Series ASL400-02
Air-Driven, High Pressure Liquid Pump

Autoclave Engineers ASL400-02 series pump is capable of pressures to 60,000 psi and offers flow rates up to 24 in3/min. Being air driven, the pump is explosion proof and safe for use in hazardous areas. Pumps are used for pumping oil, water or oil/water mixtures. All AE pumps are designed standard with stainless steel wetted parts, making them ideal for most applications. Contact Autoclave Engineers for any questions on optional materials or download product literature.

單作用雙活塞空氣驅動

技術參數(液體方面性能參數) :

介質:油，水或水/油混合物以及其他兼容的流體介質
最大出口壓力: 60,000 psi (4,137 bar)
氣液增壓比:1:796
隔離室（防止空氣部分被污染）：可選
排量/循環: 0.14 in3(2.3 cm3)
入口連接: 1/2" FNPT
出口連接: Autoclave F250C-1/4" Female High Pressure

技術參數(氣體方面性能參數) :

驅動空氣壓力范圍: 15-150 psi (1-10 bar)
額定工作壓力: 60,000 psi (4,137 bar)
驅動空氣壓力:75psi(5.2bar)
入口:1/2" FNPT
測試口: 1/8" FNPT(空氣不限)
排氣口(移去消聲器): 1/2" FNPT
最大耗氣量: 75psi時, 75SCFM
出廠時涂有密封潤滑油

ASL400-02 Series Pump:6” Single Acting, Double Piston High Pressure Liquid Pump

Features:

Standard, Air Operated Liquid High Pressure Pump
6” Single-Acting, Dual Piston Air Drive
Air to Pressure Ratio: 1:796
Stainless Steel Plunger Utilizing a Proprietary Multilayer Carbon Based Coating with Diamond-Like Carbon Exterior Layer - 3 times the Hardness of Stellite with a Coefficient of Friction Equal to/Less Than PTFE!
Air Drive Pressure Range: 15-150 psi (1-10 bar)
Volume Displacement per Stroke: .14 in3 (2.3 cm3)
Maximum Outlet Pressure: 60,000 psi (4137 bar)
Normal Air Pressure Required for Max. Output Pressure: 75 psi (5.2 bar)
Isolation (distance) chamber to protect air-drive section from high pressure seal leakage is standard.

Competitive Pump Comparisons