一区二区三区不卡在线观看,【乱子伦】国产精品www,国产人妖cd在线看网站,亚洲日日做天天做日日谢,色花堂国产精品首页第一页 ,国产欧美日韩在线不卡第一页,国产成人无码a区在线观看视频免费 ,FREECHINESE国产精品

       

       

         

      HHANSEN接頭,快速接頭產品/公司介紹

      一、單向關斷接頭
      【產品系列】
      1. 1000/400/500系列
      2. 3000/4000/5000/6000系列
      3. P-30/P-40系列
      4. AUTO-FLO 23/24系列
      5. 180/280系列
      6. 600/700系列
      7. 2RL/3RL系列
      8. SAFELINE系列
      9. 80系列
      10. 380系列
      11. G600系列
      12. 1900
      13. T1300系列
      二、雙向關斷接頭
      【產品系列】
      1、 HK系列(ISO7241-1A)
      2、 H15000系列(ISO7241-1B)
      3、 H5000系列
      4、 FF系列(ISO16028)
      5、 DB系列
      6、 W6000系列
      7、 96翼形系列
      8、 WA56000/HP3系列
      9、 UP10高壓系列
      10、 2HKIG/2HKIL系列
      三、直通式接頭
      【ST系列】
      ST系列是一種無閥門接頭,用于需要大流量及少壓降的領域。

      應用:ST系列提供的大流量被用于壓力清洗裝置、蒸汽清洗、液體運輸、模具冷卻線路及化工。
      主體尺寸:1/8”、1/4”、3/8”、1/2”、3/4”、1”、1-1/4”、1-1/2”、2”、2-1/2”
      材質:鋼、黃銅、不銹鋼、塑料
      螺紋連接形式:NPT、BSP、坡口連接
      工作壓力:
      鋼質接頭可承受:5,500psi(380bar)
      黃銅接頭可承受:5,200psi(360bar)
      不銹鋼接頭可承受:7,500psi(520bar)
      塑料接頭可承受:100psi(8bar)
      【產品系列】
      1、 ST系列
      2、 P2-ST/P3-ST系列
      3、 GH系列
      四、模具/注塑專用接
      球型鎖定、單向或雙向切斷接頭,采用平板設計。
      【FLO-TEMP 200/300/500系列】
      FLO-TEMP系列可以提供帶閥門或無閥門的接頭,在注模冷卻過程中提供流量。有各種各樣的軟管接頭可選擇:90度、135度的標準坡口連接

      QUICK COUPLING

      HANSEN COUPLINGS

      HANSEN COUPLINGS

       

      By focusing exclusively on couplings, Tuthill Coupling Group has achieved a competitive edge in providing the worlds best and most complete line of quick disconnect couplings. The quick connect/disconnect coupling was .rst developed and manufac-tured by Hansen Manufacturing Company, founded in 1915 by Fred Hansen. Since then, the Hansen coupling has become the industry standard for all quick connect/disconnect couplings.

      Tuthill Coupling Group designs, manufactures and distributes a broad range of couplings in brass, steel, stainless steel and plastic. These products are used to quickly connect and dis-connect a wide variety of .uids and gases, especially air and hydraulic oil.

      The bodies, sleeves and plugs are manufactured by Tuthill
      Coupling Group, then hardened and plated as required, and then assembled with other components such as stainless steel balls, seals and valves. Hansen Couplings are available in over 3,000 con.gurations, which are marketed to end users and original equipment manufacturers all over the world.

      Since Hansen was purchased by Tuthill Corporation in 1979, it has maintained a steady pattern of growth. Tuthill Coupling Group will continue to be a major factor in this market by offering a com-prehensive range of products, which are thoroughly researched, carefully designed, and precision manufactured. Our products are widely distributed through an increasingly strong network of worldwide distributors that are well versed in the engineered .uid power product needs of our customers.

      4

      HANSEN COUPLINGS

      PRODUCT ENGINEERING
      Many designs created as full spe-cials have now become the world standard. Tuthill Coupling Group has provided full service solutions, dedicated exclusively to quick dis-connect applications. Tuthill Cou-pling Groups engineers develop new products and modify designs of existing products using the latest Computer Aided Design programs.

      PRODUCT DESIGN &
      PROTOTYPE
      Tuthill Coupling Groups state of the art prototype development lab offers a unique environment for cycle testing, pressure testing and full model shop manufacturing. Quality controlled stan-dards insure complete success on new and standard product designs. Tuthill Coupling Group products maintain a constantly high level of quality and dependability through extensive product testing and evaluation.

      QUALITY CONTROL
      Tuthill Coupling Groups Quality Management System is registered to rigid ISO 9001:2000
      standards. The highest quality raw materials and components are machined and meticulously assembled. Care is taken to record and maintain speci.c tolerances in the day-to-day production of our products through constant monitoring and calibrating of our production equipment.

      CUSTOMER SERVICE
      Your highly trained inside sales representative is equipped to aid customers in product
      selection and to ensure your order is processed quickly, ef.ciently and accurately. Our
      customer ful.llment staff works closely with their corresponding outside sales individual to ensure consistent personalized assistance from the time an order is placed to the .nal as-sembly point of the product. Our distributors are strategically located throughout the world to provide prompt delivery of Hansen Couplings. Tuthill Coupling Groups goal is to provide our customers with the best service and technical support available.

      ISO 9001:2000

      Certi.cate No. 006888

      5

      HANSEN COUPLINGS

      Table of Contents

       

      ONE-WAY SHUT-OFF COUPLINGS 7-32
      Selection Chart for One-Way Couplings ...........................................8
      One-Way Plug Interchange Chart .....................................................9
      1000/400/500 ..................10-13
      3000/4000/5000/6000 .....14-18
      P-30/P-40 .........................19
      Auto-Flo 23 & 24 .............20-23
      Safeline ...........................23
      180/280 ...........................24
      100 ...................................25-26
      600/700 ...........................27-29
      2RL/3RL ..........................30-32
      TWO-WAY SHUT-OFF COUPLINGS33-52
      Selection Chart for Two-Way Couplings ............................................34
      HK ...................................35-39
      HA 15000 ........................40-41
      FF .....................................42-43
      96 ....................................44
      UP10 ...............................45
      WA 56000 .......................46
      2HKIG/2HKIL ..................47-48
      DB ...................................49
      WA 10000 .......................50-52
      STRAIGHT-THROUGH COUPLINGS 53-60
      Selection Chart for Straight-Through Couplings ...............................54
      ST ...................................55-57
      P2-ST/P3-ST ....................58
      GH ....................................58
      Flo-Temp .........................59-60
      GAS COUPLINGS 61-62
      Gas Mate ........................62
      ACCESSORIES / ELASTOMERS /
      ALPHANUMERIC PART INDEX / TECHNICAL INFORMATION 63-77
      Flow Sensor ....................64
      Check Valves ....................65
      Fittings .............................66-67
      Dust Caps & Plugs ...........68-69
      Flex-Air .............................70
      Elastomer Selection Guide ...............................................................71
      Alphanumeric Part Index ..72-76
      Technical & Warranty Information .....................................................79

       

       

       

      6

      HANSEN COUPLINGS

       

       

       

      ONE-WAY

      ONE-WAY

      7

      8

      HANSEN COUPLINGS

      HANSEN COUPLINGS

       

      ONE-WAY COUPLINGS

      7

      Contents and Selector Chart

       

      Coupling Style

      Body
      Material

      Locking Mechanism

      Interchange

      Body Size

      Options

      MANUAL CONNECT
      PUSH-TO-CONNECT
      SAFETY COUPLING
      INDUSTRIAL INTERCHANGE
      ARO 210
      TRU-FLATE
      CEJN 320/RECTUS 25
      HANSEN RL STYLE
      HANSEN UNIQUE DESIGN
      1/8 INCH
      1/4 INCH
      3/8 INCH
      1/2 INCH
      3/4 INCH
      ALUMINUM
      BRASS
      STEEL (Zinc/Chromate Finish)
      STAINLESS STEEL
      PLASTIC (Acetal)
      BALL LOCK
      PIN LOCK
      RING LOCK
      PLASTIC FINGERS
      SLEEVE LOCK
      SEAL MATERIALS (Various)
      DUST CAP (Vinyl)

      Coupling
      Series Page
      1000 11
      400 12
      500 13
      3000 15
      4000 16
      5000 17
      6000 18
      P-30 19
      P-40 19
      Auto-Flo 23 21
      Auto-Flo 24 21
      Safeline 23
      180/280 24
      100 25
      600/700 27
      2-RL 31
      3-RL 32


      Sleeve lock is automatic with RL couplings.

      ONE-WAY PLUG
      Interchange Chart

       

      The plug pro.les shown below are actual size. This chart can be used to help select Hansen one-way couplings. Industrial Interchange plugs of the appropriate size connect with the following Series sockets: 1000, 400, 500, 3000, 4000, 5000, 6000, Auto-Flo 23, P-30,
      P-40 and SVS. ARO 210 and Tru-Flate 1/4 plugs connect with Auto-Flo 23 sockets. Tru-Flate 3/8 plugs connect with Series 400 sockets. Auto-Flo 24 plugs interchange with CEJN 320 and Rectus 24. The bottom row of this chart shows unique Hansen plug designs.

      Industrial Interchange

      ARO 210

      Tru-Flate

      Auto-Flo 24

      Tru-Flate

      180/280

      100

      600

      700

      2RL

      3RL

      Series 1000/400/500
      Industrial Interchange

       

      Industrial Interchange Ball Lock Quick-Connect Couplings de-signed for compressed air, gases, and liquids. Body sizes are 1/4, 3/8 and 1/2.
      Features
      . Ball lock
      . Manual operation
      . Rugged, reliable
      . 1/4 and 1/2 sockets accept
      MIL-C-4109 plugs
      . Optional sleeve lock prevents accidental disconnection
      . Optional seal and valve materials
      available
      . Optional stainless steel socket
      (Series 1000 only)
      . Series 400 sockets accept Tru-Flate Interchange plugs and Industrial Interchange plugs
      Standard Materials
      . Socket
      - Brass Body
      - Nickel Plated Steel Sleeve
      - Zinc Plated Steel Valve
      - Buna-N (Nitrile) Seal
      - Stainless Steel Springs
      - Stainless Steel Locking Balls
      . Plug
      - Zinc Plated Case-Hardened
      Steel (All Sizes)
      - Brass (All Sizes)
      - Stainless Steel (Series 1000)
      Accessories
      . Dust caps and dust plugs
      (See page 68)

      Rated Pressure
      Series Size PSI BAR
      1000 1/4 2,000 138
      400 3/8 1,000 69
      500 1/2 500 35

      Flow Capacity
      Series . Ac
      1000 28
      400 45
      500 72

      NOTE: Series 400 operating
      pressure is 150 psi when connected
      to Tru-Flate Interchange plug.

      . Air .ow (scfm) with 5 psi
      pressure drop and 100 psig
      inlet pressure

      Series 1000 1/4 Nominal

      SOCKETS PLUGS

      Male End Connections

       

       

       

       

      Female End Connections

       

       

       

      Hose Stem End Connections

       

       

       

      Hose Clamp End Connections

       

       

       

       

      Part No. Thread Dimensions
      Steel Size C D HEX
      10 1/4-18 NPTF 1.75 0.65 0.56
      10C 1/4-18 NPTF 1.75 0.65 0.56
      10G. 1/4-18 NPTF 1.75 0.65 0.56
      12 1/8-27 NPTF 1.59 0.58 0.50
      12G. 1/8-27 NPTF 2.38 0.77 0.69
      14 3/8-18 NPTF 1.75 0.79 0.69
      14G. 3/8-18 NPTF 2.53 0.77 0.69
      10-43 7/16-20* 1.69 0.58 0.50
      Brass
      B-10 1/4-18NPTF 1.75 0.64 0.56
      Stainless
      LL-10 1/4-18 NPTF 1.75 0.65 0.56

      Part No. Thread Dimensions
      Brass Size A B HEX
      900 1/8-27 NPTF 2.07 1.00 0.69
      1100 1/4-18 NPTF 2.22 1.00 0.69 1300 3/8-18 NPTF 2.22 1.00 0.69 1000-43 7/16C20* 2.16 1.00 0.69 1000-63 5/8C18* 2.29 1.00 0.69
      Stainless
      LL-1100 1/4-18 NPTF 2.22 1.00 0.69

      Thread Dimensions
      Part No. Size A B HEX
      800 1/8-27 NPTF 1.91 1.00 0.69
      1000 1/4-18 NPTF 1.91 1.00 0.69 1200 3/8-18 NPTF 2.19 1.00 0.75
      Stainless
      LL-1000 1/4-18 NPTF 1.91 1.00 0.69

      Part No. Thread Dimensions
      Steel Size C D HEX
      11 1/4-18 NPTF 1.63 0.79 0.69
      11G. 1/4-18 NPTF 2.44 0.77 0.69
      13 1/8-27 NPTF 1.47 0.65 0.56
      15 3/8-18 NPTF 1.69 0.94 0.81
      Brass
      11B 1/4-18 NPTF 1.63 0.78 0.69
      Stainless
      LL-11 1/4-18 NPTF 1.63 0.79 0.69

      Dimensions
      Part No. Hose I.D. A B
      1600 1/4 2.66 1.00
      1600P. 1/4 2.44 1.00 1700 3/8 2.65 1.00 1700P. 3/8 2.54 1.00 1800 5/16 2.66 1.00

      Part No. Dimensions
      Steel Hose I.D. C D
      16 1/4 2.22 0.50
      16G. 1/4 2.97 0.77
      16P. 1/4 2.00 0.69
      16PG. . 1/4 2.75 0.77
      17 3/8 2.31 0.50
      17G. 3/8 2.96 0.77
      17P. 3/8 2.06 0.87
      17PG. . 3/8 2.85 0.87
      18 5/16 2.22 0.50
      Brass
      B-17 3/8 2.31 0.50

       

      Hose Dimensions
      Part No. I.D. O.D. A B HEX
      1-SA0 3/16 7/16 2.69 1.00 0.56 1-SA3 3/16 1/2 2.69 1.00 0.63
      1-SB1 1/4 15/32 2.75 1.00 0.63 1-SB3 1/4 1/2 2.75 1.00 0.63 1-SB5 1/4 9/16 2.75 1.00 0.69 1-SB7 1/4 5/8 2.75 1.00 0.75
      1-SC5 5/16 9/16 2.82 1.00 0.69 1-SC7 5/16 5/8 2.82 1.00 0.75 1-SC9 5/16 11/16 2.82 1.00 0.81 1-SD5 3/8 9/16 2.88 1.00 0.69 1-SD7 3/8 5/8 2.88 1.00 0.75 1-SD9 3/8 11/16 2.88 1.00 0.81 1-SD11 3/8 3/4 2.88 1.00 0.88

      Part No. Hose Dimensions
      Steel I.D. O.D. C D HEX
      3-PA0 3/16 7/16 2.25 0.63 0.56 3-PA3 3/16 1/2 2.25 0.70 0.63
      3-PB1 1/4 15/32 2.31 0.70 0.63 3-PB3 1/4 1/2 2.31 0.70 0.63 3-PB5 1/4 9/16 2.31 0.77 0.69 3-PB7 1/4 5/8 2.31 0.84 0.75
      3-PB9 1/4 11/16 2.31 0.91 0.81
      3-PB11 1/4 3/4 2.31 0.98 0.88
      3-PC5 5/16 9/16 2.38 0.77 0.69 3-PC7 5/16 5/8 2.38 0.84 0.75
      3-PC9 5/16 11/16 2.38 0.91 0.81 3-PD5 3/8 9/16 2.44 0.77 0.69 3-PD7 3/8 5/8 2.44 0.84 0.75 3-PD9 3/8 11/16 2.44 0.91 0.81
      3-PD11 3/8 3/4 2.44 1.98 0.88 3-PD13 3/8 13/16 2.44 1.05 0.94 3-PD15 3/8 7/8 2.44 1.12 1.00

      *45 Male Flare With Ball Check .With Bleeder Ball Check C Reduces hose whip when disconnecting. .For use with push-on style hose.

      Example: 1000 - BV - SL - 143

      How to build a socket part number with options:

      Seal Material:
      138 = Silicone
      143 = Viton
      192 = EPDM

      Standard Part Number
      from Socket Tables Above

      Notes: 1) Some part numbers may be subject to minimum order quantities.
      2) Options not shown may be available by special quotation.
      Consult your Hansen distributor.

      Valve Material:
      BV = Brass
      LLV = 303 Stainless Steel

      SL = Sleeve Lock

      Series 400 3/8 Nominal

      SOCKETS PLUGS

      Male End Connections

      Part No. Thread Dimensions
      Steel Size C D HEX
      38 1/8-27 NPTF 1.72 0.72 0.63
      40 1/4-18 NPTF 1.88 0.72 0.63 40G. 1/4-18 NPTF 2.65 0.77 0.69 42 3/8-18 NPTF 1.88 0.79 0.69 42G. 3/8-18 NPTF 2.65 0.77 0.69 44 1/2-14 NPTF 2.09 1.01 0.88
      Brass
      B-40 1/4-18 NPTF 1.88 0.70 0.63 B-42 3/8-18 NPTF 1.88 0.77 0.69

      Thread Dimensions
      Part No. Size A B HEX
      410-A 1/8-27 NPTF 2.20 1.13 0.88
      410 1/4-18 NPTF 2.35 1.13 0.88 430 3/8-18 NPTF 2.35 1.13 0.88 450 1/2-14 NPTF 2.54 1.13 0.88

      Part No. Thread Dimensions
      Steel Size C D HEX
      31AP-25M 1/4-18 NPTF 1.85 0.72 0.63
      31AP-37M 3/8-18 NPTF 1.85 0.79 0.69

      Female End Connections

      Part No. Thread Dimensions
      Steel Size C D HEX
      41 1/4-18 NPTF 1.63 0.79 0.69 41G. 1/4-18 NPTF 2.56 0.77 0.69 43 3/8-18 NPTF 1.81 0.94 0.81 43G. 3/8-18 NPTF 2.62 0.84 0.75 45 1/2-14 NPTF 2.06 1.15 1.00
      Brass
      B-43 3/8-18 NPTF 1.81 0.91 0.81

      Thread Dimensions
      Part No. Size A B HEX
      400-A 1/8-27 NPTF 2.10 1.13 0.88
      400 1/4-18 NPTF 2.10 1.13 0.88 420 3/8-18 NPTF 2.35 1.13 0.88 440 1/2-14 NPTF 2.62 1.13 1.00

      Part No. Thread Dimensions
      Steel Size C D HEX
      31AP-25F 1/4-18 NPTF 1.60 0.79 0.69
      31AP-37F 3/8-18 NPTF 1.78 0.94 0.81

      Hose Stem End Connections

      Dimensions
      Part No. Hose I.D. A B
      4004 1/4 2.82 1.13 4050 5/16 2.82 1.13 4006 3/8 2.82 1.13 4008 1/2 2.82 1.13

      Part No. Dimensions
      Steel Hose I.D. C D
      404 1/4 2.34 0.63 406 3/8 2.34 0.63 408 1/2 2.34 0.81
      Brass
      B-406 3/8 2.34 0.63

      Hose Clamp End Connections

      Hose Dimensions
      Part No. I.D. O.D. A B HEX
      40-SB3 1/4 1/2 2.92 1.13 0.63
      40-SB7 1/4 5/8 2.92 1.13 0.75
      40-SD7 3/8 5/8 3.04 1.13 0.75 40-SD9 3/8 11/16 3.04 1.13 0.81 40-SD11 3/8 3/4 3.04 1.13 0.88 40-SD13 3/8 13/16 3.04 1.13 0.94
      40-SP13 1/2 13/16 3.67 1.13 0.94 40-SP15 1/2 7/8 3.67 1.13 1.00 40-SP17 1/2 15/16 3.67 1.13 1.06 40-SP19 1/2 1 3.67 1.13 1.13

      Part No. Hose Dimensions
      Steel I.D. O.D. C D HEX

      4-PB1 1/4 15/32 2.44 0.70 0.63 4-PB3 1/4 1/2 2.44 0.70 0.63 4-PB5 1/4 9/16 2.44 0.77 0.69 4-PB7 1/4 5/8 2.44 0.84 0.75 4-PB9 1/4 11/16 2.44 0.91 0.81 4-PB11 1/4 3/4 2.44 0.98 0.88
      4-PD5 3/8 9/16 2.56 0.77 0.69 4-PD7 3/8 5/8 2.56 0.84 0.75 4-PD9 3/8 11/16 2.56 0.91 0.81 4-PD11 3/8 3/4 2.56 0.98 0.88 4-PD13 3/8 13/16 2.56 1.05 0.94 4-PD15 3/8 7/8 2.56 1.12 1.00
      4-PP13 1/2 13/16 3.25 1.05 0.94 4-PP15 1/2 7/8 3.25 1.12 1.00 4-PP17 1/2 15/16 3.25 1.19 1.06 4-PP19 1/2 1 3.25 1.26 1.13

      .With Bleeder Ball Check C Reduces hose whip when disconnecting.

      How to build a socket part number with options:

      Example: 400 - BV - SL - 143

      Seal Material:
      138 = Silicone
      143 = Viton
      192 = EPDM

      Standard Part Number
      from Socket Tables Above

      Notes: 1) Some part numbers may be subject to minimum order quantities.
      2) Options not shown may be available by special quotation.
      Consult your Hansen distributor.

      Valve Material:
      BV = Brass
      LLV = 303 Stainless Steel

      SL = Sleeve Lock

      All dimensions in inches.

      Series 500 1/2 Nominal

      SOCKETS PLUGS

      Male End Connections

      Thread Dimensions
      Part No. Size A B HEX
      501 1/4-18 NPTF 2.77 1.19 1.00 510 3/8-18 NPTF 2.78 1.19 1.00 530 1/2-14 NPTF 2.97 1.19 1.00 550 3/4-14 NPTF 2.97 1.19 1.06

      Part No. Thread Dimensions
      Steel Size C D HEX
      50 1/4-18 NPTF 2.25 0.79 0.69
      50G. 1/4-18 NPTF 2.90 0.98 0.88 52 3/8-18 NPTF 2.25 0.87 0.75 52G. 3/8-18 NPTF 2.90 0.98 0.88
      54 1/2-14 NPTF 2.44 1.01 0.88
      54G. 1/2-14 NPTF 3.09 0.98 0.88 56 3/4-14 NPTF 2.50 1.23 1.06
      56G. 3/4-14 NPTF 3.14 1.19 1.06
      Brass
      B-52 3/8-18 NPTF 2.25 0.70 0.63 B-54 1/2-14 NPTF 2.44 0.77 0.88

      Female End Connections

      Thread Dimensions
      Part No. Size A B HEX
      500-A 1/4-18 NPTF 2.72 1.19 1.00
      500 3/8-18 NPTF 2.78 1.19 1.00 520 1/2-14 NPTF 3.06 1.19 1.00 540 3/4-14 NPTF 3.09 1.19 1.19

      Part No. Thread Dimensions
      Steel Size C D HEX
      53-A 1/4-18 NPTF 1.92 0.79 0.69 53 3/8-18 NPTF 2.06 0.94 0.81 53G. 3/8-18 NPTF 2.90 0.98 0.88 55 1/2-14 NPTF 2.34 1.15 1.00 55G. 1/2-14 NPTF 3.17 0.98 0.88 57 3/4-14 NPTF 2.44 1.37 1.19

      Hose Stem End Connections

      Dimensions
      Part No. Hose I.D. A B
      570 3/8 3.32 1.19
      580 1/2 3.24 1.19 590 3/4 4.09 1.19

      Part No. Dimensions
      Steel Hose I.D. C D
      585 5/16 2.66 0.69 585G. 5/16 3.37 0.98 59 3/8 2.66 0.69 59G. 3/8 3.37 0.98 60 1/2 2.66 0.75 60G. 1/2 3.37 0.98 61 3/4 3.50 1.00 61G. 3/4 4.22 0.98
      Brass
      B-60 1/2 2.75 0.88

      Hose Clamp End Connections

      Part No. Hose Dimensions
      Steel I.D. O.D. C D HEX
      5-PB1 1/4 15/32 2.81 0.70 0.63 5-PB3 1/4 1/2 2.81 0.70 0.63 5-PB5 1/4 9/16 2.81 0.77 0.69 5-PB7 1/4 5/8 2.81 0.84 0.75 5-PD5 3/8 9/16 2.94 0.77 0.69 5-PD7 3/8 5/8 2.94 0.84 0.75 5-PD9 3/8 11/16 2.94 0.91 0.81 5-PD11 3/8 3/4 2.94 0.98 0.88 5-PD13 3/8 13/16 2.94 1.05 0.94 5-PD15 3/8 7/8 2.94 1.12 1.00
      5-PP13 1/2 13/16 3.62 1.05 0.94 5-PP15 1/2 7/8 3.62 1.12 1.00 5-PP17 1/2 15/16 3.62 1.19 1.06 5-PP19 1/2 1 3.62 1.26 1.13
      5-PR23 3/4 11/8 3.75 1.40 1.25
      5-PR25 3/4 13/16 3.75 1.47 1.31
      5-PR27 3/4 11/4 3.75 1.54 1.38

      Hose Dimensions
      Part No. I.D. O.D. A B HEX
      50-SD7 3/8 5/8 3.49 1.19 0.75 50-SD13 3/8 13/16 3.49 1.19 0.94
      50-SP13 1/2 13/16 4.09 1.19 0.94 50-SP15 1/2 7/8 4.09 1.19 1.00 50-SP17 1/2 15/16 4.09 1.19 1.06 50-SP19 1/2 1 4.09 1.19 1.13
      50-SR23 3/4 11/8 4.22 1.19 1.25 50-SR25 3/4 13/16 4.22 1.19 1.31 50-SR27 3/4 11/4 4.22 1.19 1.38

      .With Bleeder Ball Check C Reduces hose whip when disconnecting.

      How to build a socket part number with options:

      Example: 500 - SL - 143

      Seal Material:
      143 = Viton
      192 = EPDM

      Standard Part Number
      from Socket Tables Above

      Notes: 1) Some part numbers may be subject to minimum order quantities.
      2) Options not shown may be available by special quotation.
      Consult your Hansen distributor.

      SL = Sleeve Lock

      3000/4000/5000/6000
      Industrial Interchange

       

      Industrial Interchange Pin Lock Couplings designed for com-pressed air, gases, and liquids. Body sizes are 1/4, 3/8, 1/2 and 3/4.
      Features
      . The orginal automatic one-way shutoff coupling designed by HansenThe Industry Standard
      . Rugged, reliable
      . Easy, automatic, push-to-connect design provides instantaneous connection and disconnection of lines, plus automatic shut-off of socket end of line
      . 1/4 and 1/2 sockets accept
      MIL-C-4109 plug
      . Optional sleeve lock prevents
      accidental disconnection
      . Optional seal and valve materials
      available
      Standard Materials
      . Socket
      - Brass Body
      - Zinc Plated Steel Valve
      - Buna-N (Nitrile) Seal
      - Stainless Steel Springs
      - Stainless Steel Locking Pins
      . Plug
      - Zinc Plated Case-Hardened Steel (All Sizes)
      - Brass (All Sizes)
      - Stainless Steel (Series 3000)
      Accessories
      . Dust caps and dust plugs
      (See page 68)

      Rated Pressure
      Series Size PSI BAR
      3000 1/4 2,000 138
      4000 3/8 1,000 69
      5000 1/2 500 35
      6000 3/4 220 15

      Flow Capacity
      Series . Ac
      3000 28
      4000 45
      5000 72
      6000 125

      . Air .ow (scfm) with 5 psi pressure drop and 100 psig inlet pressure

      Series 3000 1/4 Nominal

      SOCKETS PLUGS

      Male End Connections

      Part No. Thread Dimensions

      Steel Size C D HEX

      10 1/4-18 NPTF 1.75 0.65 0.56
      10C 1/4-18 NPTF 1.75 0.65 0.56
      10G. 1/4-18 NPTF 1.75 0.65 0.56
      12 1/8-27 NPTF 1.59 0.58 0.50
      12G. 1/8-27 NPTF 2.38 0.77 0.69
      14 3/8-18 NPTF 1.75 0.79 0.69
      14G. 3/8-18 NPTF 2.53 0.77 0.69
      Brass
      B-10 1/4-18 NPTF 1.75 0.64 0.56
      Stainless
      LL-10 1/4-18 NPTF 1.75 0.65 0.56

      Part No. Thread Dimensions
      Brass Size A B HEX
      2900 1/8-27 NPTF 2.11 1.19 0.69
      3100 1/4-18 NPTF 2.26 1.19 0.69
      3300 3/8-18 NPTF 2.26 1.19 0.69
      3000-43 7/16C20* 2.20 1.19 0.69
      3000-63 5/8C18* 2.33 1.19 0.69

      Female End Connections

      Part No. Thread Dimensions
      Brass Size A B HEX
      2800 1/8-27 NPTF 1.95 1.19 0.69
      3000 1/4-18 NPTF 2.17 1.19 0.69
      3200 3/8-18 NPTF 2.23 1.19 0.75

      Part No. Thread Dimensions
      Steel Size C D HEX
      11 1/4-18 NPTF 1.63 0.79 0.69
      11G. 1/4-18 NPTF 2.44 0.77 0.69
      13 1/8-27 NPTF 1.47 0.65 0.56
      15 3/8-18 NPTF 1.69 0.94 0.81
      Brass
      11B 1/4-18 NPTF 1.63 0.78 0.69
      Stainless
      LL-11 1/4-18 NPTF 1.63 0.79 0.69

      Hose Stem End Connections

      Part No. Dimensions

      Brass Hose I.D. A B

      3600 1/4 2.70 1.19
      3600P. 1/4 2.48 1.19
      3700 3/8 2.69 1.19
      3700P. 3/8 2.58 1.19
      3800 5/16 2.70 1.19

      Part No. Dimensions
      Steel Hose I.D. C D
      16 1/4 2.22 0.50
      16G. 1/4 2.97 0.77
      16P. 1/4 2.00 0.69
      16PG. 1/4 2.75 0.77
      17 3/8 2.31 0.50
      17G. 3/8 2.96 0.77
      17P. 3/8 2.06 0.87
      17PG. . 3/8 2.85 0.87
      18 5/16 2.22 0.50
      Brass
      B-17 3/8 2.31 0.50

       

      Hose Clamp End Connections

      Part No. Hose Dimensions

      Brass I.D. O.D. A B HEX

      3-SA0 3/16 7/16 2.73 1.19 0.56
      3-SA3 3/16 1/2 2.73 1.19 0.63
      3-SB1 1/4 15/32 2.79 1.19 0.63
      3-SB3 1/4 1/2 2.79 1.19 0.63
      3-SB5 1/4 9/16 2.79 1.19 0.69
      3-SB7 1/4 5/8 2.79 1.19 0.75
      3-SB9 1/4 11/16 2.79 1.19 0.81
      3-SB11 1/4 3/4 2.79 1.19 0.88
      3-SC5 5/16 9/16 2.86 1.19 0.69
      3-SC7 5/16 5/8 2.86 1.19 0.75
      3-SC9 5/16 11/16 2.86 1.19 0.81
      3-SD5 3/8 9/16 2.92 1.19 0.69
      3-SD7 3/8 5/8 2.92 1.19 0.75
      3-SD9 3/8 11/16 2.92 1.19 0.81
      3-SD11 3/8 3/4 2.92 1.19 0.88
      3-SD13 3/8 13/16 2.92 1.19 0.94

      Part No. Hose Dimensions
      Steel I.D. O.D. C D HEX
      3-PA0 3/16 7/16 2.25 0.63 0.56
      3-PA3 3/16 1/2 2.25 0.70 0.63
      3-PB1 1/4 15/32 2.31 0.70 0.63
      3-PB3 1/4 1/2 2.31 0.70 0.63
      3-PB5 1/4 9/16 2.31 0.77 0.69
      3-PB7 1/4 5/8 2.31 0.84 0.75
      3-PB9 1/4 11/16 2.31 0.91 0.81
      3-PB11 1/4 3/4 2.31 0.98 0.88
      3-PC5 5/16 9/16 2.38 0.77 0.69
      3-PC7 5/16 5/8 2.38 0.84 0.75
      3-PC9 5/16 11/16 2.38 0.91 0.81
      3-PD5 3/8 9/16 2.44 0.77 0.69
      3-PD7 3/8 5/8 2.44 0.84 0.75
      3-PD9 3/8 11/16 2.44 0.91 0.81
      3-PD11 3/8 3/4 2.44 0.98 0.88
      3-PD13 3/8 13/16 2.44 1.05 0.94
      3-PD15 3/8 7/8 2.44 1.12 1.00

      *45 Male Flare With Ball Check .With Bleeder Ball Check C Reduces hose whip when disconnecting. .For use with push-on style hose.

      How to build a socket part number with options:

      Example: 3000 - BV - SL - 143

      Seal Material:
      138 = Silicone
      143 = Viton
      192 = EPDM

      Standard Part Number
      from Socket Tables Above

      Notes: 1) Some part numbers may be subject to minimum order quantities.
      2) Options not shown may be available by special quotation.
      Consult your Hansen distributor.

      Valve Material:
      BV = Brass
      LLV = 303 Stainless Steel

      SL = Sleeve Lock

      Series 4000 3/8 Nominal

      SOCKETS PLUGS

      Male End Connections

      Part No. Thread Dimensions

      Brass Size A B HEX

      4100-A 1/8-27 NPTF 2.20 1.38 0.88
      4100 1/4-18 NPTF 2.35 1.38 0.88
      4300 3/8-18 NPTF 2.35 1.38 0.88
      4500 1/2-14 NPTF 2.54 1.38 0.88

      Part No. Thread Dimensions
      Steel Size C D HEX
      38 1/8-27 NPTF 1.72 0.72 0.63
      40 1/4-18 NPTF 1.88 0.72 0.63
      40G. 1/4-18 NPTF 2.65 0.77 0.69
      42 3/8-18 NPTF 1.88 0.79 0.69
      42G. 3/8-18 NPTF 2.65 0.77 0.69
      44 1/2-14 NPTF 2.09 1.01 0.88
      Brass
      B-40 1/4-18 NPTF 1.88 0.70 0.63
      B-42 3/8-18 NPTF 1.88 0.77 0.69

      Female End Connections

      Part No. Thread Dimensions
      Steel Size C D HEX
      41 1/4-18 NPTF 1.63 0.79 0.69
      41G. 1/4-18 NPTF 2.56 0.77 0.69
      43 3/8-18 NPTF 1.81 0.94 0.81
      43G. 3/8-18 NPTF 2.62 0.84 0.75
      45 1/2-14 NPTF 2.06 1.15 1.00
      Brass
      B-43 3/8-18 NPTF 1.81 0.91 0.81

      Part No. Thread Dimensions
      Brass Size A B HEX
      4000-A 1/8-27 NPTF 2.10 1.38 0.88
      4000 1/4-18 NPTF 2.10 1.38 0.88
      4200 3/8-18 NPTF 2.35 1.38 0.88
      4400 1/2-14 NPTF 2.62 1.38 1.00

      Hose Stem End Connections

      Part No. Dimensions

      Steel Hose I.D. C D

      404 1/4 2.34 0.63
      406 3/8 2.34 0.63
      408 1/2 2.34 0.81
      Brass
      B-406 3/8 2.34 0.63

      Part No. Hose Dimensions
      Brass I.D. A B
      40400 1/4 2.82 1.38
      40500 5/16 2.82 1.38
      40600 3/8 2.82 1.38
      40800 1/2 2.92 1.38

       

      Hose Clamp End Connections

      Part No. Hose Dimensions
      Steel I.D. O.D. C D HEX
      4-PB1 1/4 15/32 2.44 0.70 0.63
      4-PB3 1/4 1/2 2.44 0.70 0.63
      4-PB5 1/4 9/16 2.44 0.77 0.69
      4-PB7 1/4 5/8 2.44 0.84 0.75
      4-PB9 1/4 11/16 2.44 0.91 0.81
      4-PB11 1/4 3/4 2.44 0.98 0.88
      4-PD5 3/8 9/16 2.56 0.77 0.69
      4-PD7 3/8 5/8 2.56 0.84 0.75
      4-PD9 3/8 11/16 2.56 0.91 0.81
      4-PD11 3/8 3/4 2.56 0.98 0.88
      4-PD13 3/8 13/16 2.56 1.05 0.94
      4-PD15 3/8 7/8 2.56 1.12 1.00
      4-PP13 1/2 13/16 3.25 1.05 0.94
      4-PP15 1/2 7/8 3.25 1.12 1.00
      4-PP17 1/2 15/16 3.25 1.19 1.06
      4-PP19 1/2 1 3.25 1.26 1.13

      Part No. Hose Dimensions
      Brass I.D. O.D. A B HEX
      4-SB3 1/4 1/2 2.92 1.38 0.63
      4-SB5 1/4 9/16 2.92 1.38 0.69
      4-SB7 1/4 5/8 2.92 1.38 0.75
      4-SB9 1/4 11/16 2.92 1.38 0.81
      4-SB11 1/4 3/4 2.92 1.38 0.88
      4-SC7 5/16 5/8 2.98 1.38 0.75
      4-SD5 3/8 9/16 3.04 1.38 0.69
      4-SD7 3/8 5/8 3.04 1.38 0.75
      4-SD9 3/8 11/16 3.04 1.38 0.81
      4-SD11 3/8 3/4 3.04 1.38 0.88
      4-SD15 3/8 7/8 3.04 1.38 1.00
      4-SP13 1/2 13/16 3.67 1.38 0.94
      4-SP15 1/2 7/8 3.67 1.38 1.00
      4-SP17 1/2 15/16 3.67 1.38 1.06
      4-SP19 1/2 1 3.67 1.38 1.13

      .With Bleeder Ball Check C Reduces hose whip when disconnecting.

      How to build a socket part number with options:

      Example: 4000 - BV - SL - 143

      Seal Material:
      138 = Silicone
      143 = Viton
      192 = EPDM

      Standard Part Number
      from Socket Tables Above

      Notes: 1) Some part numbers may be subject to minimum order quantities.
      2) Options not shown may be available by special quotation.
      Consult your Hansen distributor.

      Valve Material:
      BV = Brass
      LLV = 303 Stainless Steel

      SL = Sleeve Lock

      All dimensions in inches.

      Series 5000 1/2 Nominal

      SOCKETS PLUGS

      Male End Connections

      Part No. Thread Dimensions
      Brass Size A B HEX
      50100 1/4-18 NPTF 2.78 1.50 1.00
      5100 3/8-18 NPTF 2.79 1.50 1.00
      5300 1/2-14 NPTF 2.98 1.50 1.00
      5500 3/4-14 NPTF 2.98 1.50 1.06

      Part No. Thread Dimensions
      Steel Size C D HEX
      50 1/4-18 NPTF 2.25 0.79 0.69
      50G. 1/4-18 NPTF 2.90 0.98 0.88
      52 3/8-18 NPTF 2.25 0.87 0.75
      52G. 3/8-18 NPTF 2.90 0.98 0.88
      54 1/2-14 NPTF 2.44 1.01 0.88
      54G. 1/2-14 NPTF 3.09 0.98 0.88
      56 3/4-14 NPTF 2.50 1.23 1.06
      56G. 3/4-14 NPTF 3.14 1.19 1.06
      Brass
      B-52 3/8-18 NPTF 2.25 0.70 0.63
      B-54 1/2-14 NPTF 2.44 0.77 0.69

      Female End Connections

      Part No. Thread Dimensions
      Brass Size A B HEX
      5000-A 1/4-18 NPTF 2.72 1.50 1.00
      5000 3/8-18 NPTF 2.79 1.50 1.00
      5200 1/2-14 NPTF 3.07 1.50 1.00
      5400 3/4-14 NPTF 3.10 1.50 1.19

      Part No. Thread Dimensions
      Steel Size C D HEX
      53-A 1/4-18 NPTF 1.92 0.79 0.69
      53 3/8-18 NPTF 2.06 0.94 0.81
      53G. 3/8-18 NPTF 2.90 0.98 0.88
      55 1/2-14 NPTF 2.34 1.15 1.00
      55G. 1/2-14 NPTF 3.17 0.98 0.88
      57 3/4-14 NPTF 2.44 1.37 1.19

      Hose Stem End Connections

      Part No. Dimensions
      Brass Hose I.D. A B
      50400 1/4 3.26 1.50
      50500 5/16 3.29 1.50
      5700 3/8 3.33 1.50
      5800 1/2 3.25 1.50
      5900 3/4 4.10 1.50

      Part No. Dimensions
      Steel Hose I.D. C D
      585 5/16 2.66 0.69
      585G. 5/16 3.37 0.98
      59 3/8 2.66 0.69
      59G. 3/8 3.37 0.98
      60 1/2 2.66 0.75
      60G. 1/2 3.37 0.98
      61 3/4 3.50 1.00
      61G. 3/4 4.22 0.98
      Brass
      B-60 1/2 2.75 0.88

       

      Hose Clamp End Connections

      Part No. Hose Dimensions
      Brass I.D. O.D. A B HEX
      5-SD5 3/8 9/16 3.50 1.50 0.69
      5-SD7 3/8 5/8 3.50 1.50 0.75
      5-SD9 3/8 11/16 3.50 1.50 0.81
      5-SD11 3/8 3/4 3.50 1.50 0.88
      5-SD13 3/8 13/16 3.50 1.50 0.94
      5-SD15 3/8 7/8 3.50 1.50 1.00
      5-SP13 1/2 13/16 4.10 1.50 0.94
      5-SP15 1/2 7/8 4.10 1.50 1.00
      5-SP17 1/2 15/16 4.10 1.50 1.06
      5-SP19 1/2 1 4.10 1.50 1.13
      5-SR23 3/4 11/8 4.23 1.50 1.25
      5-SR25 3/4 13/16 4.23 1.50 1.31
      5-SR27 3/4 11/4 4.23 1.50 1.38

      Part No. Hose Dimensions
      Steel I.D. O.D. C D HEX
      5-PB1 1/4 15/32 2.81 0.70 0.63
      5-PB3 1/4 1/2 2.81 0.70 0.63
      5-PB5 1/4 9/16 2.81 0.77 0.69
      5-PB7 1/4 5/8 2.81 0.84 0.75
      5-PD5 3/8 9/16 2.94 0.77 0.69
      5-PD7 3/8 5/8 2.94 0.84 0.75
      5-PD9 3/8 11/16 2.94 0.91 0.81
      5-PD11 3/8 3/4 2.94 0.98 0.88
      5-PD13 3/8 13/16 2.94 1.05 0.94
      5-PD15 3/8 7/8 2.94 1.12 1.00
      5-PP13 1/2 13/16 3.62 1.05 0.94
      5-PP15 1/2 7/8 3.62 1.12 1.00
      5-PP17 1/2 15/16 3.62 1.19 1.06
      5-PP19 1/2 1 3.62 1.26 1.13
      5-PR23 3/4 11/8 3.75 1.40 1.25
      5-PR25 3/4 13/16 3.75 1.47 1.31
      5-PR27 3/4 11/4 3.75 1.54 1.38

      .With Bleeder Ball Check C Reduces hose whip when disconnecting.

      How to build a socket part number with options:

      Example: 5000 - BV - SL - 143

      Seal Material:
      143 = Viton
      192 = EPDM

      Standard Part Number
      from Socket Tables Above

      Notes: 1) Some part numbers may be subject to minimum order quantities.
      2) Options not shown may be available by special quotation.
      Consult your Hansen distributor.

      Valve Material:
      BV = Brass
      LLV = 303 Stainless Steel

      SL = Sleeve Lock

      Series 6000 3/4 Nominal

      SOCKETS PLUGS

      Male End Connections

      Part No. Thread Dimensions
      Brass Size A B HEX
      6300 1/2-14 NPTF 2.94 1.88 1.31
      6500 3/4-14 NPTF 2.94 1.88 1.31
      6700 1-111/2 NPTF 3.13 1.88 1.31

      Part No. Thread Dimensions
      Steel Size C D HEX
      64A 1/2-14 NPTF 2.31 1.15 1.00
      64GA. 1/2-14 NPTF 3.26 1.12 1.00
      66A 3/4-14 NPTF 2.38 1.23 1.06
      66GA. 3/4-14 NPTF 3.26 1.19 1.06
      68A 1-111/2 NPTF 2.56 1.52 1.31

      Brass
      B-64A 1/2-14 NPTF 2.31 1.12 1.00
      B-66A 3/4-14 NPTF 2.38 1.19 1.06

      Female End Connections

      Part No. Thread Dimensions
      Steel Size C D HEX
      65A 1/2-14 NPTF 2.22 1.15 1.00
      65GA. 1/2-14 NPTF 3.35 1.12 1.00
      67A 3/4-14 NPTF 2.22 1.37 1.19
      67GA. 3/4-14 NPTF 3.38 1.33 1.19
      69A 1-111/2 NPTF 2.41 1.80 1.56

       

      Part No. Thread Dimensions
      Brass Size A B HEX
      6200 1/2-14 NPTF 2.85 1.88 1.31
      6400 3/4-14 NPTF 3.00 1.88 1.31
      6600 1-111/2 NPTF 3.19 1.88 1.56

       

      Hose Stem End Connections

       

      Part No. Hose Dimensions
      Brass I.D. A B
      6800 1/2 3.21 1.88
      6900 3/4 4.06 1.88
      7000 1 4.07 1.88

      Part No. Dimensions
      Steel Hose I.D. C D
      70A 1/2 2.53 0.94
      70GA. 1/2 3.53 1.12
      71A 3/4 3.44 1.06
      71GA. 3/4 4.38 1.12
      72A 1 3.44 1.31
      Brass
      B-71A 3/4 3.44 1.06

      .With Bleeder Ball Check C Reduces hose whip when disconnecting.

      How to build a socket part number with options:

      Example: 6000 - BV - SL - 143

      Standard Part Number
      from Socket Tables Above

      Seal Material:
      143 = Viton

       

      Notes: 1) Some part numbers may be subject to minimum order quantities.
      2) Options not shown may be available by special quotation.
      Consult your Hansen distributor.

      Valve Material:
      BV = Brass

      SL = Sleeve Lock

      All dimensions in inches.

      Series P-30 & P-40
      Industrial Interchange

       

      Industrial Interchange Plastic Quick Connect Couplings designed for compressed air. Body sizes are 1/4 and 3/8.
      Features
      . Plastic socket body and plug
      . Light-weight
      . Less likely to damage painted or easily dented surfaces than
      metal couplings
      . Easy, automatic, push-to-connect design provides instantaneous connection and disconnection of lines, plus automatic shut-off of socket end of line
      . 1/4 socket accepts MIL-C-4109 plugs
      Standard Materials
      . Socket
      - Acetal Body
      - Polypropylene Sleeve
      - Zinc Plated Steel Valve
      - Buna-N (Nitrile) Seal
      - Stainless Steel Springs
      . Plug
      - Acetal
      - Series P-30 accepts all
      Series 3000 plugs
      - Series P-40 accepts all Series 4000 plugs

      Flow Capacity
      Series . Ac
      P-30 28
      P-40 45

      Rated Pressure
      Series Size PSI BAR
      P-30 1/4 150 10
      P-40 3/8 150 10

      * At temperatures up to 125

      . Air .ow (scfm) with 5 psi pressure drop and 100 psig inlet pressure

       

      Sockets Plugs

      Male End Connections

      Hose Stem End Connections

      Dimensions
      Part No. Hose I.D. A B

      P4-30S-25H 1/4 2.66 1.25 P7-40S-37H 3/8 2.82 1.44

      Thread Dimensions
      Part No. Size C D HEX

      P4-30P-25M 1/4-18 NPTF 1.75 0.65 0.56
      P7-40P-37M 3/8-18 NPTF 1.88 0.79 0.69

      Series AUTO-FLO 23 & 24
      1/4 Nominal

       

      ARO 210 Interchange Plug

      Auto-Flo 24 Socket

      Industrial Interchange Plug

      Auto-Flo 23 Socket

      Auto-Flo 24 Plug

      Tru-Flate Interchange Plug

      High .ow, automatic Quick-Connect Couplings designed for use with compressed air.

      See page 9 for One-Way Plug
      Interchange Chart.
      Features
      . Auto-Flo 23 is the .rst automatic universal coupling designed to operate with Industrial, ARO 210 and Tru-Flate Interchange plugs
      . Auto-Flo 24 operates with CEJN 320 and Rectus 25 Interchange plugs
      . Easy, automatic, push-to-connect
      design provides instantaneous connection and disconnection of lines, plus automatic shut-off of socket end of line
      . Sleeve guard protects against accidental disconnection

      Standard Materials
      . Socket
      - Brass Body
      - Brass Valve
      - Zinc Plated Steel Sleeve
      - Buna-N (Nitrile) Seals
      - Stainless Steel Springs
      - Stainless Steel Locking Balls
      . Plug
      - Industrial Interchange (Series 3000) . Zinc Plated Case-Hardened Steel
      . Brass
      . Stainless Steel
      - ARO 210, Tru-Flate and CEJN/Rectus Interchanges
      . Zinc Plated Case-Hardened Steel

      Pressure Ratings
      Series PSI BAR
      Auto-Flo 23 150 10
      Auto-Flo 24 150 10

      Flow Capacities
      Plug Interchange . Ac
      Industrial 32
      ARO 210 32
      Tru-Flate 30
      Auto-Flo 24 45

      . Air .ow (scfm) with 5 psi pressure drop
      and 100 psig inlet pressure

       

      Series AUTO-FLO 23 & 24
      1/4 Nominal

      SOCKETS Auto-Flo 23 PLUGS

      Male End Connections

      Thread Dimensions
      Part No. Size A B HEX
      B23AS-25M 1/4-18 NPTF 2.23 0.94 0.81 B23AS-25MBST 1/4-19 BSPT 2.23 0.94 0.81 B23AS-37M 3/8-18 NPTF 2.23 0.94 0.81
      B23AS-37MBST 3/8-19 BSPT 2.23 0.94 0.81
      B23AS-50MBST 1/2-14 BSPT 2.23 0.94 0.88

      Part No. Thread Dimensions
      Steel Size C D HEX

      INDUSTRIAL INTERCHANGE (Series 3000, page 15)

      2607 1/8-27 NPTF 1.42 0.58 0.50 2608 1/4-18 NPTF 1.68 0.65 0.56 2608B 1/4-19 BSPT 1.68 0.65 0.56
      20AP-37M 3/8-18 NPTF 1.68 0.79 0.69 ARO 210 INTERCHANGE

      21AP-25M 1/4-18 NPTF 1.65 0.65 0.56
      21AP-37M 3/8-18 NPTF 1.65 0.79 0.69
      Tru-Flate INTERCHANGE

      Female End Connections

      Part No. Thread Dimensions
      Steel Size C D HEX

      INDUSTRIAL INTERCHANGE (Series 3000, page 15)

      2609 1/4-18 NPTF 1.55 0.79 0.69 2609B 1/4-19 BSPP 1.55 0.79 0.69
      20AP-37F 3/8-18 NPTF 1.61 0.94 0.81
      ARO 210 INTERCHANGE

      21AP-25F 1/4-18 NPTF 1.53 0.79 0.69
      21AP-37F 3/8-18 NPTF 1.59 0.94 0.81
      Tru-Flate INTERCHANGE

      Thread Dimensions
      Part No. Size A B HEX
      B23AS-25F 1/4-18 NPTF 2.02 0.94 0.81 B23AS-25FBS 1/4-19 BSPP 2.02 0.94 0.81 B23AS-37F 3/8-18 NPTF 2.02 0.94 0.81 B23AS-37FBS 3/8-19 BSPP 2.02 0.94 0.81
      B23AS-50FBS 3/8-14 BSPP 2.34 0.94 1.06

      Hose Stem End Connections

      Part No. Dimensions
      Steel Hose I.D. C D

      INDUSTRIAL INTERCHANGE (Series 3000, page 15)

      3946 1/4 2.14 0.50
      3947 5/16 2.14 0.50
      22238 3/8 2.14 0.50
      ARO 210 INTERCHANGE

      21AP-25H 1/4 2.12 0.50
      21AP-37H 3/8 2.12 0.50
      Tru-Flate INTERCHANGE

      Dimensions
      Part No. Hose I.D. A B
      B23AS-25H 1/4 2.76 0.94 B23AS-31H 5/16 2.73 0.94 B23AS-37H 3/8 2.73 0.94
      B23AS-50H 1/2 2.70 0.94

       

      Series AUTO-FLO 23 & 24
      1/4 Nominal

      SOCKETS Auto-Flo 24 PLUGS

      Male End Connections

      Part No. Thread Dimensions
      Steel Size C D HEX
      24AP-25MG 1/4-18 NPTF 1.64 0.65 0.56 24AP-25MBST 1/4-19 BSPT 1.62 0.65 0.56
      24AP-37MBST 3/8-19 BSPT 1.62 0.79 0.69 24AP-50MBST 1/2-14 BSPT 1.88 1.01 0.88

      Part No. Thread Dimensions
      Brass Size A B HEX
      B24AS-25M 1/4-18 NPTF 2.27 0.94 0.81 B24AS-25MBST 1/4-19 BSPT 2.27 0.94 0.81
      B24AS-37MBST 3/8-19 BSPT 2.27 0.94 0.81
      B24AS-50MBST 1/2-14 BSPT 2.27 0.94 0.88

       

      Female End Connections

      Part No. Thread Dimensions
      Steel Size C D HEX
      24AP-25FG 1/4-18 NPTF 1.49 0.79 0.69 24AP-25FBS 1/4-19 BSPP 1.46 0.79 0.69
      24AP-37FBS 3/8-19 BSPP 1.52 0.94 0.81 24AP-50FBS 1/2-14 BSPP 1.65 1.23 1.06

      Part No. Thread Dimensions
      Brass Size A B HEX
      B24AS-25F 1/4-18 NPTF 2.06 0.94 0.81 B24AS-25FBS 1/4-19 BSPP 2.06 0.94 0.81
      B24AS-37FBS 3/8-19 BSPP 2.06 0.94 0.81
      B24AS-50FBS 1/2-14 BSPP 2.38 0.94 1.06

      Hose Stem End Connections

      Part No. Dimensions
      Brass Hose I.D. A B
      B24AS-25H 1/4 2.80 0.94 B24AS-31H 5/16 2.77 0.94
      B24AS-37H 3/8 2.77 0.94
      B24AS-50H 1/2 2.74 0.94

      Part No. Dimensions
      Steel Hose I.D. C D
      24AP-25H 1/4 2.08 0.50 24AP-31H 5/16 2.08 0.50
      24AP-37H 3/8 2.08 0.50 24AP-50H 1/2 2.08 0.63

      Series SAFELINE
      1/4 Industrial Interchange

       

      Male End Connections

      The SAFELINE Industrial Interchange pushbutton safety coupling is designed for use with compressed air.
      Features
      . Safe and easy to connect and disconnect. Two-step disconnect procedure shuts off air supply and releases downstream air pressure before plug can be removed from socket. Hose whip is prevented.
      . Light weight, compact ergonomic design
      . Accepts 1/4 MIL-C-4109 plugs
      Operation
      . To connect: Push plug into socket
      . To disconnect: (1) Push button on side of socket. Air supply is shut off and plug pops out 3/16 inch, but is not released from socket. Downstream air is vented. (2) Push plug into socket to release latch. Pull plug from socket.
      Standard Materials
      . Socket
      - Aluminum and steel construction
      - Buna-N (Nitrile) Seals
      . Plug: Use Series 3000 Plugs

      Thread Dimensions
      Part No. Thread Size A B HEX
      GD 10536 41 1/4-18 NPTF 3.18 1.02 0.67
      GD 10536 83 3/8-18 NPTF 3.18 1.02 0.75

      Female End Connections

      Thread Dimensions
      Part No. Thread Size A B HEX
      GD 10526 41 1/4-18 NPTF 2.97 1.02 0.67
      GD 10526 83 3/8-18 NPTF 3.18 1.02 0.87

      Hose Stem End Connections

      Dimensions
      Part No. Hose I.D. A B
      GD 10556 67 1/4 3.56 1.02
      GD 10556 01 3/8 3.56 1.02

      Flow Capacity
      Series . Ac
      GD 10500 20

      Rated Pressure
      Series PSI Bar
      GD 10500 232 16

      . Air .ow (scfm) with 5 psi pressure drop and 100 psig inlet pressure

       

      Series 180 & 280
      1/8 Nominal

       

       

      Miniature Ball Lock Quick-Connect Couplings designed for use with compressed air, gases and liquids.
      Features
      . Ball lock
      . Manual operation
      . Series 180 and 280 sockets mate with all Series 180 plugs
      . Series 180 socket has a tire valve.
      Series 280 socket has a 1-HK valve, which provides higher .ow capacity.
      . Viton seals available as an option.
      Add -143 suf.x to socket part number when ordering.
      Standard Materials
      . Socket
      - Brass Body and Sleeve
      - Valve
      180: Nickel Plated Brass Tire Valve 280: Brass Series 1-HK Valve
      - Buna-N (Nitrile) Seals
      - Stainless Steel Springs
      - Stainless Steel Locking Balls
      . Plug
      - Brass

      Rated Pressure
      Series PSI BAR
      180 700 48
      280 3,000 207

      Flow Capacity
      Series . Ac
      180 2.5
      280 10.0

      . Air .ow (scfm) with 5 psi pressure drop and 100 psig inlet pressure

       

      SOCKETS PLUGS

      Male End Connections

      Part No. Thread Dimensions
      Brass Size A B HEX
      180 1/8-27 NPTF 1.41 0.63 0.56
      28S-25M 1/4-18 NPTF 1.38 0.63 0.56

       

      Part No. Thread Dimensions
      Brass Size C D HEX
      185 1/8-27 NPTF 1.16 0.49 0.44 186 1/4-18 NPTF 1.44 0.63 0.56

       

       

       

      Female End Connections

      Part No. Thread Dimensions
      Brass Size A B HEX
      28S-12F 1/8-27 NPTF 1.78 0.63 0.56

       

      Part No. Thread Dimensions
      Brass Size C D HEX
      183 1/8 NPTF 1.19 0.63 0.56

       

      Hose Stem End Connections

       

      Part No. Hose Dimensions
      Brass I.D. C D
      187 1/8 1.25 0.38
      189 3/16 1.50 0.38

       

      189

      187

      All dimensions in inches.

       

       

       

      Series 600 & 700
      1/4 Nominal

      Series 700 Series 600

       

       

      Quick-Connect Couplings designed for use in oxyacetylene service. Series 600 is used with oxygen. Series 700 is used with acetylene.
      Features
      . Ball lock
      . Manual operation
      . Non-interchangeable designs
      prevent crossing of lines
      . Sleeves are color coded to identify each series:
      - Series 600 sleeves are green
      for oxygen
      - Series 700 sleeves are red
      for acetylene
      . Socket part numbers with the pre.x UL are UL listed for their intended usage
      . Sockets having part numbers with the UL pre.x or SL suf.x have the sleeve lock feature to prevent accidental disconnection
      . Sockets with hose connections cannot be UL listed
      . Series 600 and 700 couplings can also be used with compressed air and other gases
      Standard Materials
      . Socket
      - Brass Body
      - Brass Valve
      - Painted Brass Sleeve
      Green - Series 600
      Red - Series 700
      - Buna-N (Nitrile) Seal
      - Stainless Steel Springs
      - Stainless Steel Locking Balls
      . Plug
      - Brass
      Accessories
      . Dust caps and dust plugs
      (See page 68)

      Rated Pressure
      Series PSI BAR
      600 & 700 1,500 103

      Flow Capacity
      Series . Ac
      600 & 700 20

      . Air .ow (scfm) with 5 psi pressure
      drop and 100 psig inlet pressure

       

      Series 600
      1/4 Nominal

      SOCKETS PLUGS

      Male End Connections

      Part No. Thread Dimensions

      Brass Size C D HEX

      01A 1/8-27 NPTF 1.41 0.63 0.56 03A 1/4-18 NPTF 1.56 0.63 0.56 04-R 9/16-18. 1.41 0.63 0.56

       

      Part No. - Brass Thread Dimensions
      Standard Oxygen Serv. Size A B HEX
      GR-601 UL-601 1/8-27 NPTF 1.94 1.00 0.69 GR-603 UL-603 1/4-18 NPTF 2.09 1.00 0.69 GR-604R UL-604R 9/16-18. 1.97 1.00 0.69 GR-605 UL-605 3/8-18 NPTF 2.09 1.00 0.69

       

       

       

       

      Female End Connections

      Part No. - Brass Thread Dimensions
      Standard Oxygen Serv. Size A B HEX
      GR-600 UL-600 1/8-27 NPTF 1.78 1.00 0.69
      GR-602 UL-602 1/4-18 NPTF 2.00 1.00 0.69
      GR-604 UL-604 3/8-18 NPTF 2.06 1.00 0.69
      GR-605R UL-605R 9/16-18. 2.00 1.00 0.69

       

      Part No. Thread Dimensions
      Brass Size C D HEX
      00A 1/8-27 NPTF 1.22 0.63 0.56 02A 1/4-18 NPTF 1.41 0.77 0.69 05-R 9/16-18. 1.38 0.77 0.69

       

       

      Hose Stem End Connections

      Part No. - Brass Hose Dimensions
      Standard Oxygen Serv. I.D. A B

      GR-606 GR-606-SL 1/4 2.53 1.00
      GR-606P GR-606P-SL 1/4 2.31 1.00
      GR-607 GR-607-SL 5/16 2.53 1.00
      GR-608 GR-608-SL 3/8 2.52 1.00
      GR-608P 3/8 2.41 1.00

       

      Part No. Dimensions
      Brass Hose I.D. C D
      07A 1/4 2.03 0.56
      08A 5/16 2.03 0.56
      09A 3/8 2.04 0.56

       

      Hose Clamp End Connections

      Part No. - Brass Hose Dimensions

      Standard Oxygen Serv. I.D. O.D. A B HEX

      GR-6-0A3 3/16 1/2 2.56 1.00 0.63 GR-6-0B3 GR-6-0B3-SL 1/4 1/2 2.62 1.00 0.63 GR-6-0B5 GR-6-0B5-SL 1/4 9/16 2.62 1.00 0.69 GR-6-0B7 GR-6-0B7-SL 1/4 5/8 2.62 1.00 0.75 GR-6-0C5 5/16 9/16 2.69 1.00 0.69 GR-6-0C7 5/16 5/8 2.69 1.00 0.75 GR-6-0C9 5/16 11/16 2.69 1.00 0.81 GR-6-0D7 3/8 5/8 2.75 1.00 0.75 GR-6-0D9 3/8 11/16 2.75 1.00 0.81 GR-6-0D11 3/8 3/4 2.75 1.00 0.88

       

      Part No. Hose Dimensions
      Brass I.D. O.D. C D HEX
      6-B3 1/4 1/2 2.13 0.70 0.63 6-B5 1/4 9/16 2.13 0.77 0.69 6-B7 1/4 5/8 2.13 0.84 0.75 6-B9 1/4 11/16 2.13 0.91 0.81 6-D5 3/8 9/16 2.25 0.77 0.69 6-D7 3/8 5/8 2.25 0.84 0.75 6-D9 3/8 11/16 2.25 0.91 0.81 6-D11 3/8 3/4 2.25 0.98 0.88

       

      *45 Male Flare .R.H. Thread - 30 Female Flare .R.H. Thread - Inverted Flare For use with push-on style hose.

      Fittings
      Oxygen AdaptersBrass Pipe-to-Pipe AdaptersBrass Swivel Nut Hose Clamps
      9/16C18 Right-Hand Thread for Oxygen Service

       

      Part No. I.D. Hose O.D. Hose
      4RA0 3/16 7/16
      4RA3 3/16 1/2
      4RB1 1/4 15/32
      4RB3 1/4 1/2
      4RB5 1/4 9/16
      4RB7 1/4 5/8
      4RD7 3/8 5/8
      4RD9 3/8 11/16
      4RD11 3/8 3/4

      Part No. Connection
      18-MAM 1/8 MPT x 1/4 MPT
      19-MBM 1/4 MPT x 1/4 MPT
      20-MBM 1/4 MPT x 3/8 MPT

      Part No. Connection
      9-MBR 1/4 MPT x 9/16C18 RHT

       

      Series UL-600 couplings are not to be used with oxygen at pressures exceeding 100 psig in order to comply with
      UL listings.

      Series UL-600 and UL-700 Couplings with sleeve lock feature comply with O.S.H.A. requirements, Sec. 1915.35 (f)(5), 1916.35 (f)(5), 1917.35 (f)(5), and 1926.350 (f)(5); and are Underwriters Laboratories, Inc. listed for use with oxy-acetylene welding and cutting apparatus, .le SA 1296.

       

      Oxygen increases combustibility. Fire and explosion could occur causing severe bodily injury or death. Be sure to select the proper coupling for your application and use it only within the speci.ed service pressure range.

      All dimensions in inches.

      Series 700
      1/4 Nominal

      SOCKETS PLUGS

      Male End Connections

      Part No. Thread Dimensions

      Brass Size C D HEX

      A1 1/8-27 NPTF 1.47 0.63 0.56 A3P 1/4-18 NPTF 1.63 0.63 0.56 A4-L 9/16-18. 1.50 0.63 0.56

       

      Part No. - Brass Thread Dimensions
      Standard Acetyl. Serv. Size A B HEX
      RD-701 1/8-27 NPTF 1.94 1.00 0.69 RD-703 UL-703 1/4-18 NPTF 2.09 1.00 0.69 RD-704L UL-704L 9/16-18. 1.97 1.00 0.69 RD-705 UL-705 3/8-18 NPTF 2.09 1.00 0.69

       

      Female End Connections

      Part No. - Brass Thread Dimensions
      Standard Acetyl. Serv. Size A B HEX
      RD-700 UL-700 1/8-27 NPTF 1.78 1.00 0.69 RD-702 UL-702 1/4-18 NPTF 2.00 1.00 0.69 RD-704 UL-704 3/8-18 NPTF 2.06 1.00 0.69 RD-705L UL-705L 9/16-18. 2.00 1.00 0.69

       

      Part No. Thread Dimensions
      Brass Size C D HEX
      A2 1/4-18 NPTF 1.46 0.77 0.69 A5-L 9/16-18. 1.38 0.77 0.69

       

       

       

      Hose Stem End Connections

      Part No. Dimensions
      Brass Hose I.D. C D
      A7 1/4 2.06 0.56 A8 5/16 2.06 0.56 A9 3/8 2.10 0.56

       

      Part No. - Brass Hose Dimensions
      Standard Acetyl. Serv. I.D. A B

      RD-706 RD-706-SL 1/4 2.53 1.00
      RD-706P 1/4 2.31 1.00
      RD-707 RD-707-SL 5/16 2.53 1.00
      RD-708 RD-708-SL 3/8 2.52 1.00

      Hose Clamp End Connections

      Part No. - Brass Hose Dimensions

      Standard Acetyl. Serv. I.D. O.D. A B HEX

      RD-7-0A3 3/16 1/2 2.56 1.00 0.63 RD-7-0B3 RD-7-0B3-SL 1/4 1/2 2.62 1.00 0.63 RD-7-0B5 RD-7-0B5-SL 1/4 9/16 2.62 1.00 0.69 RD-7-0B7 1/4 5/8 2.62 1.00 0.75 RD-7-0D7 3/8 5/8 2.75 1.00 0.75 RD-7-0D9 3/8 11/16 2.75 1.00 0.81 RD-7-0D11 3/8 3/4 2.75 1.00 0.88

       

      Part No. Hose Dimensions
      Brass I.D. O.D. C D HEX
      7-B3 1/4 1/2 2.19 0.70 0.63 7-B5 1/4 9/16 2.19 0.77 0.69 7-B7 1/4 5/8 2.19 0.84 0.75 7-B11 1/4 3/4 2.19 0.98 0.88

       

      .L.H. Thread - 30 Female Flare .L.H. Thread - Inverted Flare For use with push-on style hose.

      Fittings
      Pipe-to-Pipe AdaptersBrass Swivel Nut Hose Clamps
      9/16C18 Left-Hand Thread for Acetylene Service

      Part No. Connection
      18-MAM 1/8 MPT x 1/4 MPT
      19-MBM 1/4 MPT x 1/4 MPT
      20-MBM 1/4 MPT x 3/8 MPT

      Part No. I.D. Hose O.D. Hose
      4LA0 3/16 7/16
      4LA3 3/16 1/2
      4LB3 1/4 1/2
      4LB5 1/4 9/16

      Series UL-700 couplings are not to be used with acetylene at pressures exceeding 15 psig in order to comply with
      UL listings.

      Series UL-600 and UL-700 Couplings with sleeve lock feature comply with O.S.H.A. requirements, Sec. 1915.35 (f)(5), 1916.35 (f)(5), 1917.35 (f)(5), and 1926.350 (f)(5); and are Underwriters Laboratories, Inc. listed for use with oxyacetylene welding and cutting apparatus,
      .le SA 1296.

       

      Acetylene is combustible. Fire and explosion could occur causing severe bodily injury or death. Be sure to select the proper coupling for your application and use it only within the specified service pressure range.

      All dimensions in inches.

      Series 2RL & 3RL

       

      Ring-Lock Quick-Connect Couplings have a unique interchange which Hansen designed for use with com-pressed air. Body sizes are 1/4 and 3/8.
      Features
      . High .ow capacity
      - 2RL .ow equals that of most
      3/8 couplings
      - 3RL .ow equals that of most 1/2 couplings
      . Ring lock
      . Push to connect
      . Will not disconnect when hose is
      dragged on the ground
      . Rotate locking sleeve approximately 20 to disconnect
      . Optional seal materials available
      Standard Materials
      . Socket
      - Zinc Plated Steel Body
      - Brass Socket End
      - Nickel Plated Steel Sleeve - Zinc Plated Steel Valve
      - Buna-N (Nitrile) Seal
      - Stainless Steel Spring
      - Zinc Plated Steel Locking Ring
      . Plug
      - Zinc Plated Case-Hardened Steel
      Accessories
      . Dust caps and dust plugs (See page 68)

      Rated Pressure
      Series Size PSI BAR
      2-RL 1/4 300 20
      3-RL 3/8 300 20

      Flow Capacity
      Series . Ac
      2-RL 48
      3-RL 80

      . Air .ow (scfm) with 5 psi pressure drop and 100 psig inlet pressure

      Series 2RL 1/4 Nominal

      SOCKETS PLUGS

      Male End Connections

       

      Female End Connections

       

      Hose Stem End Connections
      Hose Clamp End Connections

       

       

       

      Part No. Thread Dimensions
      Steel Size C D HEX
      2-L10 1/8-27 NPTF 1.51 0.58 0.50 2-L15 1/4-18 NPTF 1.66 0.65 0.56 2-L15G. 1/4-18 NPTF 2.64 0.77 0.69 2-L20 3/8-18 NPTF 2.04 0.79 0.69 2-L20G. 3/8-18 NPTF 2.64 0.77 0.69 2-L25 1/2-14 NPTF 2.31 1.01 0.88

       

      Thread Dimensions
      Part No. Size A B HEX
      2-R10 1/8-27 NPTF 2.01 1.06 0.88 2-R15 1/4-18 NPTF 2.16 1.06 0.88 2-R20 3/8-18 NPTF 2.16 1.06 0.88 2-R25 1/2-14 NPTF 2.35 1.06 0.88

       

       

      Thread Dimensions
      Part No. Size A B HEX
      2-R11 1/8-27 NPTF 1.91 1.06 0.88 2-R16 1/4-18 NPTF 1.91 1.06 0.88 2-R21 3/8-18 NPTF 2.16 1.06 0.88 2-R26 1/2-14 NPTF 2.43 1.06 1.00

       

      Part No. Thread Dimensions
      Steel Size C D HEX
      2-L11 1/8-27 NPTF 1.36 0.65 0.56 2-L16 1/4-18 NPTF 1.54 0.79 0.69 2-L16G. 1/4-18 NPTF 2.55 0.77 0.69 2-L21 3/8-18 NPTF 1.88 0.94 0.81 2-L26 1/2-14 NPTF 2.18 1.15 1.00

       

       

      Dimensions
      Part No. Hose I.D. A B
      2-R17 1/4 2.63 1.06
      2-R195 5/16 2.63 1.06
      2-R22 3/8 2.63 1.06
      2-R27 1/2 2.63 1.06

       

      Part No. Dimensions
      Steel Hose I.D. C D
      2-L17 1/4 2.13 0.56
      2-L195 5/16 2.13 0.56
      2-L22 3/8 2.13 0.56
      2-L27 1/2 2.50 0.81

       

       

      Hose Dimensions
      Part No. I.D. O.D. A B HEX
      2-R18B1 1/4 15/32 2.73 1.06 0.63 2-R18B3 1/4 1/2 2.73 1.06 0.63 2-R18B5 1/4 9/16 2.73 1.06 0.69 2-R18B7 1/4 5/8 2.73 1.06 0.75 2-R18B9 1/4 11/16 2.73 1.06 0.81 2-R18B11 1/4 3/4 2.73 1.06 0.88 2-R185C5 5/16 9/16 2.79 1.06 0.69 2-R185C7 5/16 5/8 2.79 1.06 0.75 2-R185C9 5/16 11/16 2.79 1.06 0.81 2-R23D5 3/8 9/16 2.85 1.06 0.69 2-R23D7 3/8 5/8 2.85 1.06 0.75 2-R23D9 3/8 11/16 2.85 1.06 0.81 2-R23D11 3/8 3/4 2.85 1.06 0.88 2-R23D13 3/8 13/16 2.85 1.06 0.94 2-R23D15 3/8 7/8 2.85 1.06 1.00 2-R28P13 1/2 13/16 3.48 1.06 0.94 2-R28P15 1/2 7/8 3.48 1.06 1.00

       

      Part No. Hose Dimensions
      Steel I.D. O.D. C D HEX
      2-L18B1 1/4 15/32 2.23 0.70 0.63 2-L18B3 1/4 1/2 2.23 0.70 0.63 2-L18B5 1/4 9/16 2.23 0.77 0.69 2-L18B7 1/4 5/8 2.23 0.84 0.75 2-L18B9 1/4 11/16 2.23 0.91 0.81 2-L18B11 1/4 3/4 2.23 0.98 0.88 2-L185C5 5/16 9/16 2.29 0.77 0.69 2-L185C7 5/16 5/8 2.29 0.84 0.75 2-L185C9 5/16 11/16 2.29 0.91 0.81 2-L23D5 3/8 9/16 2.35 0.77 0.69 2-L23D7 3/8 5/8 2.35 0.84 0.75 2-L23D9 3/8 11/16 2.35 0.91 0.81 2-L23D11 3/8 3/4 2.35 0.98 0.88 2-L23D13 3/8 13/16 2.35 1.05 0.94 2-L23D15 3/8 7/8 2.35 1.12 1.00 2-L28P13 1/2 13/16 3.41 1.05 0.94 2-L28P15 1/2 7/8 3.41 1.12 1.00

       

      .With Bleeder Ball Check C Reduces hose whip when disconnecting.

      How to build a socket part number with options:

      Example: 2-R16 - 143

      Notes: 1) Some part numbers may be subject to minimum order quantities.
      2) Options not shown may be available by special quotation.
      Consult your Hansen distributor.

      Seal Material:
      138 = Silicone
      143 = Viton
      192 = EPDM

      Standard Part Number
      from Socket Tables Above

      All dimensions in inches.

      Series 3RL 3/8 Nominal

      Male End Connections

       

       

      Female End Connections

       

       

      Hose Stem End Connections

       

       

       

       

      Hose Clamp End Connections

       

       

       

      SOCKETS PLUGS

      Part No. Thread Dimensions
      Steel Size C D HEX
      3-L10 1/8-27 NPTF 1.54 0.72 0.63 3-L15 1/4-18 NPTF 1.70 0.72 0.63
      3-L15G. 1/4-18 NPTF 2.64 0.98 0.88 3-L20 3/8-18 NPTF 1.76 0.79 0.69 3-L20G. 3/8-18 NPTF 2.64 0.98 0.88 3-L25 1/2-14 NPTF 2.31 1.01 0.88 3-L25G. 1/2-14 NPTF 2.83 0.98 0.88 3-L30 3/4-14 NPTF 2.38 1.23 1.06 3-L30G. 3/4-14 NPTF 2.88 1.19 1.06

       

      Thread Dimensions
      Part No. Size A B HEX
      3-R15 1/4-18 NPTF 2.34 1.31 1.00
      3-R20 3/8-18 NPTF 2.35 1.31 1.00
      3-R25 1/2-14 NPTF 2.54 1.31 1.00
      3-R30 3/4-14 NPTF 2.54 1.31 1.06

       

       

      Thread Dimensions
      Part No. Size A B HEX
      3-R16 1/4-18 NPTF 2.29 1.31 1.00 3-R21 3/8-18 NPTF 2.35 1.31 1.00 3-R26 1/2-14 NPTF 2.63 1.31 1.00 3-R31A 3/4-14 NPTF 2.66 1.31 1.19

       

      Part No. Thread Dimensions
      Steel Size C D HEX
      3-L16 1/4-18 NPTF 1.48 0.79 0.69 3-L16G. 1/4-18 NPTF 2.39 0.98 0.88 3-L21 3/8-18 NPTF 1.63 0.94 0.81 3-L21G. 3/8-18 NPTF 2.64 0.98 0.88 3-L26 1/2-14 NPTF 2.25 1.15 1.00 3-L26G. 1/2-14 NPTF 2.91 0.98 0.88 3-L31 3/4-14 NPTF 2.25 1.37 1.19

       

       

      Dimensions
      Part No. Hose I.D. A B
      3-R17 1/4 2.82 1.31
      3-R195 5/16 2.85 1.31
      3-R22 3/8 2.89 1.31
      3-R27 1/2 2.81 1.31
      3-R32 3/4 3.66 1.31

       

      Part No. Dimensions
      Steel Hose I.D. C D
      3-L17 1/4 2.16 0.63 3-L195 5/16 2.16 0.63 3-L195G. 5/16 3.11 0.98 3-L22 3/8 2.16 0.75 3-L22G. 3/8 3.11 0.98 3-L27 1/2 2.16 0.81 3-L27G. 1/2 3.11 0.98 3-L32 3/4 3.13 1.00 3-L32G. 3/4 3.96 0.98

       

       

      Part No. Hose Dimensions
      Steel I.D. O.D. C D HEX
      3-L23D5 3/8 9/16 2.45 0.77 0.69 3-L23D7 3/8 5/8 2.45 0.84 0.75 3-L23D9 3/8 11/16 2.45 0.91 0.81 3-L23D11 3/8 3/4 2.45 0.98 0.88 3-L23D13 3/8 13/16 2.45 1.05 0.94 3-L23D15 3/8 7/8 2.45 1.12 1.00 3-L28P13 1/2 13/16 3.14 1.05 0.94
      3-L28P15 1/2 7/8 3.14 1.12 1.00 3-L28P17 1/2 15/16 3.14 1.19 1.06 3-L28P19 1/2 1 3.14 1.26 1.13
      3-L33R23 3/4 11/8 3.56 1.40 1.25 3-L33R25 3/4 13/16 3.56 1.47 1.31 3-L33R27 3/4 11/4 3.56 1.54 1.38

       

      Hose Dimensions
      Part No. I.D. O.D. A B HEX
      3-R23D5 3/8 9/16 3.06 1.31 0.69 3-R23D7 3/8 5/8 3.06 1.31 0.75 3-R23D9 3/8 11/16 3.06 1.31 0.81 3-R23D11 3/8 3/4 3.06 1.31 0.88 3-R23D13 3/8 13/16 3.06 1.31 0.94 3-R23D15 3/8 7/8 3.06 1.31 1.00 3-R28P13 1/2 13/16 3.66 1.31 0.94 3-R28P15 1/2 7/8 3.66 1.31 1.00 3-R28P17 1/2 15/16 3.66 1.31 1.06 3-R28P19 1/2 1 3.66 1.31 1.13 3-R33R23 3/4 11/8 3.79 1.31 1.25 3-R33R25 3/4 13/16 3.79 1.31 1.31 3-R33R27 3/4 11/4 3.79 1.31 1.38

       

      .With Bleeder Ball Check C Reduces hose whip when disconnecting.

      How to build a socket part number with options:

      Example: 3-R21 - 143

      Notes: 1) Some part numbers may be subject to minimum order quantities.
      2) Options not shown may be available by special quotation.
      Consult your Hansen distributor.

      Standard Part Number
      from Socket Tables Above

      Seal Material:
      143 = Viton

       

      All dimensions in inches.

       

       

       

      TWO-WAY

      TWO-WAY

      33

      34

      HANSEN COUPLINGS

      HANSEN COUPLINGS

       

      TWO-WAY COUPLINGS

      33

      33

      Contents and Selector Chart

       

      Coupling Style

      Body
      Material

      Locking Mechanism

      Body Size

      Options

      MANUAL CONNECT
      PUSH-TO- CONNECT
      MINIMUM SPILL/INCLUSION
      1/8 INCH
      1/4 INCH
      3/8 INCH
      1/2 INCH
      3/4 INCH
      1 INCH
      1. INCH
      1. INCH
      2. INCH
      BRASS
      STEEL (Zinc/Chromate Finish)
      STAINLESS STEEL (303)
      STAINLESS STEEL (316)
      PLASTIC (Polypropylene)
      BALL LOCK
      THREADED SLEEVE
      PLASTIC FINGERS
      SLEEVE LOCK
      SEAL MATERIALS (Various)
      DUST CAP/PLUG

      Coupling
      Series Page
      1-HK 35 . . . . . . . . . .
      2-HK 35 . . . . . . . . . .
      P2-HK 35 . . . . . .
      3-HK 35 . . . . . . . . . .
      4-HKP 35 . . . . . . . . . .
      6-HKP 35 . . . . . . . . . .
      8-HKP 35 . . . . . . . . . .
      10-HK 38 . . . . . . . .
      12-HK 38 . . . . . . . . .
      20-HK 38 . . . . . . . . .
      HA 15000 40 . . . . . . . . .
      FF 42 . . . . . . . . . . .
      96 44 . . . . . . .
      UP 45 . . . . .
      WA 56000 46 . . . . . .
      2-HKIG 48 . . . . . .
      2-HKIL 48 . . . . . .
      4-DB 49 . . . . . .
      8-DB 49 . . . . . .
      WA 10000 50 . . . . . . . . .
      Sleeve lock is standard.

      Series HK ISO 7241-1 Series B

      Series 1-HK to 8-HKP

      Series 10-HK, 12-HK & 20-HK

       

       

      Series HK Couplings are designed for general purpose hydraulic service. Some are suitable for use with various liquids, chemicals, steam, gases and vacuum. Series HK couplings conform to the dimensional requirements of ISO 7241-1 Series B. Body sizes range from 1/8" to 2.".
      Features
      . Brass, steel and stainless steel construction
      available in all sizes; polypropylene available in 1/4" body size
      . End connections are female NPTF, BSPP and SAE o-ring boss
      . UL listed couplings for use on LP gas fueled lift trucks and tractors available in 1/8", 1/4" and 3/8" body sizes
      . Heavy duty steel couplings for use in high impulse service available in most sizes
      . Steam coupling available in 3/8" body size
      Standard Materials
      . Brass, zinc-plated steel, stainless steel and polypropylene (1/4" only) construction
      . Stainless steel springs, balls and retaining rings
      . Buna-N (Nitrile) seals
      . Te.on back-up rings in 1-HK through 8-HKP steel and stainless steel sockets
      Options
      . Non-valved socket and plug
      . Valve actuator in socket or plug
      . Bleeder-style plug
      . Sleeve lock
      . Seals: Te.on, Neoprene,Viton, Buna-N, EPDM and Kalrez (See Elastomer Selection Guide, page 71)
      Accessories
      . Dust caps and dust plugs
      (See page 68)
      . Release clamp with chain

      Rated Pressure and Flow Capacity
      Brass Steel Stainless Steel
      Series Body Size PSI BAR PSI BAR PSI BAR
      1-HK 1/8" 3,000 207 4,000 275 5,000 344
      2-HK 1/4" 2,700 186 5,000 345 3,700 255
      *P2-HK 1/4" 50 4 (+35F to 150F)
      3-HK 3/8" 2,200 152 3,700 255 3,700 255
      4-HKP 1/2" 2,250 155 5,000 345 4,250 293
      6-HKP 3/4" 2,000 138 4,000 275 3,500 242
      8-HKP 1" 1,500 103 4,000 275 2,500 173
      10-HK 1." 1,200 83 1,700 118 1,700 118
      12-HK 1." 1,500 104 2,200 152 2,200 152
      20-HK 2." 700 49 1,500 104 1,500 104

      * Polypropylene Construction

      Series 1-HK to 8-HK
      ISO 7241-1 Series B

      SOCKETS

      Body Dimensions (inches)
      Size Brass Steel Stainless Steel Thread Size (female) Across
      (inch) Standard UL Listed Standard High Impulse 303 316 NPTF BSPP SAE A B Flats
      1/8 B1-H11 UL1-H11 1-H11 LL1-H11 ML1-H11 1/8-27 1.91 0.98 0.56
      1/8 1-H4 LL1-H4 7/16-20 2.06 0.98 0.69
      1/4 B2-H16 UL2-H16 2-H16 2-H16C LL2-H16 ML2-H16 1/4-18 2.26 1.17 0.75
      1/4 B2-H16BS 2-H16BS LL2-H16BS ML2-H16BS 1/4-19 2.26 1.17 0.75
      1/4 2-H6 2-H6C LL2-H6 9/16-18 2.40 1.17 0.88
      3/8 B3-H21 UL3-H21 3-H21 3-H21C LL3-H21 ML3-H21 3/8-18 2.56 1.42 0.88
      3/8 B3-H21BS 3-H21BS LL3-H21BS ML3-H21BS 3/8-19 2.56 1.42 0.88
      3/8 3-H8 3-H8C LL3-H8 3/4-16 2.74 1.42 1.00
      1/2 B4-HP26 4-HP26 4-HP26 LL4-HP26 ML4-HP26 1/2-14 2.96 1.86 1.13
      1/2 B4-HP26BS 4-HP26BS 4-HP26BS LL4-HP26BS ML4-HP26BS 1/2-14 2.96 1.86 1.13
      1/2 4-HP10 4-HP10 LL4-HP10 7/8-14 3.05 1.86 1.25
      3/4 B6-HP31 6-HP31 6-HP31 LL6-HP31 ML6-HP31 3/4-14 3.48 2.22 1.31
      3/4 B6-HP31BS 6-HP31BS 6-HP31BS LL6-HP31BS ML6-HP31BS 3/4-14 3.48 2.22 1.31
      3/4 6-HP12 6-HP12 LL6-HP12 11/16-12 3.67 2.22 1.38
      1 B8-HP36 8-HP36 8-HP36 LL8-HP36 ML8-HP36 1-111/2 4.13 2.61 1.75
      1 B8-HP36BS 8-HP36BS 8-HP36BS LL8-HP36BS ML8-HP36BS 1-11 4.13 2.61 1.75
      1 8-HP16 8-HP16 LL8-HP16 15/16-12 4.13 2.61 1.88
      A = Overall Length B = Maximum Diameter

      PLUGS

      Body
      Size Brass Steel Stainless Steel Thread Size (female) Dimensions (inches)
      (inch) Standard UL Listed Standard High Impulse 303 316 NPTF BSPP SAE C D E HEX
      1/8 B1-K11 UL1-K11 1-K11 LL1-K11 ML1-K11 1/8-27 1.26 0.65 0.44 0.56
      1/8 1-K4 LL1-K4 7/16-20 1.41 0.79 0.59 0.69
      1/4 B2-K16 UL2-K16 2-K16 2-K16C LL2-K16 ML2-K16 1/4-18 1.52 0.87 0.56 0.75
      1/4 B2-K16BS 2-K16BS LL2-K16BS ML2-K16BS 1/4-19 1.52 0.87 0.56 0.75
      1/4 2-K6 2-K6C LL2-K6 9/16-18 1.66 1.01 0.70 0.88
      3/8 B3-K21 UL3-K21 3-K21 3-K21C LL3-K21 ML3-K21 3/8-18 1.76 1.01 0.61 0.88
      3/8 B3-K21BS 3-K21BS LL3-K21BS ML3-K21BS 3/8-19 1.76 1.01 0.61 0.88
      3/8 3-K8 3-K8C LL3-K8 3/4-16 1.94 1.15 0.79 1.00
      1/2 B4-KP26 4-KP26 4-KP26 LL4-KP26 ML4-KP26 1/2-14 2.03 1.30 0.76 1.13
      1/2 B4-KP26BS 4-KP26BS 4-KP26BS LL4-KP26BS ML4-KP26BS 1/2-14 2.03 1.30 0.76 1.13
      1/2 4-KP10 4-KP10 LL4-KP10 7/8-14 2.11 1.37 0.84 1.19
      3/4 B6-KP31 6-KP31 6-KP31 LL6-KP31 ML6-KP31 3/4-14 2.36 1.52 0.71 1.31
      3/4 B6-KP31BS 6-KP31BS 6-KP31BS LL6-KP31BS ML6-KP31BS 3/4-14 2.36 1.52 0.71 1.31
      3/4 6-KP12 6-KP12 LL6-KP12 11/16-12 2.54 1.59 0.89 1.38
      1 B8-KP36 8-KP36 8-KP36 LL8-KP36 ML8-KP36 1-111/2 2.85 1.88 0.97 1.63
      1 B8-KP36BS 8-KP36BS 8-KP36BS LL8-KP36BS ML8-KP36BS 1-11 2.85 1.88 0.97 1.63
      1 8-KP16 8-KP16 LL8-KP16 15/16-12 2.85 2.17 0.97 1.88
      C = Overall Length D = Maximum Diameter E = Exposed Length when Connected

      All dimensions in inches.

      Series 1-HK to 8-HK
      ISO 7241-1 Series B

      Series P2-HK Plastic Coupling
      The Series P2-HK coupling is intended for use with air, water and various chemicals at low pressure. It is designed for use where an economical, light weight, corrorion resistant coupling is desired. All components, except springs and seals, are molded from natural polypropylene with a UV inhibitor. Valve springs are 316 stainless steel. Viton seals are standard. EPDM (192) seals are optional.

      Socket Plug

      Thread Size Dimensions
      Part No. NPTF C D E HEX

      PP2-K25F 1/4-18 1.65 1.01 0.67 0.88

       

      Thread Size Dimensions
      Part No. NPTF A B HEX

      PP2-H25F 1/4-18 2.38 1.45 0.88

       

      Series 3-HK Steam Coupling
      The Hansen Steam Coupling has a large diameter .ange on the sleeve to aid gripping while the user wears heavy gloves.
      EPDM (192) seals are standard, and can be used with steam at temperatures up to 350F. Options are BSPP threads, sleeve lock, EPDM (236) seals, for use with steam at temperatures above 350F, and Viton (143) seals.

      Socket Plug

      Thread Size Dimensions
      Part No. NPTF C D E HEX

      B3-K21-192 3/8-18 1.76 1.01 0.61 0.88

       

      Dimensions
      Thread Size Across
      Part No. NPTF A B Flats

      B3-H21Y 3/8-18 2.56 1.75 0.88

      Release Clamp with Chain
      When .uid lines may be subjected to a damaging pull, couplings can be mounted to disconnect automatically, sealing both ends of a line against .uid loss. The socket sleeve can be anchored to a stationary bracket, either directly or with a chain. Excessive pull on the plug end of the line moves the socket body forward relative to the sleeve, and the plug is released without damage to the line. Release Clamp Assembly Kits are available for Series 1-HK through 8-HKP sockets.

      Series Kit Part No.
      1-HK 1-HRC-K 2-HK 2-HRC-K 3-HK 3-HRC-K 4-HKP 4-HRC-K 6-HKP 6-HRC-K 8-HKP 8-HRC-K

      Bleeder-Style Plugs
      Bleeder-style plugs can be used on air lines to prevent hose whip when disconnecting a line by reducing the exhaust velocity of air. Bleeder-style plugs can be used on hydraulic lines to prevent static pressure from building up in disconnected lines. Valves of these plugs are manufactured such that a small leak path exists when the plug is disconnected. Bleeder-style plugs are available in Series
      1-HK through 6-HKP.

      Series Plug Part No.
      1-HK B1-K11-VB 2-HK B2-K16-VB 2-HK 2-K16C-VB 3-HK B3-K21-VB 3-HK 3-K21-VB 3-HK 3-K21C-VB 4-HKP 4-KP26-VB 6-HKP B6-KP31-VB 6-HKP 6-KP31-VB

      Series 10-HK/12-HK/20-HK
      ISO 7241-1 Series B

      SOCKETS

      Body
      Size Steel 303 Stainless Thread Size (female) Dimensions (inches)
      (inch) Brass Standard High Impulse Steel NPTF BSPP A B HEX
      11/4 B10-H41 10-H41 LL10-H41 11/4-111/2 4.51 2.73 2.38
      11/4 10-H41BS LL10-H41BS 11/4-11 4.51 2.73 2.38
      11/2 B12-H41 12-H41 12-H41C LL12-H41 11/4-111/2 4.82 3.23 2.38
      11/2 B12-H41BS 12-H41BS LL12-H41BS 11/4-11 4.82 3.23 2.38
      11/2 B12-H46 12-H46 12-H46C LL12-H46 11/2-111/2 4.82 3.23 2.38
      11/2 B12-H46BS 12-H46BS LL12-H46BS 11/2-11 4.82 3.23 2.38
      21/2 B20-H51 20-H51 20-H51C LL20-H51 2-111/2 5.55 4.11 3.75
      21/2 B20-H51BS 20-H51BS LL20-H51BS 2-11 5.55 4.11 3.75
      21/2 B20-H56 20-H56 20-H56C LL20-H56 21/2-8 6.14 4.11 3.75
      21/2 B20-H56BS 20-H56BS LL20-H56BS 21/2-11 6.14 4.11 3.75
      21/2 B20-H61 20-H61 20-H61C LL20-H61 3-8 7.00 4.11 4.00
      21/2 B20-H61BS 20-H61BS LL20-H61BS 3-11 7.00 4.11 4.00
      A = Overall Length B = Maximum Diameter

      PLUGS

      Body
      Size Steel 303 Stainless Thread Size (female) Dimensions (inches)
      (inch) Brass Standard High Impulse Steel NPTF BSPP C D E HEX
      11/4 B10-K41 10-K41 LL10-K41 11/4-111/2 4.25 2.73 2.33 2.38
      11/4 10-K41BS LL10-K41BS 11/4-11 4.25 2.73 2.33 2.38
      11/2 B12-K41 12-K41 12-K41C LL12-K41 11/4-111/2 4.76 3.02 2.67 2.38
      11/2 B12-K41BS 12-K41BS LL12-K41BS 11/4-11 4.76 3.02 2.67 2.38
      11/2 B12-K46 12-K46 12-K46C LL12-K46 11/2-111/2 4.76 3.02 2.67 2.38
      11/2 B12-K46BS 12-K46BS LL12-K46BS 11/2-11 4.76 3.02 2.67 2.38
      21/2 B20-K51 20-K51 20-K51C LL20-K51 2-111/2 5.49 4.31 2.97 3.75
      21/2 B20-K51BS 20-K51BS LL20-K51BS 2-11 5.49 4.31 2.97 3.75
      21/2 B20-K56 20-K56 20-K56C LL20-K56 21/2-8 6.08 4.31 3.56 3.75
      21/2 B20-K56BS 20-K56BS LL20-K56BS 21/2-11 6.08 4.31 3.56 3.75
      21/2 B20-K61 20-K61 20-K61C LL20-K61 3-8 6.94 4.31 4.42 4.00
      21/2 B20-K61BS 20-K61BS LL20-K61BS 3-11 6.94 4.31 4.42 4.00
      C = Overall Length D = Maximum Diameter E = Exposed Length when Connected

      **ISO 7241-1 Series B does not include 1-1/4 inch body size couplings; therefore, Hansen Series 10-HK is not covered by this standard

      All dimensions in inches.

      Series HK
      Special Ordering Instructions

      How to build a socket or plug part number with options:

      Example: 4-HP26 - VAA - SL - 143

      Standard Part Number
      from Part Number Tables

      Seal Material:
      115 = Te.on5
      118 = Neoprene
      143 = Viton
      146 = Buna-N6
      192 = EPDM
      235 = Kalrez7
      236 = EPDM (350F+ Steam)8

      NV = No Valve1
      VAA = Valve Actuator Assembly2
      VB = Bleeder Valve (Plugs Only)3

      SL = Sleeve Lock (Sockets Only)4

      Notes:
      1) The NV option should be speci.ed for a socket and a plug when a non-valved coupling is desired. Non-valved Series 1-HK through 8-HKP plugs do not contain seals. Do not specify a seal material.
      2) The VAA option should be speci.ed for a socket or a plug when a one-way coupling is desired.
      3) The VB option can be ordered for Series 1-HK through 6-HKP plugs to prevent pressure build-up in disconnected hydraulic lines or to reduce hose whip when disconnecting pneumatic lines.
      4) The Sleeve Lock device prevents accidental disconnection. Not available on sockets with pre.x UL.
      5) Series HK couplings are designed for use with elastomer seals. Te.on is not an elastomer. It is rigid and not resilient. Couplings with Te.on seals may leak and/or be dif.cult to connect. Force to connect may be reduced by heating connected couplings in hot water; then, cooling before disconnecting. Te.on seals are available for Series 1-HK through 8-HKP, except Series P2-HK.
      6) The 146 seal option may be speci.ed for fuels and hydraulic .uids that are known to cause standard Buna-N seals to
      swell excessively.
      7) Couplings with Kalrez seals are available by special quotation.
      8) The 236 seal option should be ordered for use with steam at or above 350F. The 192 seal option should be ordered for hot water above 180F and steam below 350F.
      9) Some part numbers may be subject to minimum order quantities.
      10) Some options may be available only by special quotation. Consult your Hansen distributor.

      Series HA 15000
      ISO 7241-1 Series A

       

      The Series HA 15000 is a general purpose hydraulic and .uid transfer coupling that conforms to the dimensional requirements of
      ISO 7241-1 Series A. Body sizes
      are 1/4", 3/8", 1/2", 3/4" and 1".
      Features
      . Ball lock
      . Manual connect, disconnect
      . Poppet valving
      . Slim pro.le
      . Zinc plated steel construction
      . NPTF and BSPP end connections
      . Available push-to-connect socket designed for bulkhead mounting
      (1/2" body size only)
      Standard Materials
      . Zinc-plated steel construction
      . Stainless steel springs, balls and retaining rings
      . Buna-N (Nitrile) seals
      Accessories
      . Dust caps and dust plugs (See page 69)

      Rated Pressure
      Body Size PSI BAR
      1/4" 4,568 315
      3/8" 4,568 315
      1/2" 3,625 250
      3/4" 3,625 250
      1" 2,900 200

      Series HA 15000
      ISO 7241-1 Series A

      SOCKETS

      Body Part Thread Size Dimensions (inches)
      Size Number (female) Across
      (inch) (Steel) NPTF BSPP A B Flats
      1/4 HA 15211 00 1/4-18 1.89 0.98 0.75
      1/4 HA 15011 00 1/4-19 1.89 0.98 0.75
      3/8 HA 15221 00 3/8-18 2.21 1.18 0.91
      3/8 HA 15021 00 3/8-19 2.21 1.18 0.91
      1/2 HA 15231 00 1/2-14 2.64 1.49 1.06
      1/2 HA 15031 00 1/2-14 2.64 1.49 1.06
      1/2 HA 15236 00* 1/2-14 2.64 1.49 1.06
      1/2 HA 15036 00* 1/2-14 2.64 1.49 1.06
      3/4 HA 15241 00 3/4-14 3.25 1.88 1.38
      3/4 HA 15041 00 3/4-14 3.25 1.88 1.38
      1 HA 15251 00 1-111/2 3.86 2.08 1.62
      1 HA 15051 00 1-11 3.86 2.08 1.62
      * Push-to-Connect Socket A = Overall Length B = Maximum Diameter

       

      Push-to-Connect Socket - Part Nos. HA 15036 00 & HA 15236 00
      This system allows automatic connection and disconnection simply by pushing the plug into or pulling it out of the socket body. Pulling on the hose moves the socket body forward rela-tive to the bulkhead mounted double-acting sleeve, and the plug is released without damage to the hose.

      Sleeve dimensions for bulkhead mounting are shown at left.

      PLUGS

      Body Part Thread Size
      Size Number (female) Dimensions (inches)
      (inch) (Steel) NPTF BSPP C D E Hex
      1/4 HA 15212 00 1/4-18 1.41 0.86 0.80 0.75
      1/4 HA 15012 00 1/4-19 1.41 0.86 0.80 0.75
      3/8 HA 15222 00 3/8-18 1.63 1.04 0.79 0.91
      3/8 HA 15022 00 3/8-19 1.63 1.04 0.79 0.91
      1/2 HA 15232 00 1/2-14 1.92 1.22 0.92 1.06
      1/2 HA 15032 00 1/2-14 1.92 1.22 0.92 1.06
      3/4 HA 15242 00 3/4-14 2.42 1.58 1.09 1.38
      3/4 HA 15042 00 3/4-14 2.42 1.58 1.09 1.38
      1 HA 15252 00 1-111/2 2.83 1.85 1.19 1.62
      1 HA 15052 00 1-11 2.83 1.85 1.19 1.62
      C = Overall Length D = Maximum Diameter E = Exposed Length when Connected

      Series FF
      ISO 16028 Flat Face Hydraulic

       

      The Series FF is a .at face dry break or mini-mum spill hydraulic coupling that meets or exceeds the ISO 16028 standard.
      Body sizes: 1/4, 3/8, 1/2, 5/8, 3/4, and 1.

      The Series FF is a .at face dry break or minimum spill hydraulic coupling that meets or exceeds the ISO 16028 standard.
      Body sizes: 1/4, 3/8, 1/2, 5/8, 3/4, and 1.
      Features
      . Meets or exceeds ISO 16028 standard
      . 5075 psi maximum operating pressure for all sizes (connected and disconnected)
      . Push-to-connect
      . Sleeve-locking device to prevent accidental disconnection is standard
      . Excellent mechanical performance (pressure/.ow)
      Standard Materials
      . Zinc plated steel with yellow chromate or QPQ .nish
      . Stainless steel springs and locking balls
      . Buna-N (Nitrile) seals
      (-4 F to +212 F)
      Accessories
      . Dust caps and plugs
      - PVC (red)

      Applications
      . FF series is ideal for applications where hydraulic spillage is a concern and interchangeability with other manufacturers is important.
      - Public Utilities
      - Construction Equipment
      - Agricultural Equipment
      - Mining Equipment
      - Railway Maintenance
      - Overhead bucket hoists
      - Skid steer loaders

       

       

       

       

       

       

      Series UP10 Ultra Pressure
      10,000 psi

       

      The Series UP10 is a high pressure hydraulic quick connect coupling designed to operate at pressures up to 10,000 psi. Its ball lock mecha-nism makes it a true quick connect coupling, as opposed to thread-to-connect couplings that are typically used in high pressure hydraulics. Body size is 1/4".
      Features
      . Ball lock
      . Slim pro.le compared to threaded couplings
      . High strength steel construction
      . Poppet valves with metal-to-metal sealing
      . 1/4" & 3/8" male & female NPTF end connections
      . Standard sleeve lock
      Standard Materials
      . High strength steel bodies and valves
      . Stainless steel springs & balls
      . Buna-N (Nitrile) seals
      . Te.on back-up ring (socket)
      Accessories
      . Dust caps and dust plugs
      (See page 68)

      Rated Pressure
      Series PSI BAR
      UP 10,000 700

      Sockets Plugs

      Male End Connections

      Thread Dimensions
      Part No. Size A B HEX

      UP10S-25M 1/4-18 NPTF 2.69 1.18 0.88
      UP10S-37M 3/8-18 NPTF 2.69 1.18 0.88

      Thread Dimensions
      Part No. Size C D HEX

      UP10P-25M 1/4-18 NPTF 2.59 0.97 0.88
      UP10P-37M 3/8-18 NPTF 2.59 0.97 0.88

       

      Female End Connections

      Thread Dimensions
      Part No. Size C D HEX

      UP10P-25F 1/4-18 NPTF 2.54 0.97 0.88
      UP10P-37F 3/8-18 NPTF 2.59 0.97 0.88

      Thread Dimensions
      Part No. Size A B HEX

      UP10S-25F 1/4-18 NPTF 2.64 1.18 0.88
      UP10S-37F 3/8-18 NPTF 2.69 1.18 0.88

      Series WA 56000 / HP3
      Thread-to-Connect 10,000 psi

      WA 56000

       

      HP3

       

      Series WA 56000 and HP3 are
      high pressure hydraulic screw together couplings designed to operate at pressures up to 10,000 psi. Their rugged design make them suitable for use in hydraulic ram, pump and high impulse applications. Body sizes are 1/4" and 3/8".
      Features
      . Threaded latching
      . Rugged steel construction
      . Poppet valves with elastomer seal standard in 1/4" coupling
      . Poppet valves and ball valves available in 3/8" coupling
      . Body size matches thread size.
      1/4" and 3/8" body sizes do not interchange.
      Standard Materials
      . Zinc plated steel construction
      . High strength steel ball valves
      . Stainless steel springs
      . Buna-N (Nitrile) seals
      . Te.on back-up ring (socket)
      Accessories
      . Dust caps and dust plugs
      (See page 69)

      Rated Pressure
      Body Size PSI BAR
      1/4" 10,000 700
      3/8" 10,000 700

      Sockets C Male End Connections Plugs C Female End Connections

      Thread Dimensions
      Valve Size Across
      Part No. Type NPTF C D Flats

      WA 56514 00 Poppet 1/4-18 1.26 1.10 0.75 WA 56524 00 Poppet 3/8-18 1.52 1.26 0.91
      HP3PB37F Ball 3/8-18 1.52 1.26 0.91

      Thread
      Valve Size Dimensions
      Part No. Type NPTF A B HEX

      WA 56517 00 Poppet 1/4-18 2.36 1.12 0.88 WA 56527 00 Poppet 3/8-18 2.76 1.38 1.06
      HP3SB37M Ball 3/8-18 2.76 1.38 1.06

      Series 2-HKIG & 2-HKIL
      1/4" Nominal

      2-HKIG

       

      2-HKIL

       

      Series 2-HKIG and 2-HKIL Stainless Steel Couplings can be used with various liquids and gases. They are functionally identical, but do not in-terchange. They can be used where it is necessary to avoid crossing lines.
      Features
      . Ball lock
      . Manual operation
      . Noninterchangeable designs
      . 1/4" body size
      . All-stainless steel construction
      . Sockets available with right-angle connection
      Standard Materials
      . Stainless steel bodies, valves and sleeves
      . Stainless steel springs, balls and retaining rings
      . Buna-N (Nitrile) seals
      . Socket identi.cation ring
      - 2-HKIG: White acetal
      - 2-HKIL: Black acetal
      Options
      . Seals: Te.on, Viton, EPDM
      Accessories
      . Dust caps
      (See page 68)

      Rated Pressure
      Series PSI BAR
      2-HKIG & 2-HKIL 1500 103

      Series 2-HKIG & 2-HKIL
      1/4" Nominal

       

      SOCKETS 2-HKIG PLUGS

      Male End Connections

       

       

      Female End Connections

       

       

      Male End Connections

       

      Female End Connections

       

       

       

      Thread Dimensions
      Part No. Size C D HEX
      2-KIG-F15 1/4-18 NPTF 1.98 1.01 0.69 2-KIG-F20 3/8-18 NPTF 1.98 1.01 0.69

      Thread Dimensions
      Part No. Size A B HEX
      2-HIG10 1/8-27 NPTF 2.18 1.06 0.81
      2-HIG15 1/4-18 NPTF 2.31 1.06 0.81
      2-HIG20 3/8-18 NPTF 2.31 1.06 0.81
      2-HIG720 7/16-20* 2.27 1.06 0.81 2-HIG-LLRA720. 7/16-20* 2.09 1.06

      Thread Dimensions
      Part No. Size A B HEX
      2-HIG11 1/8-27 NPTF 2.18 1.06 0.81 2-HIG16 1/4-18 NPTF 2.26 1.06 0.81

      Thread Dimensions
      Part No. Size C D HEX
      2-KIG-F16 1/4-18 NPTF 1.84 1.01 0.69 2-KIG-F720 7/16-20* 1.61 1.01 0.69 2-KIG-F 9/16-18 1.17 1.01 0.88

       

      SOCKETS 2-HKIL PLUGS

      Thread Dimensions
      Part No. Size A B HEX
      2-HIL10 1/8-27 NPTF 2.18 1.06 0.81 2-HIL15 1/4-18 NPTF 2.31 1.06 0.81 2-HIL20 3/8-18 NPTF 2.31 1.06 0.81 2-HIL720 7/16-20* 2.27 1.06 0.81 2-HIL-LLRA720. 7/16-20* 2.09 1.06

      Thread Dimensions
      Part No. Size C D HEX
      2-KIL-F15 1/4-18 NPTF 1.98 1.01 0.69 2-KIL-F20 3/8-18 NPTF 1.98 1.01 0.69

      Thread Dimensions
      Part No. Size A B HEX
      2-HIL11 1/8-27 NPTF 2.18 1.06 0.81 2-HIL16 1/4-18 NPTF 2.26 1.06 0.81

      Hose Dimensions
      Part No. Size C D HEX
      2-KIL-F16 1/4-18 NPTF 1.84 1.01 0.69 2-KIL-F720 7/16-20* 1.61 1.01 0.69 2-KIL-F 5/8-18 1.17 1.01 0.88

      * 1/4" SAE Flare . Right-Angle End Connection

      How to build a socket or plug part number with options:

      Example: 2-HIG15 - 143

      Notes: 1) Some part numbers may be subject to minimum order quantities.
      2) Options not shown may be available by special quotation.
      Consult your Hansen distributor.

      Seal Material:
      115 = Te.on
      143 = Viton
      192 = EPDM

      Standard Part Number
      from Tables Above

      Series DB
      316 Stainless Steel Flat Face

       

      The Series DB is designed for .uid handling where minimum spillage and minimum air inclusion are required. Couplings in this series are constructed of 316L stainless steel, which makes them suitable for use in chemical, pharmaceutical and food processing industries.
      Body sizes are 1/4, 3/8, 1/2", 3/4 and 1".
      Features
      . Ball lock
      . Push-to-connect
      . Minimal .uid loss when disconnecting
      . Minimal air inclusion when connecting
      . High .ow capacity
      . NPTF and BSPP threads available.
      Standard Materials
      . 316L stainless steel construction
      . Viton seals
      Options
      . Various seal materials available.

      Rated Pressure
      Body Socket Plug Connected
      Size PSI BAR PSI BAR PSI BAR
      1/4-1 1,450 100 2,030 140 2,030 140

      Spillage & Air Inclusion
      Spillage Air Inclusion
      Body Max. per Max. per
      Size Disconnect Connect
      1/4" .01 ml .01 ml
      3/8" .02 ml .02 ml
      1/2" .02 ml .02 ml
      3/4" .02 ml .03 ml
      1" .04 ml .13 ml

      Sockets Plugs

      Body Thread
      Size Size Dimensions
      (inch) Part No. (Female) A B HEX

      1/4 2DBS-25F 1/4-18 NPTF 1.98 1.02 0.88 1/4 2DBS-25FBS 1/4-19 BSPP 1.98 1.02 0.88
      3/8 3DBS-37F 3/8-18 NPTF 2.36 1.27 1.00
      3/8 3DBS-37FBS 3/8-19 BSPP 2.36 1.27 1.00
      1/2 4DBS-50F 1/2-14 NPTF 2.52 1.59 1.38
      1/2 4DBS-50FBS 1/2-14 BSPP 2.52 1.59 1.38 3/4 6DBS-75F 3/4-14 NPTF 3.71 2.00 1.50
      3/4 6DBS-75FBS 3/4-14 BSPP 3.71 2.00 1.50
      1 8DBS-100F 1-111/2 NPTF 3.52 2.25 1.81
      1 8DBS-100FBS 1-11 BSPP 3.52 2.25 1.81

      Body Thread
      Size Size Dimensions
      (inch) Part No. (Female) C D HEX

      1/4 2DBP-25F 1/4-18 NPTF 1.65 0.94 0.81 1/4 2DBP-25FBS 1/4-19 BSPP 1.65 0.94 0.81
      3/8 3DBP-37F 3/8-18 NPTF 2.34 1.08 0.94
      3/8 3DBP-37FBS 3/8-19 BSPP 2.34 1.08 0.94 1/2 4DBP-50F 1/2-14 NPTF 2.63 1.37 1.18
      1/2 4DBP-50FBS 1/2-14 BSPP 2.63 1.37 1.18 3/4 6DBP-75F 3/4-14 NPTF 3.68 1.88 1.63
      3/4 6DBP-75FBS 3/4-14 BSPP 3.68 1.88 1.63
      1 8DBP-100F 1-111/2 NPTF 3.52 2.08 1.81
      1 8DBP-100FBS 1-11 BSPP 3.52 2.08 1.81

      All dimensions in inches.

      Series WA 10000
      Refrigerant and Fluid Transfer

       

      The Series WA 10000 is a thread together, minimum spill/inclusion coupling designed for refrigeration, air conditioning, gas and liquid trans-fer applications.
      Features
      . Dry break design minimizes .uid loss and air inclusion
      . Threaded connection permits connecting and disconnecting under pressure
      . Brazed or threaded end connections available
      . Male half can be bulkhead mounted
      . Interchanges with refrigerant couplings existing on the market
      Standard Materials
      . Zinc plated steel construction
      . HNBR and Neoprene seals
      Accessories
      . SAE 37 (JIC) adapters (steel)
      . Braze adapters (brass)
      . O-rings for adapters
      . Dust caps and dust plugs

      Rated Pressure
      Dash Female Half Male Half Connected
      Size PSI BAR PSI BAR PSI BAR
      -8 435 30 1,160 80 1,810 125
      -12 435 30 1,015 70 1,015 70
      -16 360 25 725 50 725 50

      Series WA 10000
      Refrigerant and Fluid Transfer

      Dimensions (inches)

      Female Half

      Male Half

      * Connected
      Length
      (no adapter)
      H

      Overall
      Length
      A

      Max.
      Dia.
      B

      Hex
      Size
      C

      Overall
      Length
      E

      Max.
      Dia.
      F

      Hex
      Size
      G

      Hex
      Size
      D

      Coupling
      Dash
      Size

      Seal
      Material

      Part No.

      Part No.

      -8 HNBR WA 10037 I0 1.66 1.30 1.18 1.02 WA 10034 I0 1.38 1.26 1.15 2.67
      -8 Neoprene WA 10037 M0 1.66 1.30 1.18 1.02 WA 10034 M0 1.38 1.26 1.15 2.67
      -12 HNBR WA 10057 I0 2.17 1.77 1.62 1.38 WA 10054 I0 1.73 1.77 1.62 3.33
      -12 Neoprene WA 10057 M0 2.17 1.77 1.62 1.38 WA 10054 M0 1.73 1.77 1.62 3.33
      -16 HNBR WA 10067 I0 2.40 2.21 1.97 1.77 WA 10064 I0 1.98 2.09 1.89 3.75
      -16 Neoprene WA 10067 M0 2.40 2.21 1.97 1.77 WA 10064 M0 1.98 2.09 1.89 3.75

      * To calculate the overall length of a connected coupling with adapters installed, add the exposed lengths of two adapters to the connected length with no adapter (Connected Length with Adapters = H + 2 x K).

      Maximum Bulkhead Thickness (inches)

      Coupling
      Dash
      Size

      Assembly Torque, lb-ft

      With Lock
      Washer

      Without Lock
      Washer

      Male/Female

      Adapter/Body

      -8 0.16 0.28 25-30 15-20
      -12 0.23 0.34 40-45 20-25
      -16 0.22 0.28 50-55 25-30

      All dimensions in inches.

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

      STRAIGHT-
      THROUGH

      STRAIGHT-
      THROUGH

      53

      54

      HANSEN COUPLINGS

      HANSEN COUPLINGS

       

      STRAIGHT-THROUGH
      COUPLINGS

      53

      Contents and Selector Chart

       

      Body
      Material

      Locking Mecha-nism

      Body Size

      Options

      1/8 INCH
      1/4 INCH
      3/8 INCH
      1/2 INCH
      3/4 INCH
      1 INCH
      1. INCH
      1. INCH
      2 INCH
      2. INCH
      BRASS
      STEEL (Plugs Only)
      STAINLESS STEEL (303)
      PLASTIC (Polypropylene)
      BALL LOCK
      PLASTIC FINGERS
      SLEEVE LOCK
      SEAL MATERIALS (Various)
      DUST CAP/PLUG (Vinyl)

      Coupling
      Series Page
      1-ST 54 . . . . . . .
      2-ST 54 . . . . . . .
      3-ST 54 . . . . . . .
      4-ST 54 . . . . . . .
      6-ST 54 . . . . . . .
      8-ST 54 . . . . . . . .
      10-ST 54 . . . . . . . .
      12-ST 54 . . . . . . .
      16-ST 54 . . . . . . .
      20-ST 54 . . . . . .
      P2-ST 56 . . .
      P3-ST 56 . . .
      GH 56 . . .
      Flo-Temp 57 . . . . . .
      Socket dust plug only
      Socket dust plug and plug dust cap
      . Plug dust cap only

      Series ST Straight-Through

       

      Series ST straight-through couplings are designed for use where minimum pressure drop is required and valving is not needed. They are well suited for use on pressure wash, steam cleaning and carpet cleaning equipment, and many .uid transfer systems. Body sizes range from 1/8"
      to 2-1/2".
      Features
      . Ball lock
      . Manual operation
      . Smooth bore permits free .ow of liquid or gas.
      . Male and female NPTF, BSPP and hose stem connections
      Standard Materials
      . Brass or 303 stainless steel socket construction
      . Stainless steel springs, balls and retaining rings
      . Brass, zinc plated steel and 303 stainless steel plugs
      . High impulse heat treated 416 stainless steel plugs available in 1/4" and 3/8" body sizes
      . Buna-N (Nitrile) seals
      Options
      . Sleeve lock
      . Seals: Te.on (1-ST through 8-ST), Neoprene, Viton, Buna-N and EPDM (See Elastomer Selection Guide, page 71)
      Accessories
      . Dust caps and dust plugs for a limited number of sizes
      (See page 68)

      *Rated Pressure
      Brass Socket Brass Socket Stainless Steel
      Body Brass Plug Steel Plug Socket & Plug
      Series Size PSI BAR PSI BAR PSI BAR
      1-ST 1/8" 2,800 193 3,400 234 4,200 290
      2-ST 1/4" 5,200 359 5,500 379 7,500 517
      3-ST 3/8" 2,800 193 4,200 290 6,300 434
      4-ST 1/2" 2,200 152 3,500 241 3,600 248
      6-ST 3/4" 1,700 117 2,100 145 3,000 207
      8-ST 1" 1,300 90 2,000 138 2,000 138
      10-ST 11/4" 1,700 117 2,700 186 2,200 152
      12-ST 11/2" 1,400 97 2,200 152 2,500 172
      16-ST 2" 1,400 97 2,200 152 1,500 103
      20-ST 21/2" 900 62 1,500 103 C C

      * Pressure ratings are for sockets and plugs with threaded end connections. Pressure ratings of couplings with hose stems may be signi.cantly lower, and will depend on the type of hose and the method of clamping. Refer to hose manufacturers end connection pressure ratings. The best way to determine suitability for an application is to run pressure testing under controlled conditions.

       

      Series ST Straight-Through

      Sockets

      Male End Connections

      Body Part Number Thread Size Dimensions
      Size Brass Stainless NPTF BSPP A B Hex
      1/8 1-S10 LL1-S10 1/8-27 1.06 0.69 0.50
      1/8 1-S10BS LL1-S10BS 1/8-28 1.00 0.69 0.56
      1/4 2-S15 LL2-S15 1/4-18 1.72 0.94 0.81
      1/4 2-S15BS LL2-S15BS 1/4-19 1.56 0.94 0.81
      3/8 3-S20 LL3-S20 3/8-18 1.75 1.13 1.00
      3/8 3-S20BS LL3-S20BS 3/8-19 1.62 1.13 1.00
      1/2 4-S25 LL4-S25 1/2-14 2.03 1.31 1.13
      1/2 4-S25BS LL4-S25BS 1/2-14 1.80 1.31 1.13
      3/4 6-S30 LL6-S30 3/4-14 2.22 1.69 1.44
      3/4 6-S30BS 3/4-14 2.03 1.69 1.44
      1 8-S35 1-111/2 2.53 2.00 1.75
      1 8-S35BS 1-11 2.37 2.00 1.75

       

      Female End Connections

      Body Part Number Thread Size Dimensions
      Size Brass Stainless NPTF BSPP A B Hex

      1/8 1-S11 LL1-S11 1/8-27 1.06 0.69 0.50
      1/8 1-S11BS LL1-S11BS 1/8-28 1.03 0.69 0.56
      1/4 2-S16 LL2-S16 1/4-18 1.50 0.94 0.81
      1/4 2-S16BS LL2-S16BS 1/4-19 1.50 0.94 0.81
      3/8 3-S21 LL3-S21 3/8-18 1.59 1.13 1.00
      3/8 3-S21BS LL3-S21BS 3/8-19 1.59 1.13 1.00
      1/2 4-S26 LL4-S26 1/2-14 1.91 1.31 1.13
      1/2 4-S26BS LL4-S26BS 1/2-14 1.91 1.31 1.13
      3/4 6-S31 LL6-S31 3/4-14 2.06 1.69 1.44
      3/4 6-S31BS LL6-S31BS 3/4-14 2.06 1.69 1.44
      1 8-S36 LL8-S36 1-111/2 2.31 2.00 1.75
      1 8-S36BS LL8-S36BS 1-11 2.33 2.00 1.75
      11/4 10-S41* LL10-S41 11/4-111/2 2.44 2.50 2.00
      11/4 10-S41BS* 11/4-11 2.51 2.50 2.00
      11/2 12-S46* LL12-S46 11/2-111/2 2.88 3.13 2.63
      11/2 12-S46BS* LL12-S46BS 11/2-11 2.88 3.13 2.63
      2 16-S51* LL16-S51 2-111/2 3.09 3.75 3.00
      2 16-S51BS* LL16-S51BS 2-11 3.30 3.75 3.00
      21/2 20-S56* 21/2-8 3.44 4.50 3.50
      * With Steel Sleeve

      Hose Stem Connections

      Body Part Number Dimensions
      Size Brass Stainless Hose I.D. A B

      1/8 1-S12 LL1-S12 3/16" 1.41 0.69 1/8 1-S17 LL1-S17 1/4" 1.41 0.69 1/4 2-S17 LL2-S17 1/4" 2.10 0.94 3/8 3-S22 LL3-S22 3/8" 2.09 1.13 1/2 4-S27 LL4-S27 1/2" 2.19 1.31 3/4 6-S32 LL6-S32 3/4" 3.19 1.69 1 8-S37 LL8-S37 1" 3.32 2.00

      How to build a socket part number with options:

      Notes: 1) The Sleeve Lock device prevents accidental disconnection.
      2) Series ST couplings are designed for use with elastomer seals. Te.on is not an elastomer. It is rigid and not resilient. Couplings with Te.on seals may leak and/or be dif.cult to connect. Force to connect may be reduced by heating connected couplings in hot water; then, cooling before disconnecting. Te.on seals are available for Series 1-ST through 8-ST.
      3) The 146 seal option may be speci.ed for fuels and hydraulic .uids that cause standard Buna-N seals to swell escessively.
      4) Some part numbers may be subject to minimum order quantities.
      5) Some options may be available only by special quotation. Consult your Hansen distributor.

      Example: 3-S21 - SL - 143

      Seal Material:
      115 = Te.on2
      118 = Neoprene
      143 = Viton
      146 = Buna-N3
      192 = EPDM

      Standard Part Number
      from Part Number Tables

      SL = Sleeve Lock1

      All dimensions in inches.

      Series ST Straight-Through

      Plugs

      Male End Connections

      Body Part Number Thread Size Dimensions
      Size Brass Steel Stainless NPTF BSPP C D Hex

      1/8 B1-T10 1-T10 LL1-T10 1/8-27 1.09 0.51 0.44
      1/8 B1-T10BS 1/8-28 0.89 0.65 0.56
      1/8 B1-T15 1-T15 1/4-18 1.25 0.65 0.56
      1/4 B2-T15 2-T15 LL2-T15 1/4-18 1.61 0.65 0.56
      1/4 HL2-T15* 1/4-18 1.61 0.65 0.56
      1/4 B2-T15BS 2-T15BS LL2-T15BS 1/4-19 1.35 0.87 0.75
      3/8 B3-T20 3-T20 LL3-T20 3/8-18 1.69 0.79 0.69
      3/8 HL3-T20* 3/8-18 1.69 0.79 0.69
      3/8 B3-T20BS 3-T20BS LL3-T20BS 3/8-19 1.50 1.01 0.88
      1/2 B4-T25 4-T25 LL4-T25 1/2-14 2.03 1.01 0.88
      1/2 B4-T25BS 4-T25BS LL4-T25BS 1/2-14 1.77 1.15 1.00
      3/4 B6-T30 6-T30 LL6-T30 3/4-14 2.25 1.23 1.06
      3/4 B6-T30BS LL6-T30BS 3/4-14 2.00 1.44 1.25
      1 B8-T35 8-T35 LL8-T35 1-111/2 2.53 1.59 1.38
      1 B8-T35BS 1-11 2.30 2.02 1.75
      11/4 B10-T40 10-T40 LL10-T40 11/4-111/2 2.72 2.02 1.75
      11/4 B10-T40BS 11/4-11 2.50 2.31 2.00
      11/2 B12-T45 12-T45 11/2-111/2 3.31 2.60 2.25
      11/2 B12-T45BS 11/2-11 3.06 2.60 2.25
      2 B16-T50 16-T50 LL16-T50 2-111/2 3.50 3.18 2.75
      2 LL16-T50BS 2-11 3.50 3.18 2.75
      21/2 B20-T55 21/2-8 3.97 3.75 3.25
      *High impulse heat treated 416 stainless steel

      Female End Connections

      Body Part Number Thread Size Dimensions
      Size Brass Steel Stainless NPTF BSPP C D Hex

      1/8 B1-T11 1-T11 LL1-T11 1/8-27 1.00 0.58 0.50
      1/8 B1-T11BS LL1-T11BS 1/8-28 0.97 0.65 0.56
      1/4 B2-T16 2-T16 LL2-T16 1/4-18 1.50 0.79 0.69
      1/4 HL2-T16* 1/4-18 1.50 0.79 0.69
      1/4 B2-T16BS 2-T16BS LL2-T16BS 1/4-19 1.45 0.87 0.75
      3/8 B3-T21 3-T21 LL3-T21 3/8-18 1.63 0.94 0.81
      3/8 HL3-T21* 3/8-18 1.63 0.94 0.81
      3/8 B3-T21BS 3-T21BS LL3-T21BS 3/8-19 1.63 1.01 0.88
      1/2 B4-T26 4-T26 LL4-T26 1/2-14 1.94 1.15 1.00
      1/2 B4-T26BS 4-T26BS LL4-T26BS 1/2-14 1.92 1.23 1.06
      3/4 B6-T31 6-T31 LL6-T31 3/4-14 2.06 1.37 1.19
      3/4 B6-T31BS LL6-T31BS 3/4-14 2.01 1.52 1.31
      1 B8-T36 8-T36 LL8-T36 1-111/2 2.21 1.80 1.56
      1 B8-T36BS 8-T36BS LL8-T36BS 1-11 2.23 1.80 1.56
      11/4 B10-T41 10-T41 LL10-T41 11/4-111/2 2.34 2.31 2.00
      11/4 B10-T41BS 11/4-11 2.44 2.31 2.00
      11/2 B12-T46 12-T46 LL12-T46 11/2-111/2 2.88 2.60 2.25
      11/2 B12-T46BS 11/2-11 2.88 2.60 2.25
      2 B16-T51 16-T51 2-111/2 3.03 3.18 2.75
      2 B16-T51BS 2-11 3.25 3.18 2.75
      21/2 B20-T56 20-T56 21/2-8 3.37 3.75 3.25
      *High impulse heat treated 416 stainless steel

      Hose Stem Connections

      Body Part Number Dimensions
      Size Brass Steel Stainless Hose I.D. C D

      1/8 B1-T12 LL1-T12 3/16" 1.28 0.44
      1/8 B1-T17 LL1-T17 1/4" 1.28 0.44
      1/4 B2-T17 2-T17 LL2-T17 1/4" 1.93 0.56
      3/8 B3-T22 3-T22 LL3-T22 3/8" 2.09 0.69
      1/2 B4-T27 4-T27 LL4-T27 1/2" 2.17 0.88
      3/4 B6-T32 6-T32 LL6-T32 3/4" 3.17 1.19
      1 B8-T37 8-T37 1" 3.28 1.50

      Any plug will connect with any socket in the same series (same body size)

      All dimensions in inches.

      Series P2-ST & P3-ST

       

      Series P-2ST and P3-ST cou-plings are designed for use with medical equipment. They can also be used in a variety of low pressure .uid transfer applica-tions.
      Features
      . Interchange with 2-ST and 3-ST
      . Excellent chemical resistance
      . Light weight
      . Low cost
      Standard Materials
      . Polypropylene construction
      . Buna-N (Nitrile) seals

      SOCKETS

      Hose Dimensions
      Series Part Number I.D. A B
      P2-ST P2-STS-25H 1/4" 2.07 1.12
      Each P2-ST socket uses one Part No. 902-7 o-ring.
      P3-ST P3-STS-37H 3/8" 2.61 1.37
      Each P3-ST socket uses one Part No. 902-10-199 o-ring.

       

      PLUGS

      Dimensions
      Series Part Number Thread Size C D HEX
      P2-ST P2-STP-25M 1/4-18 NPTF 1.56 0.65 0.56
      P3-ST P3-STP-25M 1/4-18 NPTF 1.69 0.79 0.69
      P3-ST P3-STP-37M 3/8-18 NPTF 1.69 0.79 0.69

      Rated Pressure
      Temperature* PSI BAR
      75 110 8
      200 30 2

      Hose Dimensions
      Series Part Number I.D. C D
      P3-ST P3-STP-37H 3/8" 2.16 0.79

      *235F maximum sterilization temperature

      Series GH Garden Hose

       

       

      Series GH couplings are designed for water service where hoses are connected and disconnected frequently. They are available with garden hose threads and 3/4" pipe threads. Sockets are available without valves for maximum .ow and with valves for convenience of operation.
      Features
      . Durable brass construction
      . Ball lock
      . High quality Buna-N seals
      . Straight-through or one-way shut-off
      Standard Materials
      . Brass plug and socket bodies
      . Nickel plated brass sleeve
      . Stainless steel balls and
      springs
      . Buna-N o-ring and washer
      . Plastic (acetal) valve

       

      SOCKETS

      Female Dimensions
      Part No. Hose Thread A B
      GHS-12 Non-valved 3/4-111/2 1.19 1.19
      GHS-12-V Valved 3/4-111/2 1.19 1.19

      Female Dimensions
      Part No. Pipe Thread A B HEX
      8-GHS-75FS Non-valved 3/4-14 NPTF 1.18 1.25 1.13
      8-GHS-75FS-V Valved 3/4-14 NPTF 1.18 1.25 1.13

      PLUGS

      Male Dimensions
      Part No. Hose Thread C D
      GHP-11 3/4-111/2 1.30 1.06

      Rated Pressure
      PSI BAR
      200 14

      Male Dimensions
      Part No. Pipe Thread C D HEX
      8-GHP-75M 3/4-14 NPTF 1.66 1.18 1.06

      Series FLO-TEMP 200/300/500

       

      Flo-Temp couplings provide the .ow needed to cool or heat injec-tion molds and die casting dies. Sockets are available non-valved for maximum .ow, and valved to prevent .uid loss when discon-nected. Flo-Temp couplings can be used with water-glycol, hot water and hot oil. Body sizes are
      1/4", 3/8" and 1/2".
      Features
      . Non-valved straight-through models for maximum .ow
      . Valved sockets for automatic shut-off when line is disconnected
      . Sockets with straight, 90 and 45 hose stems and without hose stem
      . Brass plugs with male pipe thread for recessed mounting to avoid damage to plugs when molds are being changed or stored
      Standard Materials
      . Brass socket construction
      . Stainless steel springs and locking balls
      . Viton seals (-30F to +450F)
      . Brass plugs

      Rated Pressure
      Series PSI BAR
      200/300/500 200 14

      FLOW RATE, gpm
      (Water)

      Replacement Parts
      Part Number
      Description Series 200 Series 300 Series 500
      Seal WFT-200-228 WFT-300-228 WFT-500-228
      Valve VFT-200 VFT-300 VFT-500
      Valve O-Ring 902-3-143 903-8-143 914-3-143
      Valve Spring VSFT-200 VS-3000 VSFT-500

      Series FLO-TEMP 200/300/500

       

      SOCKETS

      Without Hose Stem

      90 Hose Stem

       

      Straight Hose Stem

      45 Hose Stem

      *Part numbers with HP suf.x have push-on hose barb. All other FTS part numbers have standard hose barb.

       

      PLUGS

      Female Pipe Thread

      Male Pipe Thread

       

       

       

       

       

      ACCESSORIES

      ACCESSORIES

      61

      64

      71

      72

      HANSEN COUPLINGS

      HANSEN COUPLINGS

      HANSEN COUPLINGS

      HANSEN COUPLINGS

       

      GAS COUPLINGS

      61

      Series Gas-Mate

       

      3/8" to 1" Gas-Mate 11/4" Gas-Mate

       

       

      Gas-Mate couplings are one-way shut-off safety couplings designed for use with various fuel gases. Body sizes are 3/8", 1/2", 3/4", 1" and 1.".
      Features
      . Connect and disconnect without using wrenches
      . Automatic shut-off when plug is removed from socket
      . In case of .re, heat-sensitive plug allows socket valve to
      close, stopping gas .ow
      . Push-to-connect (1." only)
      For connection of gas cooking
      appliances and other gas-.red
      devices.
      CSA* design certi.ed, in both the
      United States and Canada, for
      natural gas, manufactured gas,
      liqui.ed petroleum and LP gas-air
      mixtures at pressures not in excess
      of 1/2 psig (3.5 kPa)
      *CANADIAN STANDARDS ASSOCIATION
      Complies with the requirements of
      ANSI Z21.41 & CSA 6.9.
      Standard Materials
      . Brass construction
      . Stainless steel locking balls
      . Viton socket o-ring
      . Valve actuator soldered to plug with low melting temperature alloy.
      Accessories
      . Dust caps and dust plugs
      (See page 68.)



      GAS
      COUPLINGS

      Capacities
      Body Socket Plug Capacity* Socket O-Ring
      Size Part No. Part No. BTU/hr Part No.
      3/8" 100-006 100-506 60,000 914-3-143M
      1/2" 100-008 100-508 90,000 902-14-143M
      3/4" 100-010 100-510 245,000 902-18-143M
      1" 100-012 100-512 310,000 902-23-143M
      1." GMS1250FH GMP1250F 500,000 914-26-143M
      * Capacity is based on natural gas having a speci.c gravity of 0.64 and a heat capacity of 1,000 BTU per cubic foot. Inlet pressure is 12 inches water column and the pressure drop is 0.3 inch water column.

      Sockets Plugs

      Thread Dimensions
      Body Size Across
      Size Part No. NPTF A B Flats
      3/8" 100-006 3/8-18 2.44 1.13 1.00
      1/2" 100-008 1/2-14 2.84 1.38 1.13
      3/4" 100-010 3/4-14 3.17 1.75 1.50
      1" 100-012 1-11. 3.94 2.13 1.75

      Thread
      Body Size Dimensions
      Size Part No. NPTF C D HEX
      3/8" 100-506 3/8-18 1.59 0.94 0.81
      1/2" 100-508 1/2-14 1.94 1.16 1.00
      3/4" 100-510 3/4-14 2.06 1.52 1.31
      1" 100-512 1-11. 2.47 1.73 1.50

       

      Thread
      Body Size Dimensions
      Size Part No. NPTF C D HEX
      1." GMP1250F 1.-11. 2.44 2.16 1.88

      Thread Dimensions
      Body Size
      Size Part No. NPTF A B Hex
      1." GMS1250FH 1.-11. 4.15 2.28 2.00

      62

      HANSEN COUPLINGS

       

      63

      HANSEN COUPLINGS

      Series FS Flow Sensor

       

      Series FS Flow Sensors are designed to protect personnel and property in case of hose failure in compliance with Federal Safety Regulations. Flow Sensors are intended for use with compressed air.
      Features
      . Automatically shuts off air .ow to ruptured hose
      . Reduces risk of injury or damage from hose whip
      . Automatically resets after failure correction
      . 250 psig pressure rating (all sizes)
      . Low pressure drop
      . Operates in any orientation
      . Compact design, economical, tamper-resistant
      Standard Materials
      . Brass body
      . Acetal valve (1/4" - 1")
      . Brass valve (1.")
      . Stainless steel valve spring

      All Flow Sensors have a pressure drop of approximately 2 psid at 80% of shut-off .ow.

      Flow Data - The graph below left indicates the minimum inlet pressure for various hose lengths. Each Flow Sensor has a shut-off .ow rating dependent upon inlet pressure. The length of hose and .tting size are critical in the proper operation of the valve. For example, with the B8-FS-50F-8 Flow Sensor, the hose I.D. must be 1/2" using only 1/2" pipe thread end .ttings. Thirty feet of hose requires at least 20 psig inlet pressure; .fty feet of hose requires at least 28 psig inlet pressure; and seventy-.ve feet of hose requires at least 36 psig inlet pressure. Inlet pressures lower than those indicated on the curves below will not guarantee protection in case of hose failure. Valve shut-off occurs only when .ow exceeds the .ow rating for the inlet pressure.
      If hose lengths greater than 75 feet are required, a 1/2" size or larger Flow Sensor must be installed on the inlet end of each 75-foot section, and a correspondingly higher inlet pressure must be supplied for proper operation of the Flow Sensor to assure safety.

       

      All dimensions in inches.

      In-Line Check Valves

       

      Series RA 4000 in-line check valves are designed for use in hydraulic circuits. They are rugged and reliable, offer low pressure drop and have elastomer valve seals for leak-free operation. Available sizes are 1/4" to 1".

      Features
      . One-piece zinc plated steel body
      . One-piece high strength steel valve provides excellent reliability under severe operating conditions
      . The valve has a captive nitrile (Buna-N) seal, assuring no leakage at low and high pressures
      . Low pressure drop versus .ow
      . Female NPTF end connections
      . Cracking pressure: 7 psi (0.5 bar)

      Size Thread Dimensions *Rated Pressure
      (inch) Part No. NPTF A Hex PSI BAR
      1/4 RA 04210 00 1/4-18 1.97 0.75 10,150 700
      3/8 RA 04220 00 3/8-18 2.36 0.91 10,150 700
      1/2 RA 04230 00 1/2-14 2.76 1.06 7,250 500
      3/4 RA 04240 00 3/4-14 3.39 1.38 7,250 500
      1 RA 04250 00 1-11. 3.94 1.62 7,250 500
      *Pressure ratings are given for valves in an open position with a constant .ow.

      Fittings

      Hose Clamps (Brass) . Compression Type, Reusable

      Female Pipe Thread (FPT)

      Male Pipe Thread (MPT)

      1/8-27 NPTF
      Hose Part No.
      I.D. O.D. MPT FPT
      Series A 3/16" 7/16" 1A0
      3/16" 1/2" 1A3
      Series B 1/4" 15/32" 1B1
      1/4" 1/2" 1B3
      1/4" 9/16" 1B5
      1/4" 5/8" 1B7
      1/4" 3/4" 1B11

      3/4-14 NPTF
      Hose Part No.
      I.D. O.D. MPT FPT
      Series P 1/2" 13/16" 8P13 1/2" 7/8" 8P15 1/2" 15/16" 8P17 1/2" 1" 8P19
      Series R 3/4" 11/8" 8R23 3/4" 13/16" 8R25 3/4" 1." 8R27

      3/8-18 NPTF
      Hose Part No.
      I.D. O.D. MPT FPT
      Series B 1/4" 15/32" 4B1
      1/4" 1/2" 4B3
      1/4" 9/16" 4B5
      1/4" 5/8" 4B7
      Series C 5/16" 5/8" 4C7 5/16" 11/16" 4C9
      Series D 3/8" 9/16" 4D5 5D5 3/8" 5/8" 4D7 5D7 3/8" 11/16" 4D9 5D9 3/8" 3/4" 4D11 5D11 3/8" 13/16" 4D13 5D13 3/8" 7/8" 4D15 5D15
      Series P 1/2" 13/16" 4P13 1/2" 7/8" 4P15 1/2" 15/16" 4P17 1/2" 1" 4P19

      1-11. NPTF
      Hose Part No.
      I.D. O.D. MPT FPT
      Series R 3/4" 11/8" 10R23 3/4" 13/16" 10R25 3/4" 1." 10R27

      1/4-18 NPTF
      Hose Part No.
      I.D. O.D. MPT FPT
      Series A 3/16" 7/16" 2A0
      3/16" 1/2" 2A3
      Series B 1/4" 15/32" 2B1 3B1
      1/4" 1/2" 2B3 3B3
      1/4" 9/16" 2B5 3B5
      1/4" 5/8" 2B7 3B7
      1/4" 11/16" 2B9 3B9
      Series C 5/16" 9/16" 2C5 C
      5/16" 5/8" 2C7 3C7
      5/16" 11/16" 2C9 C
      Series D 3/8" 9/16" 2D5 3D5
      3/8" 5/8" 2D7 3D7
      3/8" 11/16" 2D9 3D9
      3/8" 3/4" 2D11 3D11
      3/8" 13/16" 2D13 3D13
      3/8" 7/8" 2D15 3D15
      Series P 1/2" 13/16" 2P13
      1/2" 7/8" 2P15
      1/2" 15/16" 2P17
      1/2" 1" 2P19

      1/2-14 NPTF
      Hose Part No.
      I.D. O.D. MPT FPT
      Series P 1/2" 13/16" 6P13 7P13 1/2" 7/8" 6P15 7P15 1/2" 15/16" 6P17 7P17 1/2" 1" 6P19 7P19
      Series R 3/4" 11/8" 6R23 3/4" 13/16" 6R25 3/4" 1." 6R27

       

      Swivel Nut Hose Clamps (Brass) . Compression Type, Reusable

      With Brass Male Swivel Insert C External Seat (inverted .are) for use with paint spray and oxygen .ttings, etc. (Will accept 37 or 45 .are.). The Swivel Nut Hose Clamp is similar to the standard hose clamp, but includes a swivel nut.

      With Steel Female Swivel Insert, 37 Female Flare, for use with .ared tube .ttings.

      9/16-18 Straight Thread
      Hose Part
      I.D. O.D. No.
      Series A 3/16" 7/16" 4LA0* 3/16" 7/16" 4RA0 3/16" 1/2" 4LA3* 3/16" 1/2" 4RA3 Series B 1/4" 15/32" 4RB1 1/4" 1/2" 4LB3* 1/4" 1/2" 4RB3 1/4" 9/16" 4LB5* 1/4" 9/16" 4RB5 1/4" 5/8" 4RB7 Series D 3/8" 5/8" 4RD7 3/8" 11/16" 4RD9 3/8" 3/4" 4RD11
      * Left-hand thread for acetylene service

      7/16-20 Straight Thread
      Hose Part
      I.D. O.D. No.
      Series B 1/4" 15/32" 720B1
      1/4" 1/2" 720B3
      1/4" 9/16" 720B5
      1/4" 5/8" 720B7

      5/8-18 Straight Thread
      Hose Part
      I.D. O.D. No.
      Series D 3/8" 5/8" 2FD7
      3/8" 11/16" 2FD9
      3/8" 3/4" 2FD11

      1/4-18 NPSM Straight Thread
      Hose Part
      I.D. O.D. No.
      Series B 1/4" 15/32" 5RB1 1/4" 1/2" 5RB3 1/4" 9/16" 5RB5
      1/4" 5/8" 5RB7 Series C 5/16" 5/8" 5RC7 Series D 3/8" 5/8" 5RD7 3/8" 11/16" 5RD9 3/8" 3/4" 5RD11

      3/4-16 Straight Thread
      Hose Part
      I.D. O.D. No.
      Series P 1/2" 13/16" 1216P13
      1/2" 7/8" 1216P15

      9/16-18 Straight Thread
      Hose Part
      I.D. O.D. No.
      Series D 3/8" 5/8" 4FD7
      3/8" 11/16" 4FD9
      3/8" 3/4" 4FD11
      3/8" 7/8" 4FD15

       

      Fittings

      Unions (Brass)

      Adapters

      Hose Stems

       

       

      Part No. H25MHU Part No. HHU25M
      1/4" Male Pipe Thread 1/4" Male Pipe Thread Union Half consists of Union Half H25HMU01 body and 902-8 o-ring.

      Oxygen Adapter (Brass)
      Part No. Thread Size
      9-MBR 1/4-18 NPTF x 9/16-18 Right Hand

      Hose Stem-to-Male Pipe Thread
      Hose Thread Part No.
      I.D. NPTF Brass Stainless
      3/16" 1/8-27 SN16 LLS16
      1/4" 1/8-27 SN17
      3/8" 1/8-27 SN18
      3/16" 1/4-18 S19
      1/4" 1/4-18 S20 LLS20
      5/16" 1/4-18 S205
      3/8" 1/4-18 S21
      1/2" 1/4-18 S22
      1/4" 3/8-18 S23
      3/8" 3/8-18 S24 LLS24
      1/2" 3/8-18 S25
      1/2" 1/2-14 S26 LLS26
      3/4" 3/4-14 LLS30
      1" 1-111/2 LLS35

       

      Part No. H25HHU Part No. HHU25F
      1/4" Hose Stem 1/4" Female Pipe
      Union Half consists Thread Union Half
      of H25HHU01 stem,
      902-8 o-ring and HUSN1 sleeve

      Pipe-to-Pipe Adapter (Brass)
      Part No. Thread Size
      18-MAM 1/8-27 NPTF x 1/4-18 NPTF 19-MBM 1/4-18 NPTF x 1/4-18 NPTF
      20-MBM 1/4-18 NPTF x 3/8-18 NPTF

       

      Splicers (Brass)

       

      Part No. H37HHU Part No. HHU37H
      3/8" Hose Stem 3/8" Hose Stem
      Union Half consists Union Half
      of H37HHU01 stem,
      902-8 o-ring and
      HUSN1 sleeve
      Any union half shown on the left can be used with any union half shown on the right.

      Flare-to-Pipe Adapter (Stainless)
      Part No. Thread Size
      A-402 7/16-20 (1/4" 45 Flare) x 1/4-18 NPTF

      Hose Stem-to-Hose Stem
      Hose I.D. Part No.
      3/16" HS-30
      1/4" HS-31
      5/16" HS-32
      3/8" HS-33
      1/2" HS-34

      Flare-to-Flare Adapter (Stainless)
      Part No. Thread Size
      A-394 7/16-20 (1/4" 45 Flare) Both Ends A-375 5/8-18 (3/8" 45 Flare) Both Ends

      Hose Clamp-to-Hose Clamp
      Hose I.D. Hose O.D. Part No.
      1/4" 15/32" HSC-B1
      1/4" 1/2" HSC-B3
      1/4" 5/8" HSC-B7
      5/16" 5/8" HSC-C7
      5/16" 11/16" HSC-C9
      3/8" 9/16" HSC-D5
      3/8" 5/8" HSC-D7
      3/8" 11/16" HSC-D9
      3/8" 3/4" HSC-D11

      All stainless steel .ttings listed on this page are machined from Type 303 stainless steel bar stock.

      Dust Caps and Dust Plugs

      The use of dust caps and dust plugs keeps mating surfaces of disconnected couplings clean, and extends the useful life of seals and mechanical components. Plug dust caps prevent damage to plugs that could make a coupling unusable. All dust caps and plugs offered for Hansen couplings are listed on this page and the next.

      HK-Style Dust Caps and Plugs

      Vinyl Plug Dust Cap

      Coupling
      Plug Dust Cap Part No.
      Socket Dust Plug Part No.

      Type
      Series
      Metal
      Vinyl
      Metal
      Vinyl

      1-HK
      PDC-1-HK*
      P-PDC-1-HK
      SDC-1-HK*
      P-SDC-1-HK

      2-HK
      PDC-2-HK*
      P-PDC-2-HK
      SDC-2-HK*
      P-SDC-2-HK

      3-HK
      PDC-3-HK*
      P-PDC-3-HK
      SDC-3-HK*
      P-SDC-3-HK

      4-HK
      PDC-4-HK**
      P-PDC-4-HK
      SDC-4-HK**
      P-SDC-4-HK

      6-HK
      PDC-6-HK**
      P-PDC-6-HK
      SDC-6-HK**
      P-SDC-6-HK

      8-HK
      PDC-8-HK**
      P-PDC-8-HK
      SDC-8-HK**
      P-SDC-8-HK

      12-HK
      PDC-12-HK**

      SDC-12-HK**


      20-HK
      PDC- 20-HK**

      SDC-20-HK**


      UP10

      P-PDC-2-HK

      P-SDC-2-HK

      2-HKIG

      P-PDC-2-HK



      2-HKIL

      P-PDC-2-HK



      3000
      PDC-3000*

      SDC-3000*
      P-SDC-1-HK

      4000



      P-SDC-2-HK

      5000

      P-PDC-2-HK



      6000

      P-PDC-3-HK



      1000



      P-SDC-1-HK

      400



      P-SDC-2-HK

      100

      P-PDC-1-HK

      P-SDC-1-HK

      600

      P-PDC-1-HK

      P-SDC-1-HK

      700

      P-PDC-1-HK

      P-SDC-1-HK

      2-RL

      P-PDC-1-HK

      P-SDC-1-HK

      3-RL

      P-PDC-2-HK

      P-SDC-2-HK

      2-ST



      P-SDC-1-HK

      3-ST



      P-SDC-2-HK

      6-ST

      P-PDC-4-HK

      P-SDC-4-HK

      8-ST

      P-PDC-6-HK



      10-ST

      P-PDC-8-HK



      3/8
      PDC-2-HK*
      P-PDC-2-HK
      SDC-2-HK*
      P-SDC-2-HK

      1/2
      PDC-3-HK*
      P-PDC-3-HK
      SDC-3-HK*
      P-SDC-3-HK

      3/4
      PDC-4-HK**
      P-PDC-4-HK
      SDC-4-HK**
      P-SDC-4-HK

      1
      PDC-6-HK**
      P-PDC-6-HK
      SDC-6-HK**
      P-SDC-6-HK

       

      Vinyl Socket Dust Plug

      Gas-Mate Straight- One-Way Two-Way
      Through

      Metal Plug Dust Cap

      Metal Socket Dust Plug

      *Brass **Aluminum

      Dust Caps and Dust Plugs

      Series HA 15000 ISO 7241-1 Series A

       

      Series QA 29000 Flat Face

       

       

      Series 96 Wing Nut

       

      Series WA 56000 10,000 psi Thread-to-Connect

       

       

      Series WA 10000 Refrigerant and Liquid Transfer

       

      Flex-Air Fittings

       

      The Flex-Air Fitting is designed to rotate 360 at up to a 75 angle. The Flex-Air Fitting helps to alleviate Carpal Tunnel Syndrome and other stress related injuries in the workplace.

      Features
      . Unique design provides free 360 rotation with up to a 75 angle of rotation in any direction
      . Many styles and sizes available
      . 145 psig (10 Bar) pressure rating (all models)
      Bene.ts
      . Provides .exibility of tool position to help alleviate Carpal Tunnel Syndrome and back stress resulting in fewer lost-time injuries
      . Minimizes paint damage
      . Prevents kinking of air supply hose
      Applications
      . Assembly air lines in automotive, electronic and other industries
      . Mechanical joints for robotics
      . Vibration isolation
      . Commercial and residential construction
      Standard Materials
      . Integrated steel/polyurethane construction
      . Steel balls
      . Buna-N (Nitrile) seals
      . Thread sealant standard on male NPTs


      Part Number Description Inside Dia.
      FA25F-25M 1/4" NPT Female x 1/4" NPT Male 0.2" (5 mm) FA25F-37M 1/4" NPT Female x 3/8" NPT Male 0.3" (7.5 mm)
      FA37F-37M 3/8" NPT Female x 3/8" NPT Male 0.3" (7.5 mm)

      Part Number Description Inside Dia.
      FA25M-25M 1/4" NPT Male x 1/4" NPT Male 0.2" (5 mm) FA37M-37M 3/8" NPT Female x 3/8" NPT Male 0.3" (7.5 mm)

      Part Number Description Inside Dia.
      FA25P-25M 1/4" Industrial Interchange x 1/4" NPT Male 0.2" (5 mm) FA37P-25M 3/8" Industrial Interchange x 1/4" NPT Male 0.3" (7.5 mm)

      Part Number Description Inside Dia.
      FA25AR-25M ARO210 Interchange x 1/4" NPT Male 0.2" (5 mm)

      Part Number Description Inside Dia.
      FA25LI-25M Lincoln Interchange x 1/4" NPT Male 0.2" (5 mm)

      Part Number Description Inside Dia.
      FA37H-37M 3/8" Barb x 3/8" NPT Male 0.3" (7.5 mm)

      Part Number Description Inside Dia.
      FA3RL-37M 3/8" RL Plug x 3/8" NPT Male 0.3" (7.5 mm)

      Elastomer Selection Guide

      Select seals compatible with the service intended for the couplings. Allowance must be made for the kind of .uid to be conveyed and its temperature. Chemically active .uids will destroy some seal materials. Certain seals withstand high temperatures, whereas others cannot. Use this elastomer selection guide to .nd the appropriate seal. NOTE: Elastomer or seal material listed as Standard is furnished in most Hansen couplings. Elastomers designated as -118, -146, -192, etc., are available as optional seal material for some couplings. Other seal materials available upon request to suit requirements. Consult a Hansen Distributor.
      NOTE: The following information is accurate to the best of our knowledge; however, since service conditions vary so widely, it is intended as a guide only and is not a guarantee.

      Seal Information

      Dash No. Compound
      -*** Buna-N C 90 Durometer
      -115 Te.on
      -118 Neoprene
      -143 Viton
      -146 Buna-N C 70 Durometer
      -192* EPDM
      -235. Kalrez
      -236* EPDM
      *** No Dash Number required for
      standard seal material
      * -192 and -236 compounds are not compatible
      with mineral-based greases or oils
      .Kalrez seals available by special quotation

      ELASTOMER SELECTION GUIDE

      FLUID HANSEN ELASTOMER
      Air (to 200 F) ......Standard
      Air (above 200F) -143
      Acetone ...............-192*
      Acetylene .............Standard
      Alcohol, Ethyl .......-192*
      Alcohol, Methyl ....Standard
      Alkalies ................-192*
      Ammonia, Anhydrous ...........................................................Standard
      Ammonium Hydroxide ..........................................................-192*
      Aroclor .................-143
      Brake Fluid, Non-Petroleum Based ......................................-192*
      Butane .................-146
      Carbon Dioxide ....Standard
      Carbon Tetrachloride ............................................................-143
      Cellulube ..............-192*
      Creosote ..............Standard
      Diesel Fuel ...........-146
      Diester Lubricants ................................................................-143
      Ethane .................-146
      Ethanol ................-192*
      Ethylene Glycol ....-192*
      Freon (most varieties) ...........................................................-118
      Gasoline, Aromatic & Non-Aromatic .....................................-143
      Glycerin ...............Standard
      Helium .................Standard
      Heptane ...............-146
      Hexane ................-146
      Houghto-Safe Series 200, 600, 5000 ...................................Standard
      Houghto-Safe Series 1000 ...................................................-192*
      Hydraulic Fluid, Petroleum-based with .................................Standard
      Aniline Point above 160 F
      Hydrolube ............Standard
      Jet Fuel (to 250 F) ...............................................................-146
      Jet Fuel (above 250 F) ........................................................-143
      FLUID HANSEN ELASTOMER
      Kerosene .............-146
      Lindol ...................-192*
      L.P. Gases ............Standard
      Methane ...............-146
      Methanol ..............Standard
      Methyl Ethyl Ketone ..............................................................-192*
      Methyl Iso-Butyl Ketone ........................................................-192*
      MIL-H-5606A .......Standard
      Mineral Spirits ......-146
      Natural Gas .........Standard
      Nitrogen ...............Standard
      Octane .................-143
      Oils, including: Animal, Mineral with Aniline ........................Standard
      Point above 160F
      and Non-Food Service Vegetable
      OS45 & OS45-1 ...-143
      Oxygen ................Service Conditions
      Dictate Elastomer Selection
      Pentane ...............-146
      Perchloroethylene -143
      Propane ...............Standard
      Propylene ............-143
      Pydraul ................-143
      Steam (to 350 F) -192*
      Steam (above 350 F) ..........................................................-236*
      Stoddard Solvent .-146
      Toluene ................-143
      Transmission Oil, Automotive ...............................................Standard
      Trichloroethylene .-143
      Turpentine ............Standard
      Versilube F-50 .....-192*
      Water (to 180F) ..Standard
      Water (above 180F) ............................................................-192*

      * -192 and -236 compounds are not compatible with mineral-based greases or oils

      Alphanumeric Part Number
      Index

      Part Number Page

      Part Number Page

      Part Number Page

      Part Number Page

      00A .......................................28
      01A .......................................28
      02A .......................................28
      03A .......................................28
      04-R ......................................28
      05-R ......................................28
      07A .......................................28
      08A .......................................28
      09A .......................................28
      10....................................11, 15
      100........................................26
      1000......................................11
      100-006 ................................62
      100-008 ................................62
      100-010 ................................62
      100-012 ................................62
      100-63 ..................................26
      1000-43 ................................11
      1000-63 ................................11
      100-506 ................................62
      100-508 ................................62
      100-510 ................................62
      100-512 ................................62
      101........................................26
      102........................................26
      103........................................26
      104........................................26
      105........................................26
      10-43 ....................................11
      10C .................................11, 15
      10FFP37 ...............................43
      10FFP50 ...............................43
      10FFS37 ...............................43
      10FFS50 ...............................43
      10G .................................11, 15
      10-H41 ..................................38
      10-H41BS .............................38
      10-K41 ..................................38
      10-K41BS .............................38
      10R23 ...................................66
      10R25 ...................................66
      10R27 ...................................66
      10-S41 ..................................56
      10-S41BS .............................56
      10-T40 ..................................57
      10-T41 ..................................57
      11....................................11, 15
      110........................................26
      1100......................................11
      111........................................26
      112........................................26
      11B .................................11, 15
      11G .................................11, 15
      12....................................11, 15
      1200......................................11
      1216P13 ...............................66
      1216P15 ...............................66
      12FFP106UN ........................43
      12FFP50 ...............................43
      12FFP75 ...............................43
      12FFS106UN ........................43
      12FFS50 ...............................43
      12FFS75 ...............................43
      12G .................................11, 15
      12-H41 ..................................38
      12-H41BS .............................38
      12-H41C ...............................38
      12-H46 ..................................38
      12-H46BS .............................38
      12-H46C ...............................38
      12-K41 ..................................38
      12-K41BS .............................38
      12-K41C ...............................38
      12-K46 ..................................38
      12-K46BS .............................38
      12-K46C ...............................38
      12-S46 ..................................56
      12-S46BS .............................56
      12-T45 ..................................57
      12-T46 ..................................57
      13....................................11, 15
      1300......................................11
      14....................................11, 15
      14G .................................11, 15
      15....................................11, 15
      16....................................11, 15
      1600......................................11
      1600P ...................................11
      16FFP50 ...............................43
      16FFP75 ...............................43
      16FFS50 ...............................43
      16FFS75 ...............................43
      16G .................................11, 15
      16P .................................11, 15
      16PG ..............................11, 15
      16-S51 ..................................56
      16-S51BS .............................56
      16-T50 ..................................57
      16-T51 ..................................57
      17....................................11, 15
      1700......................................11
      1700P ...................................11
      17G .................................11, 15
      17P .................................11, 15
      17PG ..............................11, 15
      18....................................11, 15
      180........................................24
      1800......................................11
      183........................................24
      185........................................24
      186........................................24
      187........................................24
      189........................................24
      18-MAM ....................28, 29, 67
      19FFP100 .............................43
      19FFP131UN ........................43
      19FFP75 ...............................43
      19FFS100 .............................43
      19FFS131UN ........................43
      19FFS75 ...............................43
      19-MBM ....................28, 29, 67
      1A0 .......................................66
      1A3 .......................................66
      1B1 .......................................66
      1B11 .....................................66
      1B3 .......................................66
      1B5 .......................................66
      1B7 .......................................66
      1G1 .......................................26
      1G10 .....................................26
      1G12 .....................................26
      1G2 .......................................26
      1G3 .......................................26
      1G5 .......................................26
      1-GB3 ...................................26
      1-GB7 ...................................26
      1-GD7 ...................................26
      1-GD9 ...................................26
      1-H11 ....................................36
      1-H4 ......................................36
      1-HRC-K ...............................37
      1-K11 ....................................36
      1-K4 ......................................36
      1-S10 ....................................56
      1-S10BS ...............................56
      1-S11 ....................................56
      1-S11BS ...............................56
      1-S12 ....................................56
      1-S17 ....................................56
      1-SA0 ....................................11
      1-SA3 ....................................11
      1-SB1 ....................................11
      1-SB3 ....................................11
      1-SB5 ....................................11
      1-SB7 ....................................11
      1-SC5 ...................................11
      1-SC7 ...................................11
      1-SC9 ...................................11
      1-SD11 .................................11
      1-SD5 ...................................11
      1-SD7 ...................................11
      1-SD9 ...................................11
      1-T10 ....................................57
      1-T11 ....................................57
      1-T15 ....................................57
      20AP-37F .............................21
      20AP-37M .............................21
      20-H51 ..................................38
      20-H51BS .............................38
      20-H51C ...............................38
      20-H56 ..................................38
      20-H56BS .............................38
      20-H56C ...............................38
      20-H61 ..................................38
      20-H61BS .............................38
      20-H61C ...............................38
      20-K51 ..................................38
      20-K51BS .............................38
      20-K51C ...............................38
      20-K56 ..................................38
      20-K56BS .............................38
      20-K56C ...............................38
      20-K61 ..................................38
      20-K61BS .............................38
      20-K61C ...............................38
      20-MBM ....................28, 29, 67
      20-S56 ..................................56
      20-T56 ..................................57
      21AP-25F .............................21
      21AP-25H .............................21
      21AP-25M .............................21
      21AP-37F .............................21
      21AP-37H .............................21
      21AP-37M .............................21
      22238....................................21
      24AP-25FBS .........................21
      24AP-25FG ...........................21
      24AP-25H .............................21
      24AP-25MBST ......................21
      24AP-25MG ..........................21
      24AP-31H .............................21
      24AP-37FBS .........................21
      24AP-37H .............................21
      24AP-37MBST ......................21
      24AP-50FBS .........................21
      24AP-50H .............................21
      24AP-50MBST ......................21
      25FFP125 .............................43
      25FFS125 .............................43
      2607......................................21
      2608......................................21
      2608B ...................................21
      2609......................................21
      2609B ...................................21
      2800......................................15
      28S-12F ................................24
      28S-25M ...............................24
      2900......................................15
      2A0 .......................................66
      2A3 .......................................66
      2B1 .......................................66
      2B3 .......................................66
      2B5 .......................................66
      2B7 .......................................66
      2B9 .......................................66
      2C5 .......................................66
      2C7 .......................................66
      2C9 .......................................66
      2DBP-25F .............................49
      2DBP-25FBS ........................49
      2DBS-25F .............................49
      2DBS-25FBS ........................49
      2D11 .....................................66
      2D13 .....................................66
      2D15 .....................................66
      2D5 .......................................66
      2D7 .......................................66
      2D9 .......................................66
      2FD11 ...................................66
      2FD7 .....................................66
      2FD9 .....................................66
      2-H16 ....................................36
      2-H16BS ...............................36
      2-H16C .................................36
      2-H6 ......................................36
      2-H6C ...................................36
      2-HIG10 ................................48
      2-HIG11 ................................48
      2-HIG15 ................................48
      2-HIG16 ................................48
      2-HIG20 ................................48
      2-HIG720 ..............................48
      2-HIG-LLRA720 ....................48
      2-HIL10 .................................48
      2-HIL11 .................................48
      2-HIL15 .................................48
      2-HIL16 .................................48
      2-HIL20 .................................48
      2-HIL720 ...............................48
      2-HIL-LLRA720 .....................48
      2-HRC-K ...............................37
      2-K16 ....................................36
      2-K16BS ...............................36
      2-K16C .................................36
      2-K16C-VB ...........................37
      2-K6 ......................................36
      2-K6C ...................................36
      2-KIG-F .................................48
      2-KIG-F15 .............................48
      2-KIG-F16 .............................48
      2-KIG-F20 .............................48
      2-KIG-F720 ...........................48
      2-KIL-F ..................................48
      2-KIL-F15 ..............................48
      2-KIL-F16 ..............................48
      2-KIL-F20 ..............................48
      2-KIL-F720 ............................48
      2-L10 ....................................31
      2-L11 ....................................31
      2-L15 ....................................31
      2-L15G ..................................31
      2-L16 ....................................31
      2-L16G ..................................31
      2-L17 ....................................31
      2-L185C5 ..............................31
      2-L185C7 ..............................31
      2-L185C9 ..............................31
      2-L18B1 ................................31
      2-L18B11 ..............................31
      2-L18B3 ................................31
      2-L18B5 ................................31
      2-L18B7 ................................31
      2-L18B9 ................................31
      2-L195 ..................................31
      2-L20 ....................................31
      2-L20G ..................................31
      2-L21 ....................................31
      2-L22 ....................................31
      2-L23D11 ..............................31
      2-L23D13 ..............................31
      2-L23D15 ..............................31
      2-L23D5 ................................31
      2-L23D7 ................................31
      2-L23D9 ................................31
      2-L25 ....................................31
      2-L26 ....................................31
      2-L27 ....................................31
      2-L28P13 ..............................31
      2-L28P15 ..............................31
      2P13 .....................................66
      2P15 .....................................66
      2P17 .....................................66
      2P19 .....................................66
      2-R10 ....................................31
      2-R11 ....................................31
      2-R15 ....................................31
      2-R16 ....................................31
      2-R17 ....................................31
      2-R185C5 .............................31
      2-R185C7 .............................31
      2-R185C9 .............................31
      2-R18B1 ...............................31
      2-R18B11 .............................31
      2-R18B3 ...............................31
      2-R18B5 ...............................31
      2-R18B7 ...............................31
      2-R18B9 ...............................31
      2-R195 ..................................31
      2-R20 ....................................31
      2-R21 ....................................31
      2-R22 ....................................31
      2-R23D11 .............................31
      2-R23D13 .............................31
      2-R23D15 .............................31
      2-R23D5 ...............................31
      2-R23D7 ...............................31
      2-R23D9 ...............................31
      2-R25 ....................................31
      2-R26 ....................................31
      2-R27 ....................................31
      2-R28P13 .............................31
      2-R28P15 .............................31
      2-S15 ....................................56
      2-S15BS ...............................56
      2-S16 ....................................56
      2-S16BS ...............................56
      2-S17 ....................................56
      2-T15 ....................................57
      2-T15BS ...............................57
      2-T16 ....................................57
      2-T16BS ...............................57
      2-T17 ....................................57
      3000......................................15
      3000-43 ................................15
      3000-63 ................................15
      30SVS-25F ...........................22
      30SVS-25M ..........................22
      3100......................................15
      31AP-25F .............................12
      31AP-25M .............................12
      31AP-37F .............................12
      31AP-37M .............................12
      3200......................................15
      3300......................................15
      3600......................................15
      3600P ...................................15
      3700......................................15
      3700P ...................................15
      38....................................12, 16
      3800......................................15
      3946......................................21
      3947......................................21
      3B1 .......................................66
      3B3 .......................................66
      3B5 .......................................66
      3B7 .......................................66
      3B9 .......................................66
      3C7 .......................................66
      3DBP-37F .............................49
      3DBP-37FBS ........................49
      3DBS-37F .............................49
      3DBS-37FBS ........................49
      3D11 .....................................66
      3D13 .....................................66
      3D15 .....................................66
      3D5 .......................................66
      3D7 .......................................66
      3D9 .......................................66
      3-H21 ....................................36
      3-H21BS ...............................36
      3-H21C .................................36
      3-H8 ......................................36
      3-H8C ...................................36
      3-HRC-K ...............................37
      3-K21 ....................................36
      3-K21BS ...............................36
      3-K21C .................................36
      3-K21C-VB ...........................37
      3-K21-VB ..............................37
      3-K8 ......................................36
      3-K8C ...................................36
      3-L10 ....................................32
      3-L15 ....................................32
      3-L15G ..................................32
      3-L16 ....................................32
      3-L16G ..................................32
      3-L17 ....................................32
      3-L195 ..................................32
      3-L195G ................................32
      3-L20 ....................................32
      3-L20G ..................................32
      3-L21 ....................................32
      3-L21G ..................................32
      3-L22 ....................................32
      3-L22G ..................................32
      3-L23D11 ..............................32
      3-L23D13 ..............................32
      3-L23D15 ..............................32
      3-L23D5 ................................32
      3-L23D7 ................................32
      3-L23D9 ................................32
      3-L25 ....................................32
      3-L25G ..................................32
      3-L26 ....................................32
      3-L26G ..................................32
      3-L27 ....................................32
      3-L27G ..................................32
      3-L28P13 ..............................32
      3-L28P15 ..............................32
      3-L28P17 ..............................32
      3-L28P19 ..............................32
      3-L30 ....................................32
      3-L30G ..................................32
      3-L31 ....................................32
      3-L32 ....................................32
      3-L32G ..................................32
      3-L33R23 ..............................32
      3-L33R25 ..............................32
      3-L33R27 ..............................32
      3-PA0 ..............................11, 15
      3-PA3 ..............................11, 15
      3-PB1 ..............................11, 15
      3-PB11 ............................11, 15
      3-PB3 ..............................11, 15
      3-PB5 ..............................11, 15
      3-PB7 ..............................11, 15
      3-PB9 ..............................11, 15
      3-PC5 .............................11, 15
      3-PC7 .............................11, 15
      3-PC9 .............................11, 15
      3-PD11 ...........................11, 15
      3-PD13 ...........................11, 15
      3-PD15 ...........................11, 15
      3-PD5 .............................11, 15
      3-PD7 .............................11, 15
      3-PD9 .............................11, 15
      3-R15 ....................................32
      3-R16 ....................................32
      3-R17 ....................................32
      3-R195 ..................................32
      3-R20 ....................................32
      3-R21 ....................................32
      3-R22 ....................................32
      3-R23D11 .............................32
      3-R23D13 .............................32
      3-R23D15 .............................32
      3-R23D5 ...............................32
      3-R23D7 ...............................32
      3-R23D9 ...............................32
      3-R25 ....................................32
      3-R26 ....................................32
      3-R27 ....................................32
      3-R28P13 .............................32
      3-R28P15 .............................32
      3-R28P17 .............................32
      3-R28P19 .............................32
      3-R30 ....................................32
      3-R31A .................................32
      3-R32 ....................................32
      3-R33R23 .............................32
      3-R33R25 .............................32
      3-R33R27 .............................32
      3-S20 ....................................56
      3-S20BS ...............................56
      3-S21 ....................................56
      3-S21BS ...............................56
      3-S22 ....................................56
      3-SA0 ....................................15
      3-SA3 ....................................15
      3-SB1 ....................................15
      3-SB11 ..................................15
      3-SB3 ....................................15
      3-SB5 ....................................15
      3-SB7 ....................................15
      3-SB9 ....................................15
      3-SC5 ...................................15
      3-SC7 ...................................15
      3-SC9 ...................................15
      3-SD11 .................................15
      3-SD13 .................................15
      3-SD5 ...................................15
      3-SD7 ...................................15
      3-SD9 ...................................15
      3-T20 ....................................57
      3-T20BS ...............................57
      3-T21 ....................................57
      3-T21BS ...............................57
      3-T22 ....................................57
      40....................................12, 16
      400........................................12
      4000......................................16
      4000-A ..................................16
      4004......................................12
      4006......................................12
      4008......................................12
      400-A ....................................12
      404..................................12, 16
      40400....................................16
      4050......................................12
      40500....................................16
      406..................................12, 16
      40600....................................16
      408..................................12, 16
      40800....................................16
      40G .................................12, 16
      40-SB3 ..................................12
      40-SB7 ..................................12
      40-SD11 ...............................12
      40-SD13 ...............................12
      40-SD7 .................................12
      40-SD9 .................................12
      40-SP13 ................................12
      40-SP15 ................................12
      40-SP17 ................................12
      40-SP19 ................................12
      41....................................12, 16
      410........................................12
      4100......................................16
      4100-A ..................................16
      410-A ....................................12
      41G .................................12, 16
      42....................................12, 16
      420........................................12
      4200......................................16
      42G .................................12, 16
      43....................................12, 16
      430........................................12
      4300......................................16
      43G .................................12, 16
      44....................................12, 16
      440........................................12
      4400......................................16
      45....................................12, 16
      450........................................12
      4500......................................16
      4B1 .......................................66
      4B3 .......................................66
      4B5 .......................................66
      4B7 .......................................66
      4C7 .......................................66
      4C9 .......................................66
      4D11 .....................................66
      4D13 .....................................66
      4D15 .....................................66
      4D5 .......................................66
      4D7 .......................................66
      4D9 .......................................66
      4DBP-50F .............................49
      4DBP-50FBS ........................49
      4DBS-50F .............................49
      4DBS-50FBS ........................49
      4FD11 ...................................66
      4FD15 ...................................66
      4FD7 .....................................66
      4FD9 .....................................66
      4-HP10 .................................36
      4-HP26 .................................36
      4-HP26BS .............................36
      4-HRC-K ...............................37
      4-KP10 ..................................36
      4-KP26 ..................................36
      4-KP26BS .............................36
      4-KP26-VB ............................37
      4LA0 ...............................29, 66
      4LA3 ...............................29, 66
      4LB3 ...............................29, 66
      4LB5 ...............................29, 66
      4P13 .....................................66
      4P15 .....................................66
      4P17 .....................................66
      4P19 .....................................66
      4-PB1 ..............................12, 16
      4-PB11 ............................12, 16
      4-PB3 ..............................12, 16
      4-PB5 ..............................12, 16
      4-PB7 ..............................12, 16
      4-PB9 ..............................12, 16
      4-PD11 ...........................12, 16
      4-PD13 ...........................12, 16
      4-PD15 ...........................12, 16
      4-PD5 .............................12, 16
      4-PD7 .............................12, 16
      4-PD9 .............................12, 16
      4-PP13 ............................12, 16
      4-PP15 ............................12, 16
      4-PP17 ............................12, 16
      4-PP19 ............................12, 16
      4RA0 ...............................28, 66
      4RA3 ...............................28, 66
      4RB1 ...............................28, 66
      4RB3 ...............................28, 66
      4RB5 ...............................28, 66
      4RB7 ...............................28, 66
      4RD11 ............................28, 66
      4RD7 ..............................28, 66
      4RD9 ..............................28, 66
      4-S25 ....................................56
      4-S25BS ...............................56
      4-S26 ....................................56
      4-S26BS ...............................56
      4-S27 ....................................56
      4-SB11 ..................................16
      4-SB3 ....................................16
      4-SB5 ....................................16
      4-SB7 ....................................16
      4-SB9 ....................................16
      4-SC7 ...................................16
      4-SD11 .................................16
      4-SD15 .................................16
      4-SD5 ...................................16
      4-SD7 ...................................16
      4-SD9 ...................................16
      4-SP13 ..................................16
      4-SP15 ..................................16
      4-SP17 ..................................16
      4-SP19 ..................................16
      4-T25 ....................................57
      4-T25BS ...............................57
      4-T26 ....................................57
      4-T26BS ...............................57
      4-T27 ....................................57
      50....................................13, 17
      500........................................13
      5000......................................17
      5000-A ..................................17
      500-A ....................................13
      501........................................13
      50100....................................17
      50400....................................17
      50500....................................17
      50G .................................13, 17
      50-SD13 ...............................13
      50-SD7 .................................13
      50-SP13 ................................13
      50-SP15 ................................13
      50-SP17 ................................13
      50-SP19 ................................13
      50-SR23 ...............................13
      50-SR25 ...............................13
      50-SR27 ...............................13
      510........................................13
      5100......................................17
      52....................................13, 17
      520........................................13
      5200......................................17
      52G .................................13, 17
      53....................................13, 17
      530........................................13
      5300......................................17
      53-A ................................13, 17
      53G .................................13, 17
      54....................................13, 17
      540........................................13
      5400......................................17
      54G .................................13, 17
      55....................................13, 17
      550........................................13
      5500......................................17
      55G .................................13, 17
      56....................................13, 17
      56G .................................13, 17
      57....................................13, 17
      570........................................13
      5700......................................17
      580........................................13
      5800......................................17
      585..................................13, 17
      585G ...............................13, 17
      59....................................13, 17
      590........................................13
      5900......................................17
      59G .................................13, 17
      5D11 .....................................66
      5D13 .....................................66
      5D15 .....................................66
      5D5 .......................................66
      5D7 .......................................66
      5D9 .......................................66
      5-PB1 ..............................13, 17
      5-PB3 ..............................13, 17
      5-PB5 ..............................13, 17
      5-PB7 ..............................13, 17
      5-PD11 ...........................13, 17
      5-PD13 ...........................13, 17
      5-PD15 ...........................13, 17
      5-PD5 .............................13, 17
      5-PD7 .............................13, 17
      5-PD9 .............................13, 17
      5-PP13 ............................13, 17
      5-PP15 ............................13, 17
      5-PP17 ............................13, 17
      5-PP19 ............................13, 17
      5-PR23 ...........................13, 17
      5-PR25 ...........................13, 17
      5-PR27 ...........................13, 17
      5RB1 .....................................66
      5RB3 .....................................66
      5RB5 .....................................66
      5RB7 .....................................66
      5RC7 ....................................66
      5RD11 ..................................66
      5RD7 ....................................66
      5RD9 ....................................66
      5-SD11 .................................17
      5-SD13 .................................17
      5-SD15 .................................17
      5-SD5 ...................................17
      5-SD7 ...................................17
      5-SD9 ...................................17
      5-SP13 ..................................17
      5-SP15 ..................................17
      5-SP17 ..................................17
      5-SP19 ..................................17
      5-SR23 .................................17
      5-SR25 .................................17
      5-SR27 .................................17
      60....................................13, 17
      60G .................................13, 17
      61....................................13, 17
      61G .................................13, 17
      6200......................................18
      6300......................................18
      6400......................................18
      64A .......................................18
      64GA ....................................18
      6500......................................18
      65A .......................................18
      65GA ....................................18
      6600......................................18
      66A .......................................18
      66GA ....................................18
      6700......................................18
      67A .......................................18
      67GA ....................................18
      6800......................................18
      68A .......................................18
      6900......................................18
      69A .......................................18
      6-B3 ......................................28
      6-B5 ......................................28
      6-B7 ......................................28
      6-B9 ......................................28
      6DBP-75F .............................49
      6DBP-75FBS ........................49
      6DBS-75F .............................49
      6DBS-75FBS ........................49
      6-D11 ....................................28
      6-D5 ......................................28
      6-D7 ......................................28
      6-D9 ......................................28
      6FFP25 .................................43
      6FFS25 .................................43
      6-HP12 .................................36
      6-HP31 .................................36
      6-HP31BS .............................36
      6-HRC-K ...............................37
      6-KP12 ..................................36
      6-KP31 ..................................36
      6-KP31BS .............................36
      6-KP31-VB ............................37
      6P13 .....................................66
      6P15 .....................................66
      6P17 .....................................66
      6P19 .....................................66
      6R23 .....................................66
      6R25 .....................................66
      6R27 .....................................66
      6-S30 ....................................56
      6-S30BS ...............................56
      6-S31 ....................................56
      6-S31BS ...............................56
      6-S32 ....................................56
      6-T30 ....................................57
      6-T31 ....................................57
      6-T32 ....................................57
      7000......................................18
      70A .......................................18
      70GA ....................................18
      71A .......................................18
      71GA ....................................18
      720B1 ...................................66
      720B3 ...................................66
      720B5 ...................................66
      720B7 ...................................66
      72A .......................................18
      7-B11 ....................................29
      7-B3 ......................................29
      7-B5 ......................................29
      7-B7 ......................................29
      7P13 .....................................66
      7P15 .....................................66
      7P17 .....................................66
      7P19 .....................................66
      800........................................11
      8DBP-100F ...........................49
      8DBP-100FBS ......................49
      8DBS-100F ...........................49
      8DBS-100FBS ......................49
      8-GHP-75M ..........................58
      8-GHS-75FS .........................58
      8-GHS-75FS-V .....................58
      8-HP16 .................................36
      8-HP36 .................................36
      8-HP36BS .............................36
      8-HRC-K ...............................37
      8-KP16 ..................................36
      8-KP36 ..................................36
      8-KP36BS .............................36
      8P13 .....................................66
      8P15 .....................................66
      8P17 .....................................66
      8P19 .....................................66
      8R23 .....................................66
      8R25 .....................................66
      8R27 .....................................66
      8-S35 ....................................56
      8-S35BS ...............................56
      8-S36 ....................................56
      8-S36BS ...............................56
      8-S37 ....................................56
      8-T35 ....................................57
      8-T36 ....................................57
      8-T36BS ...............................57
      8-T37 ....................................57
      900........................................11
      902-14-143M ........................62
      902-18-143M ........................62
      902-23-143M ........................62
      902-3-143 .............................59
      903-8-143 .............................59
      914-26-143M ........................62
      914-3-143 .............................59
      914-3-143M ..........................62
      96-P31 ..................................44
      96-P36 ..................................44
      96-P41 ..................................44
      96-S31 ..................................44
      96-S36 ..................................44
      96-S41 ..................................44
      9-MBR ............................28, 67
      A1 .........................................29
      A2 .........................................29
      A-375 ....................................67
      A-394 ....................................67
      A3P .......................................29
      A-402 ....................................67
      A4-L ......................................29
      A5-L ......................................29
      A7 .........................................29
      A8 .........................................29
      A9 .........................................29
      B-10 ................................11, 15
      B10-H41 ...............................38
      B10-K41 ................................38
      B10-T40 ................................57
      B10-T40BS ...........................57
      B10-T41 ................................57
      B10-T41BS ...........................57
      B12-FS-75F-13 .....................64
      B12-H41 ...............................38
      B12-H41BS ...........................38
      B12-H46 ...............................38
      B12-H46BS ...........................38
      B12-K41 ................................38
      B12-K41BS ...........................38
      B12-K46 ................................38
      B12-K46BS ...........................38
      B12-T45 ................................57
      B12-T45BS ...........................57
      B12-T46 ................................57
      B12-T46BS ...........................57
      B16-FS-100F-21 ...................64
      B16-T50 ................................57
      B16-T51 ................................57
      B16-T51BS ...........................57
      B-17 ................................11, 15
      B1-H11 .................................36
      B1-K11 ..................................36
      B1-K11-VB ............................37
      B1-T10 ..................................57
      B1-T10BS .............................57
      B1-T11 ..................................57
      B1-T11BS .............................57
      B1-T12 ..................................57
      B1-T15 ..................................57
      B1-T17 ..................................57
      B20-H51 ...............................38
      B20-H51BS ...........................38
      B20-H56 ...............................38
      B20-H56BS ...........................38
      B20-H61 ...............................38
      B20-H61BS ...........................38
      B20-K51 ................................38
      B20-K51BS ...........................38
      B20-K56 ................................38
      B20-K56BS ...........................38
      B20-K61 ................................38
      B20-K61BS ...........................38
      B20-T55 ................................57
      B20-T56 ................................57
      B23AS-25F ...........................21
      B23AS-25FBS ......................21
      B23AS-25H ...........................21
      B23AS-25M ..........................21
      B23AS-25MBST ...................21
      B23AS-31H ...........................21
      B23AS-37F ...........................21
      B23AS-37FBS ......................21
      B23AS-37H ...........................21
      B23AS-37M ..........................21
      B23AS-37MBST ...................21
      B23AS-50FBS ......................21
      B23AS-50H ...........................21
      B23AS-50MBST ...................21
      B24AS-25F ...........................22
      B24AS-25FBS ......................22
      B24AS-25H ...........................22
      B24AS-25M ..........................22
      B24AS-25MBST ...................22
      B24AS-31H ...........................22
      B24AS-37FBS ......................22
      B24AS-37H ...........................22
      B24AS-37MBST ...................22
      B24AS-50FBS ......................22
      B24AS-50H ...........................22
      B24AS-50MBST ...................22
      B24-FS-150F-45 ...................64
      B2-H16 .................................36
      B2-H16BS .............................36
      B2-K16 ..................................36
      B2-K16BS .............................36
      B2-K16-VB ............................37
      B2-T15 ..................................57
      B2-T15BS .............................57
      B2-T16 ..................................57
      B2-T16BS .............................57
      B2-T17 ..................................57
      B3-H21 .................................36
      B3-H21BS .............................36
      B3-H21Y ...............................37
      B3-K21 ..................................36
      B3-K21-192 ..........................37
      B3-K21BS .............................36
      B3-K21-VB ............................37
      B3-T20 ..................................57
      B3-T20BS .............................57
      B3-T21 ..................................57
      B3-T21BS .............................57
      B3-T22 ..................................57
      B-40 ................................12, 16
      B-406 ..............................12, 16
      B-42 ................................12, 16
      B-43 ................................12, 16
      B4-FS-25F-2 .........................64
      B4-HP26 ...............................36
      B4-HP26BS ..........................36
      B4-KP26 ...............................36
      B4-KP26BS ..........................36
      B4-T25 ..................................57
      B4-T25BS .............................57
      B4-T26 ..................................57
      B4-T26BS .............................57
      B4-T27 ..................................57
      B-52 ................................13, 17
      B-54 ................................13, 17
      B-60 ................................13, 17
      B-64A ....................................18
      B-66A ....................................18
      B6-FS-37F-5 .........................64
      B6-HP31 ...............................36
      B6-HP31BS ..........................36
      B6-KP31 ...............................36
      B6-KP31BS ..........................36
      B6-KP31-VB .........................37
      B6-T30 ..................................57
      B6-T30BS .............................57
      B6-T31 ..................................57
      B6-T31BS .............................57
      B6-T32 ..................................57
      B-71A ....................................18
      B8-FS-50F-8 .........................64
      B8-HP36 ...............................36
      B8-HP36BS ..........................36
      B8-KP36 ...............................36
      B8-KP36BS ..........................36
      B8-T35 ..................................57
      B8-T35BS .............................57
      B8-T36 ..................................57
      B8-T36BS .............................57
      B8-T37 ..................................57
      FA3RL-37M ..........................70
      FA25F-25M ...........................70
      FA25F-37M ...........................70
      FA25LI-25M ..........................70
      FA25M-25M ..........................70
      FA25P-25M ...........................70
      FA37F-37M ...........................70
      FA37H-37M ..........................70
      FA37M-37M ..........................70
      FA37P-25M ...........................70
      FA37P-37M ...........................70
      FL96-075 ..............................44
      FL96-100 ..............................44
      FL96-125 ..............................44
      FTP-251 ................................60
      FTP-251BST .........................60
      FTP-251-F ............................60
      FTP-251-FBS .......................60
      FTP-252 ................................60
      FTP-252BST .........................60
      FTP-252-F ............................60
      FTP-252-FBS .......................60
      FTP-253 ................................60
      FTP-253-F ............................60
      FTP-352 ................................60
      FTP-352BST .........................60
      FTP-352-F ............................60
      FTP-352-FBS .......................60
      FTP-353 ................................60
      FTP-353BST .........................60
      FTP-353-F ............................60
      FTP-353-FBS .......................60
      FTP-354 ................................60
      FTP-354-F ............................60
      FTP-554 ................................60
      FTP-554-F ............................60
      FTP-556 ................................60
      FTP-556-F ............................60
      FTS-204 ................................60
      FTS-204HP ...........................60
      FTS-204V .............................60
      FTS-204VHP ........................60
      FTS-205 ................................60
      FTS-205V .............................60
      FTS-206 ................................60
      FTS-206HP ...........................60
      FTS-206V .............................60
      FTS-206VHP ........................60
      FTS-214 ................................60
      FTS-214HP ...........................60
      FTS-214V .............................60
      FTS-214VHP ........................60
      FTS-215 ................................60
      FTS-215V .............................60
      FTS-216 ................................60
      FTS-216HP ...........................60
      FTS-216V .............................60
      FTS-216VHP ........................60
      FTS-224 ................................60
      FTS-224HP ...........................60
      FTS-224V .............................60
      FTS-224VHP ........................60
      FTS-225 ................................60
      FTS-225V .............................60
      FTS-226 ................................60
      FTS-226HP ...........................60
      FTS-226V .............................60
      FTS-226VHP ........................60
      FTS-306 ................................60
      FTS-306HP ...........................60
      FTS-306V .............................60
      FTS-306VHP ........................60
      FTS-308 ................................60
      FTS-308HP ...........................60
      FTS-308V .............................60
      FTS-308VHP ........................60
      FTS-316 ................................60
      FTS-316HP ...........................60
      FTS-316V .............................60
      FTS-316VHP ........................60
      FTS-318 ................................60
      FTS-318HP ...........................60
      FTS-318V .............................60
      FTS-318VHP ........................60
      FTS-326 ................................60
      FTS-326HP ...........................60
      FTS-326V .............................60
      FTS-326VHP ........................60
      FTS-328 ................................60
      FTS-328HP ...........................60
      FTS-328V .............................60
      FTS-328VHP ........................60
      FTS-504 ................................60
      FTS-504HP ...........................60
      FTS-504V .............................60
      FTS-504VHP ........................60
      FTS-506 ................................60
      FTS-506HP ...........................60
      FTS-506V .............................60
      FTS-506VHP ........................60
      GD 10526 41 ........................23
      GD 10526 83 ........................23
      GD 10536 41 ........................23
      GD 10536 83 ........................23
      GD 10556 01 ........................23
      GD 10556 67 ........................23
      GHP-11 .................................58
      GHS-12 .................................58
      GHS-12-V .............................58
      GMP1250F ...........................62
      GMS1250FH .........................62
      GR-600 .................................28
      GR-600-43 ............................28
      GR-600-63 ............................28
      GR-601 .................................28
      GR-602 .................................28
      GR-603 .................................28
      GR-604 .................................28
      GR-604R ..............................28
      GR-605 .................................28
      GR-605R ..............................28
      GR-606 .................................28
      GR-606P ...............................28
      GR-606P-SL .........................28
      GR-606-SL ...........................28
      GR-607 .................................28
      GR-607-SL ...........................28
      GR-608 .................................28
      GR-608P ...............................28
      GR-608-SL ...........................28
      GR-6-0A3 .............................28
      GR-6-0B3 .............................28
      GR-6-0B3-SL ........................28
      GR-6-0B5 .............................28
      GR-6-0B5-SL ........................28
      GR-6-0B7 .............................28
      GR-6-0B7-SL ........................28
      GR-6-0C5 .............................28
      GR-6-0C7 .............................28
      GR-6-0C9 .............................28
      GR-6-0D11 ...........................28
      GR-6-0D7 .............................28
      GR-6-0D9 .............................28
      H25HHU ...............................67
      H25MHU ...............................67
      H37HHU ...............................67
      HA 15011 00 .........................41
      HA 15012 00 .........................41
      HA 15021 00 .........................41
      HA 15022 00 .........................41
      HA 15031 00 .........................41
      HA 15032 00 .........................41
      HA 15036 00 .........................41
      HA 15041 00 .........................41
      HA 15042 00 .........................41
      HA 15051 00 .........................41
      HA 15052 00 .........................41
      HA 15211 00 .........................41
      HA 15212 00 .........................41
      HA 15221 00 .........................41
      HA 15222 00 .........................41
      HA 15231 00 .........................41
      HA 15232 00 .........................41
      HA 15236 00 .........................41
      HA 15241 00 .........................41
      HA 15242 00 .........................41
      HA 15251 00 .........................41
      HA 15252 00 .........................41
      HHU25F ................................67
      HHU25M ...............................67
      HHU37H ...............................67
      HL2-T15 ................................57
      HL2-T16 ................................57
      HL3-T20 ................................57
      HL3-T21 ................................57
      HP 15111 00 .........................69
      HP 15112 00 .........................69
      HP 15121 00 .........................69
      HP 15122 00 .........................69
      HP 15131 00 .........................69
      HP 15132 00 .........................69
      HP 15141 00 .........................69
      HP 15142 00 .........................69
      HP 15151 00 .........................69
      HP 15152 00 .........................69
      HP3PS37F ............................46
      HP3SB37M ...........................46
      HS-30 ...................................67
      HS-31 ...................................67
      HS-32 ...................................67
      HS-33 ...................................67
      HS-34 ...................................67
      HSC-B1 ................................67
      HSC-B3 ................................67
      HSC-B7 ................................67
      HSC-C7 ................................67
      HSC-C9 ................................67
      HSC-D11 ..............................67
      HSC-D5 ................................67
      HSC-D7 ................................67
      HSC-D9 ................................67
      LL-10 ..............................11, 15
      LL-1000 ................................11
      LL10-H41 ..............................38
      LL10-H41BS .........................38
      LL10-K41 ..............................38
      LL10-K41BS .........................38
      LL10-S41 ..............................56
      LL10-T40 ..............................57
      LL10-T41 ..............................57
      LL-11 ..............................11, 15
      LL-1100 ................................11
      LL12-H41 ..............................38
      LL12-H41BS .........................38
      LL12-H46 ..............................38
      LL12-H46BS .........................38
      LL12-K41 ..............................38
      LL12-K41BS .........................38
      LL12-K46 ..............................38
      LL12-K46BS .........................38
      LL12-S46 ..............................56
      LL12-S46BS .........................56
      LL12-T46 ..............................57
      LL16-S51 ..............................56
      LL16-S51BS .........................56
      LL16-T50 ..............................57
      LL16-T50BS .........................57
      LL1-H11 ................................36
      LL1-H4 ..................................36
      LL1-K11 ................................36
      LL1-K4 ..................................36
      LL1-S10 ................................56
      LL1-S10BS ...........................56
      LL1-S11 ................................56
      LL1-S11BS ...........................56
      LL1-S12 ................................56
      LL1-S17 ................................56
      LL1-T10 ................................57
      LL1-T11 ................................57
      LL1-T11BS ...........................57
      LL1-T12 ................................57
      LL1-T17 ................................57
      LL20-H51 ..............................38
      LL20-H51BS .........................38
      LL20-H56 ..............................38
      LL20-H56BS .........................38
      LL20-H61 ..............................38
      LL20-H61BS .........................38
      LL20-K51 ..............................38
      LL20-K51BS .........................38
      LL20-K56 ..............................38
      LL20-K56BS .........................38
      LL20-K61 ..............................38
      LL20-K61BS .........................38
      LL2-H16 ................................36
      LL2-H16BS ...........................36
      LL2-H6 ..................................36
      LL2-K16 ................................36
      LL2-K16BS ...........................36
      LL2-K6 ..................................36
      LL2-S15 ................................56
      LL2-S15BS ...........................56
      LL2-S16 ................................56
      LL2-S16BS ...........................56
      LL2-S17 ................................56
      LL2-T15 ................................57
      LL2-T15BS ...........................57
      LL2-T16 ................................57
      LL2-T16BS ...........................57
      LL2-T17 ................................57
      LL3-H21 ................................36
      LL3-H21BS ...........................36
      LL3-H8 ..................................36
      LL3-K21 ................................36
      LL3-K21BS ...........................36
      LL3-K8 ..................................36
      LL3-S20 ................................56
      LL3-S20BS ...........................56
      LL3-S21 ................................56
      LL3-S21BS ...........................56
      LL3-S22 ................................56
      LL3-T20 ................................57
      LL3-T20BS ...........................57
      LL3-T21 ................................57
      LL3-T21BS ...........................57
      LL3-T22 ................................57
      LL4-HP10 .............................36
      LL4-HP26 .............................36
      LL4-HP26BS .........................36
      LL4-KP10 ..............................36
      LL4-KP26 ..............................36
      LL4-KP26BS .........................36
      LL4-S25 ................................56
      LL4-S25BS ...........................56
      LL4-S26 ................................56
      LL4-S26BS ...........................56
      LL4-S27 ................................56
      LL4-T25 ................................57
      LL4-T25BS ...........................57
      LL4-T26 ................................57
      LL4-T26BS ...........................57
      LL4-T27 ................................57
      LL6-HP12 .............................36
      LL6-HP31 .............................36
      LL6-HP31BS .........................36
      LL6-KP12 ..............................36
      LL6-KP31 ..............................36
      LL6-KP31BS .........................36
      LL6-S30 ................................56
      LL6-S31 ................................56
      LL6-S31BS ...........................56
      LL6-S32 ................................56
      LL6-T30 ................................57
      LL6-T30BS ...........................57
      LL6-T31 ................................57
      LL6-T31BS ...........................57
      LL6-T32 ................................57
      LL8-HP16 .............................36
      LL8-HP36 .............................36
      LL8-HP36BS .........................36
      LL8-KP16 ..............................36
      LL8-KP36 ..............................36
      LL8-KP36BS .........................36
      LL8-S36 ................................56
      LL8-S36BS ...........................56
      LL8-S37 ................................56
      LL8-T35 ................................57
      LL8-T36 ................................57
      LL8-T36BS ...........................57
      LLS16 ...................................67
      LLS20 ...................................67
      LLS24 ...................................67
      LLS26 ...................................67
      LLS30 ...................................67
      LLS35 ...................................67
      LNFT-200 ..............................60
      LNFT-300 ..............................60
      LNFT-500 ..............................60
      ML1-H11 ...............................36
      ML1-K11 ...............................36
      ML2-H16 ...............................36
      ML2-H16BS ..........................36
      ML2-K16 ...............................36
      ML2-K16BS ..........................36
      ML3-H21 ...............................36
      ML3-H21BS ..........................36
      ML3-K21 ...............................36
      ML3-K21BS ..........................36
      ML4-HP26 ............................36
      ML4-HP26BS ........................36
      ML4-KP26 .............................36
      ML4-KP26BS ........................36
      ML6-HP31 ............................36
      ML6-HP31BS ........................36
      ML6-KP31 .............................36
      ML6-KP31BS ........................36
      ML8-HP36 ............................36
      ML8-HP36BS ........................36
      ML8-KP36 .............................36
      ML8-KP36BS ........................36
      P2-STP-25M .........................58
      P2-STS-25H .........................58
      P3-STP-25M .........................58
      P3-STP-37H .........................58
      P3-STP-37M .........................58
      P3-STS-37H .........................58
      P4-30P-25M .........................19
      P4-30S-25H ..........................19
      P7-40P-37M .........................19
      P7-40S-37H ..........................19
      PDC-12-HK ...........................68
      PDC-1-HK .............................68
      PDC-2-HK .............................68
      PDC-3000 .............................68
      PDC-3-HK .............................68
      PDC-4-HK .............................68
      PDC-6-HK .............................68
      PDC-8-HK .............................68
      PDC-96-075 ..........................69
      PDC-96-100 ..........................69
      PDC-96-125 ..........................69
      PP2-H25F .............................37
      PP2-K25F .............................37
      P-PDC-1-HK .........................68
      P-PDC-2-HK .........................68
      P-PDC-3-HK .........................68
      P-PDC-4-HK .........................68
      P-PDC-6-HK .........................68
      P-PDC-8-HK .........................68
      P-SDC-1-HK .........................68
      P-SDC-2-HK .........................68
      P-SDC-3-HK .........................68
      P-SDC-4-HK .........................68
      P-SDC-6-HK .........................68
      P-SDC-8-HK .........................68
      QD 29111 00 ........................69
      QD 29112 00 ........................69
      QD 29121 00 ........................69
      QD 29122 00 ........................69
      QD 29141 00 ........................69
      QD 29142 00 ........................69
      QD 29151 00 ........................69
      QD 29152 00 ........................69
      RA 04210 00 .........................65
      RA 04220 00 .........................65
      RA 04230 00 .........................65
      RA 04240 00 .........................65
      RA 04250 00 .........................65
      RD-700 .................................29
      RD-701 .................................29
      RD-702 .................................29
      RD-703 .................................29
      RD-704 .................................29
      RD-704L ...............................29
      RD-705 .................................29
      RD-705L ...............................29
      RD-706 .................................29
      RD-706P ...............................29
      RD-706-SL ............................29
      RD-707 .................................29
      RD-707-SL ............................29
      RD-708 .................................29
      RD-708-SL ............................29
      RD-7-0A3 ..............................29
      RD-7-0B3 ..............................29
      RD-7-0B3-SL ........................29
      RD-7-0B5 ..............................29
      RD-7-0B5-SL ........................29
      RD-7-0B7 ..............................29
      RD-7-0D11 ...........................29
      RD-7-0D7 .............................29
      RD-7-0D9 .............................29
      S19 .......................................67
      S20 .......................................67
      S205 .....................................67
      S21 .......................................67
      S22 .......................................67
      S23 .......................................67
      S24 .......................................67
      S25 .......................................67
      S26 .......................................67
      SDC-12-HK ...........................68
      SDC-1-HK .............................68
      SDC-20-HK ...........................68
      SDC-4DB ..............................68
      SDC-8DB ..............................68
      SDC-2-HK .............................68
      SDC-3000 .............................68
      SDC-3-HK .............................68
      SDC-4-HK .............................68
      SDC-6-HK .............................68
      SDC-8-HK .............................68
      SDC-96-075 ..........................69
      SDC-96-100 ..........................69
      SDC-96-125 ..........................69
      SN16 .....................................67
      SN17 .....................................67
      SN18 .....................................67
      UL1-H11 ...............................36
      UL1-K11 ...............................36
      UL2-H16 ...............................36
      UL2-K16 ...............................36
      UL3-H21 ...............................36
      UL3-K21 ...............................36
      UL-600 ..................................28
      UL-601 ..................................28
      UL-602 ..................................28
      UL-603 ..................................28
      UL-604 ..................................28
      UL-604R ...............................28
      UL-605 ..................................28
      UL-605R ...............................28
      UL-700 ..................................29
      UL-702 ..................................29
      UL-703 ..................................29
      UL-704 ..................................29
      UL-704L ................................29
      UL-705 ..................................29
      UL-705L ................................29
      UP10P-25F ...........................45
      UP10P-25M ..........................45
      UP10P-37F ...........................45
      UP10P-37M ..........................45
      UP10S-25F ...........................45
      UP10S-25M ..........................45
      UP10S-37F ...........................45
      UP10S-37M ..........................45
      VFT-200 ................................59
      VFT-300 ................................59
      VFT-500 ................................59
      VS-3000 ................................59
      VSFT-200 ..............................59
      VSFT-500 ..............................59
      W11J340 ..............................52
      W11J54041 ..........................52
      W11J64041 ..........................52
      W11M340 .............................52
      W11M540 .............................52
      W11M640 .............................52
      W28A34N .............................52
      W28A54N .............................52
      W28A64N .............................52
      W54A32N .............................52
      W54A33N .............................52
      W54A52N .............................52
      W54A53N .............................52
      W54A62N .............................52
      W60L38012 ..........................52
      W60L38038 ..........................52
      W60L58058 ..........................52
      W60L68078 ..........................52
      W62A34N .............................52
      W62A54N .............................52
      W62A64N .............................52
      WA 10034 I0 .........................51
      WA 10034 M0 .......................51
      WA 10037 I0 .........................51
      WA 10037 M0 .......................51
      WA 10054 I0 .........................51
      WA 10054 M0 .......................51
      WA 10057 I0 .........................51
      WA 10057 M0 .......................51
      WA 10064 I0 .........................51
      WA 10064 M0 .......................51
      WA 10067 I0 .........................51
      WA 10067 M0 .......................51
      WA 10134 00 ..................52, 69
      WA 10137 00 ..................52, 69
      WA 10154 00 ..................52, 69
      WA 10157 00 ..................52, 69
      WA 10164 00 ..................52, 69
      WA 10167 00 ..................52, 69
      WA 56114 00 ........................69
      WA 56117 00 ........................69
      WA 56124 00 ........................69
      WA 56127 00 ........................69
      WA 56514 00 ........................46
      WA 56517 00 ........................46
      WA 56524 00 ........................46
      WA 56527 00 ........................46
      WFT-200-228 ........................59
      WFT-300-228 ........................59
      WFT-500-228 ........................59


       

      Since 2007
         


      美國DMK Engineering Solutions公司
      信德邁科技(北京)有限公司 CNMEC Technology


      地址:北京市朝陽區望京街10號望京SOHO塔1C座2115室
      郵編:100102
      電話:010-8428 2935, 8428 3983
      手機:139 1096 2635
      Http://www.0591w.com
      E-mail:sales@cnmec.biz
      傳真:010-8428 8762


      京ICP備08000876號-1
      京公網安備 11010502019740
      Since 2007 Strong Distribution & Powerful Partnerships