口尺寸：3/8″至1/4″
壓力范圍：高達305毫米水柱
標準材質：黃銅
密封材料：Viton（氟橡膠）
應用范圍：煤氣灶、烤箱、移動餐車
EATON Hansen 氣動快速接頭產品系列：
EATON Hansen 1000/400/500系列
EATON Hansen 3000/4000/5000/6000系列
EATON Hansen PS30/P-40系列
EATON Hansen AUTO-FLO 23/24系列
EATON Hansen 180/280系列
EATON Hansen 600/700系列
EATON Hansen 2RL/3RL系列
EATON Hansen SAFELINE系列
EATON Hansen 80系列
EATON Hansen 380系列
EATON Hansen G600系列
EATON Hansen 1900
EATON Hansen T1300系列
EATON Hansen CC series
Eaton’s CC Series
Eaton’s 1000/400/500 Series
Eaton’s 3000/4000/5000/6000 Series
Eaton’s P30/P40 Series
Eaton’s Auto-Flo 23/24 Series of pneumatic couplings
Eaton’s Safeline Series
Eaton’s 180/280 series
Eaton’s 100 Series quick disconnect couplings
Eaton’s 600/700 Series quick connect couplings
Eaton’s 2RL/3RL ring lock series quick disconnect pneumatic couplings
Eaton’s Full-Bore Series is a premium automatic one-way shutoff quick disconnect coupling
Eaton’s 210/310 series pneumatic couplings
Eaton’s MS Series is an automatic one-way shut off quick disconnect pneumatic coupling
Eaton’s FD14 Series Oil Drain Coupling
Manufacturer: Hansen Couplings
Hansen single shut-off couplings have a check valve in one half, usually the socket half and no valve in the mating half referred to as plug?This design is normally used in pneumatic compressed air?systems or?where spillage of fluid on the down-stream side is unimportant. Single shut-off couplings are normally installed with the valved half on the pressure side of the circuit to provide automatic shut-off flow when the coupling is disconnected.
This type of Hansen coupling is commonly associated with compressed air systems. However, the coupling is used on many other applications including lubrication, paint spray, and carpet cleaning equipment.Single shut-off Hansen couplings?normally have low working pressure capabilities ranging from 100 to 300 PSI.The Hansen?One way couplings?are commonly made from brass or steel
Features:
The original automatic one-way shutoff coupling designed by HansenThe Industry Standard Rugged, reliable Easy, automatic, push-to-connect design provides instantaneous connection and isconnection of lines, plus automatic shut-off of socket end of line 1/4" and 1/2" sockets accept MIL-C-4109 plug
Special Materials:
Socket
Brass Body
Zinc Plated Steel Valve
Buna-N (Nitrile) Seal
Stainless steel springs
Stainless steel locking balls
Plug Zinc Plated Case-Hardened Steel (All Sizes)
Brass (All Sizes)
Stainless Steel (Series 3000)
|
SOCKETS |
| Part Number |
Nominal Diameter |
End Connection |
Thread Detail |
Dust Plugs |
|
Series 3000 |
| 2900 |
1/4" |
Male Thread |
1/8-27 NPTF |
P-SDC-1-HK |
| 3100 |
1/4" |
Male Thread |
1/4-18 NPTF |
P-SDC-1-HK |
| 3300 |
1/4" |
Male Thread |
3/8-18 NPTF |
P-SDC-1-HK |
| 3000-43 |
1/4" |
Male Thread |
7/16-20 |
P-SDC-1-HK |
| 3000-63 |
1/4" |
Male Thread |
5/8-18 |
P-SDC-1-HK |
| 2800 |
1/4" |
Female Thread |
1/8-27 NPTF |
P-SDC-1-HK |
| 3000 |
1/4" |
Female Thread |
1/4-18 NPTF |
P-SDC-1-HK |
| 3200 |
1/4" |
Female Thread |
3/8-18 NPTF |
P-SDC-1-HK |
| 3600 |
1/4" |
Hose Stem |
1/4" |
P-SDC-1-HK |
| 3600P |
1/4" |
Hose Stem |
1/4" |
P-SDC-1-HK |
| 3700 |
1/4" |
Hose Stem |
3/8" |
P-SDC-1-HK |
| 3700P |
1/4" |
Hose Stem |
3/8" |
P-SDC-1-HK |
| 3800 |
1/4" |
Hose Stem |
5/16" |
P-SDC-1-HK |
| 3-SA0 |
1/4" |
Hose Clamp |
ID 3/16" OD 7/16" |
P-SDC-1-HK |
| 3-SA3 |
1/4" |
Hose Clamp |
ID 3/16" OD 1/2" |
P-SDC-1-HK |
| 3-SB1 |
1/4" |
Hose Clamp |
ID 1/4" OD 15/32" |
P-SDC-1-HK |
| 3-SB3 |
1/4" |
Hose Clamp |
ID 1/4" OD 1/2" |
P-SDC-1-HK |
| 3-SB5 |
1/4" |
Hose Clamp |
ID 1/4" OD 9/16" |
P-SDC-1-HK |
| 3-SB7 |
1/4" |
Hose Clamp |
ID 1/4" OD 5/8" |
P-SDC-1-HK |
| 3-SB9 |
1/4" |
Hose Clamp |
ID 1/4" OD 11/16" |
P-SDC-1-HK |
| 3-SB11 |
1/4" |
Hose Clamp |
ID 1/4" OD 3/4" |
P-SDC-1-HK |
| 3-SC5 |
1/4" |
Hose Clamp |
ID 5/16" OD 9/16" |
P-SDC-1-HK |
| 3-SC7 |
1/4" |
Hose Clamp |
ID 5/16" OD 5/8" |
P-SDC-1-HK |
| 3-SC9 |
1/4" |
Hose Clamp |
ID 5/16" OD 11/16" |
P-SDC-1-HK |
| 3-SD5 |
1/4" |
Hose Clamp |
ID 3/8" OD 9/16" |
P-SDC-1-HK |
| 3-SD7 |
1/4" |
Hose Clamp |
ID 3/8" OD 5/8" |
P-SDC-1-HK |
| 3-SD9 |
1/4" |
Hose Clamp |
ID 3/8" OD 11/16" |
P-SDC-1-HK |
| 3-SD11 |
1/4" |
Hose Clamp |
ID 3/8" OD 3/4" |
P-SDC-1-HK |
| 3-SD13 |
1/4" |
Hose Clamp |
ID 3/8" OD 13/16" |
P-SDC-1-HK |
|
Series 4000 |
| 4100-A |
3/8" |
Male Thread |
1/8-27 NPTF |
P-SDC-2-HK |
| 4100 |
3/8" |
Male Thread |
1/4-18 NPTF |
P-SDC-2-HK |
| 4300 |
3/8" |
Male Thread |
3/8-18 NPTF |
P-SDC-2-HK |
| 4500 |
3/8" |
Male Thread |
1/2-14 NPTF |
P-SDC-2-HK |
| 4000-A |
3/8" |
Female Thread |
1/8-27 NPTF |
P-SDC-2-HK |
| 4000 |
3/8" |
Female Thread |
1/4-18 NPTF |
P-SDC-2-HK |
| 4200 |
3/8" |
Female Thread |
3/8-18 NPTF |
P-SDC-2-HK |
| 4400 |
3/8" |
Female Thread |
1/2-14 NPTF |
P-SDC-2-HK |
| 40400 |
3/8" |
Hose Stem |
1/4" |
P-SDC-2-HK |
| 40500 |
3/8" |
Hose Stem |
5/16" |
P-SDC-2-HK |
| 40600 |
3/8" |
Hose Stem |
3/8" |
P-SDC-2-HK |
| 40800 |
3/8" |
Hose Stem |
1/2" |
P-SDC-2-HK |
| 4-SB3 |
3/8" |
Hose Clamp |
ID 1/4" OD 1/2" |
P-SDC-2-HK |
| 4-SB5 |
3/8" |
Hose Clamp |
ID 1/4" OD 9/16" |
P-SDC-2-HK |
| 4-SB7 |
3/8" |
Hose Clamp |
ID 1/4" OD 5/8" |
P-SDC-2-HK |
| 4-SB9 |
3/8" |
Hose Clamp |
ID 1/4" OD 11/16" |
P-SDC-2-HK |
| 4-SB11 |
3/8" |
Hose Clamp |
ID 1/4" OD 3/4" |
P-SDC-2-HK |
| 4-SC7 |
3/8" |
Hose Clamp |
ID 5/16" OD 5/8" |
P-SDC-2-HK |
| 4-SD5 |
3/8" |
Hose Clamp |
ID 3/8" OD 9/16" |
P-SDC-2-HK |
| 4-SD7 |
3/8" |
Hose Clamp |
ID 3/8" OD 5/8" |
P-SDC-2-HK |
| 4-SD9 |
3/8" |
Hose Clamp |
ID 3/8" OD 11/16" |
P-SDC-2-HK |
| 4-SD11 |
3/8" |
Hose Clamp |
ID 3/8" OD 3/4" |
P-SDC-2-HK |
| 4-SD15 |
3/8" |
Hose Clamp |
ID 3/8" OD 7/8" |
P-SDC-2-HK |
| 4-SP13 |
3/8" |
Hose Clamp |
ID 1/2" OD 13/16" |
P-SDC-2-HK |
| 4-SP15 |
3/8" |
Hose Clamp |
ID 1/2" OD 7/8" |
P-SDC-2-HK |
| 4-SP17 |
3/8" |
Hose Clamp |
ID 1/2" OD 15/16" |
P-SDC-2-HK |
| 4-SP19 |
3/8" |
Hose Clamp |
ID 1/2" OD 1" |
P-SDC-2-HK |
|
Series 5000 |
| 50100 |
1/2" |
Male Thread |
1/4-18 NPTF |
| 5100 |
1/2" |
Male Thread |
3/8-18 NPTF |
| 5300 |
1/2" |
Male Thread |
1/2-14 NPTF |
| 5500 |
1/2" |
Male Thread |
3/4-14 NPTF |
| 5000-A |
1/2" |
Female Thread |
1/4-18 NPTF |
| 5000 |
1/2" |
Female Thread |
3/8-18 NPTF |
| 5200 |
1/2" |
Female Thread |
1/2-14 NPTF |
| 5400 |
1/2" |
Female Thread |
3/4-14 NPTF |
| 50400 |
1/2" |
Hose Stem |
1/4" |
| 50500 |
1/2" |
Hose Stem |
5/16" |
| 5700 |
1/2" |
Hose Stem |
3/8" |
| 5800 |
1/2" |
Hose Stem |
1/2" |
| 5900 |
1/2" |
Hose Stem |
3/4" |
| 5-SD5 |
1/2" |
Hose Clamp |
ID 3/8" OD 9/16" |
| 5-SD7 |
1/2" |
Hose Clamp |
ID 3/8" OD 5/8" |
| 5-SD9 |
1/2" |
Hose Clamp |
ID 3/8" OD 11/16" |
| 5-SD11 |
1/2" |
Hose Clamp |
ID 3/8" OD 3/4" |
| 5-SD13 |
1/2" |
Hose Clamp |
ID 3/8" OD 13/16" |
| 5-SD15 |
1/2" |
Hose Clamp |
ID 3/8" OD 7/8" |
| 5-SP13 |
1/2" |
Hose Clamp |
ID 1/2" OD 13/16" |
| 5-SP15 |
1/2" |
Hose Clamp |
ID 1/2" OD 7/8" |
| 5-SP17 |
1/2" |
Hose Clamp |
ID 1/2" OD 15/16" |
| 5-SP19 |
1/2" |
Hose Clamp |
ID 1/2" OD 1" |
| 5-SR23 |
1/2" |
Hose Clamp |
ID 3/4" OD 1 1/8" |
| 5-SR25 |
1/2" |
Hose Clamp |
ID 3/4" OD 1 3/16" |
| 5-SR27 |
1/2" |
Hose Clamp |
ID 3/4" OD 1 1/4" |
|
Series 6000 |
| 6300 |
3/4" |
Male Thread |
1/2-14 NPTF |
| 6500 |
3/4" |
Male Thread |
3/4-14 NPTF |
| 6700 |
3/4" |
Male Thread |
1-11 1/2 NPTF |
| 6200 |
3/4" |
Female Thread |
1/2-14 NPTF |
| 6400 |
3/4" |
Female Thread |
3/4-14 NPTF |
| 6600 |
3/4" |
Female Thread |
1-11 1/2 NPTF |
| 6800 |
3/4" |
Hose Stem |
1/2" |
| 6900 |
3/4" |
Hose Stem |
3/4" |
| 7000 |
3/4" |
Hose Stem |
1" |
|
PLUGS |
| Part Number |
End Connection |
Thread Detail |
Dust Caps |
Notes |
|
Series 3000 |
| 10 |
Male Thread |
1/4-18 NPTF |
PDC-3000 |
| 10C |
Male Thread |
1/4-18 NPTF |
PDC-3000 |
With ball check |
| 10G |
Male Thread |
1/4-18 NPTF |
PDC-3000 |
With bleeder ball check |
| 12 |
Male Thread |
1/8-27 NPTF |
PDC-3000 |
| 12G |
Male Thread |
1/8-27 NPTF |
PDC-3000 |
With bleeder ball check |
| 14 |
Male Thread |
3/8-18 NPTF |
PDC-3000 |
| 14G |
Male Thread |
3/8-18 NPTF |
PDC-3000 |
With bleeder ball check |
| B-10 |
Male Thread |
1/4-18 NPTF |
PDC-3000 |
Brass |
| LL-10 |
Male Thread |
1/4-18 NPTF |
PDC-3000 |
Stainless |
| 11 |
Female Thread |
1/4-18 NPTF |
PDC-3000 |
| 11G |
Female Thread |
1/4-18 NPTF |
PDC-3000 |
With bleeder ball check |
| 13 |
Female Thread |
1/8-27 NPTF |
PDC-3000 |
| 15 |
Female Thread |
3/8-18 NPTF |
PDC-3000 |
| 11B |
Female Thread |
1/4-18 NPTF |
PDC-3000 |
Brass |
| LL-11 |
Female Thread |
1/4-18 NPTF |
PDC-3000 |
Stainless |
| 16 |
Hose Stem |
1/4" |
PDC-3000 |
| 16G |
Hose Stem |
1/4" |
PDC-3000 |
With bleeder ball check |
| 16P |
Hose Stem |
1/4" |
PDC-3000 |
For use with push-on style hose |
| 16PG |
Hose Stem |
1/4" |
PDC-3000 |
For use with push-on style hose; With bleeder ball check |
| 17 |
Hose Stem |
3/8" |
PDC-3000 |
| 17G |
Hose Stem |
3/8" |
PDC-3000 |
With bleeder ball check |
| 17P |
Hose Stem |
3/8" |
PDC-3000 |
For use with push-on style hose |
| 17PG |
Hose Stem |
3/8" |
PDC-3000 |
For use with push-on style hose; With bleeder ball check |
| 18 |
Hose Stem |
5/16" |
PDC-3000 |
| B-17 |
Hose Stem |
3/8" |
PDC-3000 |
Brass |
| 3-PA0 |
Hose Clamp |
ID 3/16" OD 7/16" |
PDC-3000 |
| 3-PA3 |
Hose Clamp |
ID 3/16" OD 1/2" |
PDC-3000 |
| 3-PB1 |
Hose Clamp |
ID 1/4" OD 15/32" |
PDC-3000 |
| 3-PB3 |
Hose Clamp |
ID 1/4" OD 1/2" |
PDC-3000 |
| 3-PB5 |
Hose Clamp |
ID 1/4" OD 9/16" |
PDC-3000 |
| 3-PB7 |
Hose Clamp |
ID 1/4" OD 5/8" |
PDC-3000 |
| 3-PB9 |
Hose Clamp |
ID 1/4" OD 11/16" |
PDC-3000 |
| 3-PB11 |
Hose Clamp |
ID 1/4" OD 3/4" |
PDC-3000 |
| 3-PC5 |
Hose Clamp |
ID 5/16" OD 9/16" |
PDC-3000 |
| 3-PC7 |
Hose Clamp |
ID 5/16" OD 5/8" |
PDC-3000 |
| 3-PC9 |
Hose Clamp |
ID 5/16" OD 11/16" |
PDC-3000 |
| 3-PD5 |
Hose Clamp |
ID 3/8" OD 9/16" |
PDC-3000 |
| 3-PD7 |
Hose Clamp |
ID 3/8" OD 5/8" |
PDC-3000 |
| 3-PD9 |
Hose Clamp |
ID 3/8" OD 11/16" |
PDC-3000 |
| 3-PD11 |
Hose Clamp |
ID 3/8" OD 3/4" |
PDC-3000 |
| 3-PD13 |
Hose Clamp |
ID 3/8" OD 13/16" |
PDC-3000 |
| 3-PD15 |
Hose Clamp |
ID 3/8" OD 7/8" |
PDC-3000 |
|
Series 4000 |
| 38 |
Male Thread |
1/8-27 NPTF |
| 40 |
Male Thread |
1/4-18 NPTF |
| 40G |
Male Thread |
1/4-18 NPTF |
With bleeder ball check |
| 42 |
Male Thread |
3/8-18 NPTF |
| 42G |
Male Thread |
3/8-18 NPTF |
With bleeder ball check |
| 44 |
Male Thread |
1/2-14 NPTF |
| B-40 |
Male Thread |
1/4-18 NPTF |
Brass |
| B-42 |
Male Thread |
3/8-18 NPTF |
Brass |
| 41 |
Female Thread |
1/4-18 NPTF |
| 41G |
Female Thread |
1/4-18 NPTF |
With bleeder ball check |
| 43 |
Female Thread |
3/8-18 NPTF |
| 43G |
Female Thread |
3/8-18 NPTF |
With bleeder ball check |
| 45 |
Female Thread |
1/2-14 NPTF |
| B-43 |
Female Thread |
3/8-18 NPTF |
Brass |
| 404 |
Hose Stem |
1/4" |
| 406 |
Hose Stem |
3/8" |
| 408 |
Hose Stem |
1/2" |
| B-406 |
Hose Stem |
3/8" |
Brass |
| 4-PB1 |
Hose Clamp |
ID 1/4" OD 15/32" |
| 4-PB3 |
Hose Clamp |
ID 1/4" OD 1/2" |
| 4-PB5 |
Hose Clamp |
ID 1/4" OD 9/16" |
| 4-PB7 |
Hose Clamp |
ID 1/4" OD 5/8" |
| 4-PB9 |
Hose Clamp |
ID 1/4" OD 11/16" |
| 4-PB11 |
Hose Clamp |
ID 1/4" OD 3/4" |
| 4-PD5 |
Hose Clamp |
ID 3/8" OD 9/16" |
| 4-PD7 |
Hose Clamp |
ID 3/8" OD 5/8" |
| 4-PD9 |
Hose Clamp |
ID 3/8" OD 11/16" |
| 4-PD11 |
Hose Clamp |
ID 3/8" OD 3/4" |
| 4-PD13 |
Hose Clamp |
ID 3/8" OD 13/16" |
| 4-PD15 |
Hose Clamp |
ID 3/8" OD 7/8" |
| 4-PP13 |
Hose Clamp |
ID 1/2" OD 13/16" |
| 4-PP15 |
Hose Clamp |
ID 1/2" OD 7/8" |
| 4-PP17 |
Hose Clamp |
ID 1/2" OD 15/16" |
| 4-PP19 |
Hose Clamp |
ID 1/2" OD 1" |
|
Series 5000 |
| 50 |
Male Thread |
1/4-18 NPTF |
P-PDC-2-HK |
| 50G |
Male Thread |
1/4-18 NPTF |
P-PDC-2-HK |
With bleeder ball check |
| 52 |
Male Thread |
3/8-18 NPTF |
P-PDC-2-HK |
| 52G |
Male Thread |
3/8-18 NPTF |
P-PDC-2-HK |
With bleeder ball check |
| 54 |
Male Thread |
1/2-14 NPTF |
P-PDC-2-HK |
| 54G |
Male Thread |
1/2-14 NPTF |
P-PDC-2-HK |
With bleeder ball check |
| 56 |
Male Thread |
3/4-14 NPTF |
P-PDC-2-HK |
| 56G |
Male Thread |
3/4-14 NPTF |
P-PDC-2-HK |
With bleeder ball check |
| B-52 |
Male Thread |
3/8-18 NPTF |
P-PDC-2-HK |
Brass |
| B-54 |
Male Thread |
1/2-14 NPTF |
P-PDC-2-HK |
Brass |
| 53-A |
Female Thread |
1/4-18 NPTF |
P-PDC-2-HK |
| 53 |
Female Thread |
3/8-18 NPTF |
P-PDC-2-HK |
| 53G |
Female Thread |
3/8-18 NPTF |
P-PDC-2-HK |
With bleeder ball check |
| 55 |
Female Thread |
1/2-14 NPTF |
P-PDC-2-HK |
| 55G |
Female Thread |
1/2-14 NPTF |
P-PDC-2-HK |
With bleeder ball check |
| 57 |
Female Thread |
3/4-14 NPTF |
P-PDC-2-HK |
| 585 |
Hose Stem |
5/16" |
P-PDC-2-HK |
| 585G |
Hose Stem |
5/16" |
P-PDC-2-HK |
With bleeder ball check |
| 59 |
Hose Stem |
3/8" |
P-PDC-2-HK |
| 59G |
Hose Stem |
3/8" |
P-PDC-2-HK |
With bleeder ball check |
| 60 |
Hose Stem |
1/2" |
P-PDC-2-HK |
| 60G |
Hose Stem |
1/2" |
P-PDC-2-HK |
With bleeder ball check |
| 61 |
Hose Stem |
3/4" |
P-PDC-2-HK |
| 61G |
Hose Stem |
3/4" |
P-PDC-2-HK |
With bleeder ball check |
| B-60 |
Hose Stem |
1/2" |
P-PDC-2-HK |
Brass |
| 5-PB1 |
Hose Clamp |
ID 1/4" OD 15/32" |
P-PDC-2-HK |
| 5-PB3 |
Hose Clamp |
ID 1/4" OD 1/2" |
P-PDC-2-HK |
| 5-PB5 |
Hose Clamp |
ID 1/4" OD 9/16" |
P-PDC-2-HK |
| 5-PB7 |
Hose Clamp |
ID 1/4" OD 5/8" |
P-PDC-2-HK |
| 5-PD5 |
Hose Clamp |
ID 3/8" OD 9/16" |
P-PDC-2-HK |
| 5-PD7 |
Hose Clamp |
ID 3/8" OD 5/8" |
P-PDC-2-HK |
| 5-PD9 |
Hose Clamp |
ID 3/8" OD 11/16" |
P-PDC-2-HK |
| 5-PD11 |
Hose Clamp |
ID 3/8" OD 3/4" |
P-PDC-2-HK |
| 5-PD13 |
Hose Clamp |
ID 3/8" OD 13/16" |
P-PDC-2-HK |
| 5-PD15 |
Hose Clamp |
ID 3/8" OD 7/8" |
P-PDC-2-HK |
| 5-PP13 |
Hose Clamp |
ID 1/2" OD 13/16" |
P-PDC-2-HK |
| 5-PP15 |
Hose Clamp |
ID 1/2" OD 7/8" |
P-PDC-2-HK |
| 5-PP17 |
Hose Clamp |
ID 1/2" OD 15/16" |
P-PDC-2-HK |
| 5-PP19 |
Hose Clamp |
ID 1/2" OD 1" |
P-PDC-2-HK |
| 5-PR23 |
Hose Clamp |
ID 3/4" OD 1 1/8" |
P-PDC-2-HK |
| 5-PR25 |
Hose Clamp |
ID 3/4" OD 1 3/16" |
P-PDC-2-HK |
| 5-PR27 |
Hose Clamp |
ID 3/4" OD 1 1/4" |
P-PDC-2-HK |
|
Series 6000 |
| 64A |
Male Thread |
1/2-14 NPTF |
P-PDC-3-HK |
| 64GA |
Male Thread |
1/2-14 NPTF |
P-PDC-3-HK |
With bleeder ball check |
| 66A |
Male Thread |
3/4-14 NPTF |
P-PDC-3-HK |
| 66GA |
Male Thread |
3/4-14 NPTF |
P-PDC-3-HK |
With bleeder ball check |
| 68A |
Male Thread |
1-11 1/2 NPTF |
P-PDC-3-HK |
| B-64A |
Male Thread |
1/2-14 NPTF |
P-PDC-3-HK |
Brass |
| B-66A |
Male Thread |
3/4-14 NPTF |
P-PDC-3-HK |
Brass |
| 65A |
Female Thread |
1/2-14 NPTF |
P-PDC-3-HK |
| 65GA |
Female Thread |
1/2-14 NPTF |
P-PDC-3-HK |
With bleeder ball check |
| 67A |
Female Thread |
3/4-14 NPTF |
P-PDC-3-HK |
| 67GA |
Female Thread |
3/4-14 NPTF |
P-PDC-3-HK |
With bleeder ball check |
| 69A |
Female Thread |
1-11 1/2 NPTF |
P-PDC-3-HK |
| 70A |
Hose Stem |
1/2" |
P-PDC-3-HK |
| 70GA |
Hose Stem |
1/2" |
P-PDC-3-HK |
With bleeder ball check |
| 71A |
Hose Stem |
3/4" |
P-PDC-3-HK |
| 71GA |
Hose Stem |
3/4" |
P-PDC-3-HK |
With bleeder ball check |
| 72A |
Hose Stem |
1" |
P-PDC-3-HK |
| B-71A |
Hose Stem |
3/4" |
P-PDC-3-HK |
Brass |
|
